- 您现在的位置：买卖IC网 > PDF目录383096 > ICX258AL (Sony Corporation) Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras(对角线式、6毫米(1/3型)CCD图像传感器（用于EIA黑白摄像机）) PDF资料下载
参数资料
| 型号： | ICX258AL |
| 厂商： | Sony Corporation |
| 英文描述： | Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras(对角线式、6毫米(1/3型)CCD图像传感器（用于EIA黑白摄像机）) |
| 中文描述： | 对角线6毫米（类型1 / 3）CCD图像传感器的环境影响评估/黑白摄像机（对角线式，6毫米（1 / 3型）防治荒漠化公约图像传感器（用于评估黑白摄像机）） |
| 文件页数： | 10/17页 |
| 文件大小： | 183K |
| 代理商： | ICX258AL |
– 10 –
ICX258AL
5. Video signal shading
Set to standard imaging condition
III
. With the lens diaphragm at F5.6 to F8, adjust the luminous intensity
so that the average value of the signal output is 200mV. Then measure the maximum (Vmax [mV]) and
minimum (Vmin [mV]) values of the signal output and substitute the values into the following formula.
SH = (Vmax – Vmin)/200
×
100 [%]
6. Dark signal
Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature 60°C and
the device in the light-obstructed state, using the horizontal idle transfer level as a reference.
7. Dark signal shading
After measuring 6, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark
signal output and substitute the values into the following formula.
Vdt = Vdmax – Vdmin [mV]
8. Flicker
Set to standard imaging condition
III
. Adjust the luminous intensity so that the average value of the signal
output is 200mV, and then measure the difference in the signal level between fields (
Vf [mV]). Then
substitute the value into the following formula.
F = (
Vf/200)
×
100 [%]
9. Lag
Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it
strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following
formula.
Lag = (Vlag/200)
×
100 [%]
Vlag (lag)
Signal output 200mV
Light
FLD
V1
Strobe light
timing
Output
相关PDF资料 |
PDF描述 |
|---|---|
| ICX259AK | Diagonal 6mm (Type 1/3) CCD Image Sensor for PAL Color Video Cameras |
| ICX259AL | Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX262 | Timing Generator for Frame Readout CCD Image Sensor |
| ICX262AQ | Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX262AQF | Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICX259AK | 制造商:Sony Batteries 功能描述: |
| ICX259AL | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX262 | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Timing Generator and Signal Processor for Frame Readout CCD Image Sensor |
| ICX262AQ | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX262AQF | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
发布紧急采购，3分钟左右您将得到回复。