- 您现在的位置：买卖IC网 > PDF目录12790 > HMK316B7474KL-T (Taiyo Yuden)CAP CER 0.47UF 100V 10% X7R 1206 PDF资料下载
参数资料
| 型号： | HMK316B7474KL-T |
| 厂商： | Taiyo Yuden |
| 文件页数： | 16/20页 |
| 文件大小： | 0K |
| 描述： | CAP CER 0.47UF 100V 10% X7R 1206 |
| 产品变化通告： | X5R, X7R Part Number Change |
| 产品目录绘图： | xMK Series_1206_1.6 |
| 标准包装： | 1 |
| 系列： | M |
| 电容： | 0.47µF |
| 电压 - 额定： | 100V |
| 容差： | ±10% |
| 温度系数： | X7R |
| 安装类型： | 表面贴装，MLCC |
| 工作温度： | -55°C ~ 125°C |
| 应用： | 通用 |
| 封装/外壳： | 1206（3216 公制） |
| 尺寸/尺寸： | 0.126" L x 0.063" W（3.20mm x 1.60mm） |
| 厚度（最大）： | 0.071"（1.80mm） |
| 特点： | 高电压 |
| 包装： | 标准包装 |
| 产品目录页面： | 2172 (CN2011-ZH PDF) |
| 其它名称： | 587-1450-6 |
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Precautions on the use of Multilayer Ceramic Capacitors
■ PRECAUTIONS
1. Circuit Design
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
Precautions
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
Precautions
（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations （Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations （Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）Recommended land dimensions for typical chip capacitors
●Multilayer Ceramic Capacitors : Recommended land dimensions
（unit: mm）
Land patterns for PCBs
Land pattern
Wave-soldering
Chip capacitor
Solder-resist
Type
107
212
316
325
Size
L 1.6 2.0 3.2 3.2
W 0.8 1.25 1.6 2.5
A 0.8 to 1.0 1.0 to 1.4 1.8 to 2.5 1.8 to 2.5
B 0.5 to 0.8 0.8 to 1.5 0.8 to 1.7 0.8 to 1.7
C
B A B
C 0.6 to 0.8 0.9 to 1.2 1.2 to 1.6 1.8 to 2.5
Chip capacitor
W
Technical
considerations
Reflow-soldering
L
Type
042
063
105
107
212
316
325
432
Size
L 0.4 0.6 1.0
W 0.2 0.3 0.5
A 0.15 to 0.25 0.20 to 0.30 0.45 to 0.55
B 0.15 to 0.20 0.20 to 0.30 0.40 to 0.50
C 0.15 to 0.30 0.25 to 0.40 0.45 to 0.55
1.6 2.0 3.2
0.8 1.25 1.6
0.8 to 1.0 0.8 to 1.2 1.8 to 2.5
0.6 to 0.8 0.8 to 1.2 1.0 to 1.5
0.6 to 0.8 0.9 to 1.6 1.2 to 2.0
3.2
2.5
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
4.5
3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
Note：Recommended land size might be different according
to the allowance of the size of the product.
●LWDC: Recommended land dimensions for reflow-soldering
（unit: mm）
LWDC
Type
105
107
212
Size
L 0.52 0.8 1.25
W 1.0 1.6 2.0
A 0.18 to 0.22 0.25 to 0.3 0.5 to 0.7
B 0.2 to 0.25 0.3 to 0.4 0.4 to 0.5
C 0.9 to 1.1 1.5 to 1.7 1.9 to 2.1
L
W
? This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
相关PDF资料 |
PDF描述 |
|---|---|
| C3225Y5V1H475Z/1.15 | CAP CER 4.7UF 50V Y5V 1210 |
| C2012X5R0J685M/1.25 | CAP CER 6.8UF 6.3V 20% X5R 0805 |
| VE-B5W-CY-S | CONVERTER MOD DC/DC 5.5V 50W |
| VE-B5V-CY-S | CONVERTER MOD DC/DC 5.8V 50W |
| C2012X5R0J685K/1.25 | CAP CER 6.8UF 6.3V 10% X5R 0805 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| HMK316B7683KL-T | 制造商:TAIYO YUDEN 功能描述:Cut Tape 制造商:Taiyo Yuden 功能描述:Ceramic capacitor 1206 X7R 100V 68nF 制造商:Taiyo Yuden 功能描述:Cap Ceramic 0.068uF 100V X7R 10% SMD 1206 125°C Embossed T/R |
| HMK316BJ104KL-T | 制造商:TAIYO YUDEN 功能描述:Ceramic Multilayer Capacitor 制造商:Taiyo Yuden 功能描述:Ceramic capacitor 1206 X5R 100V 100nF 制造商:Taiyo Yuden 功能描述:Medium-High Voltage Ceramic Capacitor |
| HMK316BJ105KL-T | 制造商:TAIYO YUDEN 功能描述:Cut Tape 制造商:Taiyo Yuden 功能描述:Ceramic capacitor 1206 X5R 100V 1uF |
| HMK316BJ105ML-T | 功能描述:1μF ±20% 100V 陶瓷电容器 X5R 1206（3216 公制） 制造商:taiyo yuden 系列:M 包装:剪切带（CT） 零件状态:在售 电容:1μF 容差:±20% 电压 - 额定:100V 温度系数:X5R 工作温度:-55°C ~ 85°C 特性:- 等级:- 应用:SMPS 过滤器 故障率:- 安装类型:表面贴装，MLCC 封装/外壳:1206（3216 公制） 大小/尺寸:0.126" 长 x 0.063" 宽（3.20mm x 1.60mm） 高度 - 安装（最大值）:- 厚度（最大值）:0.071"（1.80mm） 引线间距:- 引线形式:- 标准包装:1 |
| HMK316BJ154KL-T | 制造商:TAIYO YUDEN 功能描述:Cut Tape 制造商:Taiyo Yuden 功能描述:Ceramic capacitor 1206 X5R 100V 150nF 制造商:Taiyo Yuden 功能描述:Cap Ceramic 0.15uF 100V X5R 10% SMD 1206 85°C Embossed T/R |
发布紧急采购，3分钟左右您将得到回复。