- 您现在的位置：买卖IC网 > PDF目录383096 > ICX258AL (Sony Corporation) Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras(对角线式、6毫米(1/3型)CCD图像传感器（用于EIA黑白摄像机）) PDF资料下载
参数资料
| 型号： | ICX258AL |
| 厂商： | Sony Corporation |
| 英文描述： | Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras(对角线式、6毫米(1/3型)CCD图像传感器（用于EIA黑白摄像机）) |
| 中文描述： | 对角线6毫米（类型1 / 3）CCD图像传感器的环境影响评估/黑白摄像机（对角线式，6毫米（1 / 3型）防治荒漠化公约图像传感器（用于评估黑白摄像机）） |
| 文件页数： | 15/17页 |
| 文件大小： | 183K |
| 代理商： | ICX258AL |
– 15 –
ICX258AL
Notes on Handling
1) Static charge prevention
CCD image sensors are easily damaged by static discharge. Before handling be sure to take the following
protective measures.
a) Either handle bare handed or use non-chargeable gloves, clothes or material.
Also use conductive shoes.
b) When handling directly use an earth band.
c) Install a conductive mat on the floor or working table to prevent the generation of static electricity.
d) Ionized air is recommended for discharge when handling CCD image sensor.
e) For the shipment of mounted substrates, use boxes treated for the prevention of static charges.
2) Soldering
a) Make sure the package temperature does not exceed 80°C.
b) Solder dipping in a mounting furnace causes damage to the glass and other defects. Use a ground 30W
soldering iron and solder each pin in less than 2 seconds. For repairs and remount, cool sufficiently.
c) To dismount an image sensor, do not use a solder suction equipment. When using an electric desoldering
tool, use a thermal controller of the zero cross On/Off type and connect it to ground.
3) Dust and dirt protection
Image sensors are packed and delivered by taking care of protecting its glass plates from harmful dust and
dirt. Clean glass plates with the following operation as required, and use them.
a) Perform all assembly operations in a clean room (class 1000 or less).
b) Do not either touch glass plates by hand or have any object come in contact with glass surfaces. Should
dirt stick to a glass surface, blow it off with an air blower. (For dirt stuck through static electricity ionized
air is recommended.)
c) Clean with a cotton bud and ethyl alcohol if the grease stained. Be careful not to scratch the glass.
d) Keep in a case to protect from dust and dirt. To prevent dew condensation, preheat or precool when
moving to a room with great temperature differences.
e) When a protective tape is applied before shipping, just before use remove the tape applied for
electrostatic protection. Do not reuse the tape.
4) Installing (attaching)
a) Remain within the following limits when applying a static load to the package. Do not apply any load more
than 0.7mm inside the outer perimeter of the glass portion, and do not apply any load or impact to limited
portions. (This may cause cracks in the package.)
Compressive strength
Cover glass
AAAA
Plastic package
1.2Nm
Torsional strength
AAAA
AAAA
AAAA
AAAA
AAAA
相关PDF资料 |
PDF描述 |
|---|---|
| ICX259AK | Diagonal 6mm (Type 1/3) CCD Image Sensor for PAL Color Video Cameras |
| ICX259AL | Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX262 | Timing Generator for Frame Readout CCD Image Sensor |
| ICX262AQ | Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX262AQF | Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ICX259AK | 制造商:Sony Batteries 功能描述: |
| ICX259AL | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 6mm (Type 1/3) CCD Image Sensor for CCIR B/W Video Cameras |
| ICX262 | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Timing Generator and Signal Processor for Frame Readout CCD Image Sensor |
| ICX262AQ | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
| ICX262AQF | 制造商:SONY 制造商全称:Sony Corporation 功能描述:Diagonal 8.933mm (Type 1/1.8) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras |
发布紧急采购，3分钟左右您将得到回复。