- 您现在的位置：买卖IC网 > PDF目录9933 > IDT72V281L20PF (IDT, Integrated Device Technology Inc)IC FIFO 32768X18 20NS 64QFP PDF资料下载
参数资料
| 型号： | IDT72V281L20PF |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 3/26页 |
| 文件大小： | 0K |
| 描述： | IC FIFO 32768X18 20NS 64QFP |
| 标准包装： | 90 |
| 系列： | 72V |
| 功能： | 同步 |
| 存储容量： | 589K（32K x 18） |
| 数据速率： | 50MHz |
| 访问时间： | 20ns |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 64-LQFP |
| 供应商设备封装： | 64-TQFP（14x14） |
| 包装： | 托盘 |
| 其它名称： | 72V281L20PF |
11
COMMERCIAL AND INDUSTRIAL
TEMPERATURE RANGES
IDT72V281/72V291 3.3V CMOS SUPERSYNC FIFOTM
65,536 x 9 and 131,072 x 9
Parallel reading of the offset registers is always permitted regardless of
which timing mode (IDT Standard or FWFT modes) has been selected.
RETRANSMIT OPERATION
The Retransmit operation allows data that has already been read to be
accessed again. There are two stages: first, a setup procedure that resets
the read pointer to the first location of memory, then the actual retransmit,
which consists of reading out the memory contents, starting at the beginning
of memory.
Retransmit setup is initiated by holding
RT LOW during a rising RCLK
edge.
REN and WEN must be HIGH before bringing RT LOW. At least
one word, but no more than D - 2 words should have been written into the
FIFO between Reset (Master or Partial) and the time of Retransmit setup.
D = 65,536 for the IDT72V281 and D = 131,072 for the IDT72V291 in IDT
Standard mode.
In FWFT mode, D = 65,537 for the IDT72V281 and
D = 131,073 for the IDT72V291.
If IDT Standard mode is selected, the FIFO will mark the beginning of
the Retransmit setup by setting
EF LOW. The change in level will only be
noticeable if
EF was HIGH before setup. During this period, the internal
read pointer is initialized to the first location of the RAM array.
When
EF goes HIGH, Retransmit setup is complete and read opera-
tions may begin starting with the first location in memory. Since IDT
Standard mode is selected, every word read including the first word
following Retransmit setup requires a LOW on
REN to enable the rising
edge of RCLK. See Figure 11, Retransmit Timing (IDT Standard Mode), for
the relevant timing diagram.
If FWFT mode is selected, the FIFO will mark the beginning of the
Retransmit setup by setting
OR HIGH. During this period, the internal read
pointer is set to the first location of the RAM array.
When
OR goes LOW, Retransmit setup is complete; at the same time,
the contents of the first location appear on the outputs. Since FWFT mode
is selected, the first word appears on the outputs, no LOW on
REN is
necessary. Reading all subsequent words requires a LOW on
REN to
enable the rising edge of RCLK. See Figure 12, Retransmit Timing (FWFT
Mode), for the relevant timing diagram.
For either IDT Standard mode or FWFT mode, updating of the
PAE,
HF and PAF flags begin with the rising edge of RCLK that RT is setup.
PAE is synchronized to RCLK, thus on the second rising edge of RCLK
after
RT is setup, the PAE flag will be updated. HF is asynchronous, thus
the rising edge of RCLK that
RT is setup will update HF. PAF is
synchronized to WCLK, thus the second rising edge of WCLK that occurs
tSKEW after the rising edge of RCLK that
RT is setup will update PAF. RT
is synchronized to RCLK.
相关PDF资料 |
PDF描述 |
|---|---|
| ICL3241CAZ-T | TRANSMITTER/RCVR RS232 28-SSOP |
| V300B36M250BG | CONVERTER MOD DC/DC 36V 250W |
| IDT72V281L15PF | IC FIFO 32768X18 15NS 64QFP |
| MS27474T22F21P | CONN RCPT 21POS JAM NUT W/PINS |
| MAX1030BCTI+ | IC ADC 10BIT 300KSPS 28-TQFN-EP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT72V281L20PF8 | 功能描述:IC FIFO 32768X18 20NS 64QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72V281L20TF | 功能描述:IC FIFO 32768X18 20NS 64QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72V281L20TF8 | 功能描述:IC FIFO 32768X18 20NS 64QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72V283L10PF | 功能描述:IC FIFO 32768X18 10NS 80QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
| IDT72V283L10PF8 | 功能描述:IC FIFO 32768X18 10NS 80QFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:15 系列:74F 功能:异步 存储容量:256（64 x 4） 数据速率:- 访问时间:- 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:24-DIP（0.300"，7.62mm） 供应商设备封装:24-PDIP 包装:管件 其它名称:74F433 |
发布紧急采购，3分钟左右您将得到回复。