参数资料
| 型号： | ID82C54 |
| 厂商： | Intersil |
| 文件页数： | 6/22页 |
| 文件大小： | 0K |
| 描述： | IC OSC PROG TIMER 8MHZ 24DIP |
| 标准包装： | 165 |
| 类型： | 可编程计时器 |
| 频率： | 8MHz |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电流 - 电源： | 10mA |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 24-CDIP（0.600"，15.24mm） |
| 包装： | 管件 |
| 供应商设备封装： | 24-CDIP |
| 安装类型： | 通孔 |
14
82C54
Mode 3 Is Implemented As Follows
EVEN COUNTS -
OUT is initially high. The initial count is
loaded on one CLK pulse and then is decremented by two
on succeeding CLK pulses. When the count expires, OUT
changes value and the Counter is reloaded with the initial
count. The above process is repeated indefinitely.
ODD COUNTS -
OUT is initially high. The initial count is loaded
on one CLK pulse, decremented by one on the next CLK pulse,
and then decremented by two on succeeding CLK pulses.
When the count expires, OUT goes low and the Counter is
reloaded with the initial count. The count is decremented by
three on the next CLK pulse, and then by two on succeeding
CLK pulses. When the count expires, OUT goes high again and
the Counter is reloaded with the initial count. The above
process is repeated indefinitely. So for odd counts, OUT will be
high for (N + 1)/2 counts and low for (N - 1)/2 counts.
MODE 4: SOFTWARE TRIGGERED MODE
OUT will be initially high. When the initial count expires, OUT
will go low for one CLK pulse then go high again. The
counting sequence is “Triggered” by writing the initial count.
GATE = 1 enables counting; GATE = 0 disables counting.
GATE has no effect on OUT.
After writing a Control Word and initial count, the Counter will
be loaded on the next CLK pulse. This CLK pulse does not
decrement the count, so for an initial count of N, OUT does not
strobe low until N + 1 CLK pulses after the initial count is
written.
If a new count is written during counting, it will be loaded on
the next CLK pulse and counting will continue from the new
count. If a two-byte count is written, the following happens:
1. Writing the first byte has no effect on counting.
2. Writing the second byte allows the new count to be
loaded on the next CLK pulse.
This allows the sequence to be “retriggered” by software. OUT
strobes low N + 1 CLK pulses after the new count of N is
written.
MODE 5: HARDWARE TRIGGERED STROBE
(RETRIGGERABLE)
OUT will initially be high. Counting is triggered by a rising
edge of GATE. When the initial count has expired, OUT will
go low for one CLK pulse and then go high again.
After writing the Control Word and initial count, the counter
will not be loaded until the CLK pulse after a trigger. This
CLK pulse does not decrement the count, so for an initial
count of N, OUT does not strobe low until N + 1 CLK pulses
after trigger.
A trigger results in the Counter being loaded with the initial
count on the next CLK pulse. The counting sequence is
triggerable. OUT will not strobe low for N + 1 CLK pulses
after any trigger GATE has no effect on OUT.
If a new count is written during counting, the current counting
sequence will not be affected. If a trigger occurs after the
new count is written but before the current count expires, the
NNN
N
0
2
0
1
0
FF
FE
FF
FD
0
3
WR
CLK
GATE
OUT
CW = 18
LSB = 3
WR
CLK
GATE
OUT
WR
CLK
GATE
OUT
CW = 18
LSB = 3
CW = 18
LSB = 3
NN
N
0
3
0
2
0
1
0
2
0
1
0
FF
NN
N
0
3
0
3
0
2
0
1
0
FF
0
3
LSB = 2
N
FIGURE 13. MODE 4
相关PDF资料 |
PDF描述 |
|---|---|
| IDT2308A-4DCI8 | IC CLOCK MULT ZD HI DRV 16-SOIC |
| IDT2309-1HPGGI | IC CLK BUFFER ZD HI DRV 16-TSSOP |
| IDT2309A-1HPGG | IC CLK BUFFER ZD HI DRV 16-TSSOP |
| IDT2309B-1HPGGI | IC CLK BUFFER HIGH DRIVE 16TSSOP |
| IDT23S05-1HDCGI | IC CLK BUFFER PLL HI DRV 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ID82C54/+ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog Timer Circuit |
| ID82C54-10 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:CMOS Programmable Interval Timer |
| ID82C54-12 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:CMOS Programmable Interval Timer |
| ID82C55A | 功能描述:外围驱动器与原件 - PCI PERIPH PRG-I/O 5V 8MHZ 40CDIP IND RoHS:否 制造商:PLX Technology 工作电源电压: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:FCBGA-1156 封装:Tray |
| ID82C55A/+ | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Peripheral Interface |
发布紧急采购，3分钟左右您将得到回复。