- 您现在的位置：买卖IC网 > PDF目录9998 > IDT72V3641L15PFG8 (IDT, Integrated Device Technology Inc)IC SYNCFIFO 1024X36 15NS 120TQFP PDF资料下载
参数资料
| 型号： | IDT72V3641L15PFG8 |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 21/21页 |
| 文件大小： | 0K |
| 描述： | IC SYNCFIFO 1024X36 15NS 120TQFP |
| 标准包装： | 750 |
| 系列： | 72V |
| 功能： | 异步，同步 |
| 存储容量： | 36.8K（1K x 36） |
| 数据速率： | 67MHz |
| 访问时间： | 15ns |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 120-LQFP |
| 供应商设备封装： | 120-TQFP（14x14） |
| 包装： | 带卷 (TR) |
| 其它名称： | 72V3641L15PFG8 |
9
COMMERCIALTEMPERATURERANGE
IDT72V3631/72V3641/72V3651
3.3V CMOS SYNCFIFO 512 x 36, 1,024 x 36 and 2,048 x 36
is complete, the X and Y register values are loaded bitwise through the FS0/
SD input on each LOW-to-HIGH transition of CLKA that the FS1/
SENinputis
LOW. Thereare18-,20-,or22-bitwritesneededtocompletetheprogramming
for the IDT72V3631, IDT72V3641, or IDT72V3651, respectively. The first-bit
write stores the most significant bit of the Y register, and the last-bit write stores
theleastsignificantbitoftheXregister. Eachregistervaluecanbeprogrammed
from 1 to 508 (IDT72V3631), 1 to 1,020 (IDT72V3641), or 1 to 2,044
(IDT72V3651).
When the option to program the Offset registers serially is chosen, the Input
Ready (IR) flag remains LOW until all register bits are written. The IR flag is set
HIGHbytheLOW-to-HIGHtransitionofCLKAafterthelastbitisloadedtoallow
normal FIFO operation. The timing diagram for serial load of offset registers
can be found in Figure 4.
FIFO WRITE/READ OPERATION
Thestateoftheport-Adata(A0-A35)outputsiscontrolledbytheport-AChip
Select (
CSA) and the port-A Write/Read select (W/RA). TheA0-A35outputs
are in the high-impedance state when either
CSA or W/RA is HIGH. The A0-
A35 outputs are active when both
CSA and W/RA are LOW.
Data is loaded into the FIFO from the A0-A35 inputs on a LOW-to-HIGH
transition of CLKA when
CSA and the port-A Mailbox select (MBA) are LOW,
W/
RA, the port-A Enable (ENA), and the Input Ready (IR) flag are HIGH (see
Table 2). Writes to the FIFO are independent of any concurrent FIFO read.
For the Write Cycle Timing diagram, see Figure 5.
The port-B control signals are identical to those of port-A with the exception
thattheport-BWrite/Readselect(
W/RB)istheinverseoftheport-AWrite/Read
select (W/
RA). The state of the port-B data (B0-B35) outputs is controlled by
the port-B Chip Select (
CSB) and the port-B Write/Read select (W/RB). The
B0-B35 outputs are in the high-impedance state when either
CSB is HIGH or
W/RB is LOW. The B0-B35 outputs are active when CSB is LOW and W/RB
is HIGH.
DataisreadfromtheFIFOtoitsoutputregisteronaLOW-to-HIGHtransition
of CLKB when
CSBandtheport-BMailboxselect(MBB)areLOW,W/RB,the
port-B Enable (ENB), and the Output Ready (OR) flag are HIGH (see Table
3). Reads from the FIFO are independent of any concurrent FIFO writes. For
the Read Cycle Timing diagram, see Figure 6.
Thesetup-andhold-timeconstraintstotheportclocksfortheportChipSelects
andWrite/Readselectsareonlyforenablingwriteandreadoperationsandare
notrelatedtohigh-impedancecontrolofthedataoutputs. IfaportEnableisLOW
during a clock cycle, the port Chip Select and Write/Read select may change
states during the setup- and hold time window of the cycle.
WhentheORflagisLOW,thenextdatawordissenttotheFIFOoutputregister
automaticallybytheCLKBLOW-to-HIGHtransitionthatsetstheORflagHIGH.
WhenORisHIGH,anavailabledatawordisclockedtotheFIFOoutputregister
onlywhenaFIFOreadisselectedbytheport-BChipSelect(
CSB),Write/Read
select (
W/RB), Enable (ENB), and Mailbox select (MBB).
SIGNAL DESCRIPTION
RESET
The IDT72V3631/72V3641/72V3651 is reset by taking the Reset (
RST)
input LOW for at least four port-A Clock (CLKA) and four port-B (CLKB) LOW-
to-HIGHtransitions. TheResetinputmayswitchasynchronouslytotheclocks.
AresetinitializesthememoryreadandwritepointersandforcestheInputReady
(IR) flag LOW, the Output Ready (OR) flag LOW, the Almost-Empty (
AE)flag
LOW,andtheAlmost-Full(
AF)flagHIGH. Resettingthedevicealsoforcesthe
Mailbox Flags (
MBF1,MBF2)HIGH. AfteraFIFOisreset,itsInputReadyflag
is set HIGH after at least two clock cycles to begin normal operation. A FIFO
must be reset after power up before data is written to its memory. The relevant
FIFO Reset timing diagram can be found in Figure 2.
FIRST WORD FALL THROUGH MODE (FWFT)
These devices operate in the First Word Fall Through mode (FWFT). This
mode uses the Output Ready function (OR) to indicate whether or not there is
validdataatthedataoutputs(B0-B35).ItalsousestheInputReady(IR)function
to indicate whether or not the FIFO memory has any free space for writing. In
the FWFT mode, the first word written to an empty FIFO goes directly to data
outputs, no read request necessary. Subsequent words must be accessed by
performing a formal read operation.
ALMOST-EMPTYFLAGANDALMOST-FULLFLAGOFFSETPROGRAM-
MING
TworegistersinthesedevicesareusedtoholdtheoffsetvaluesfortheAlmost-
Empty and Almost-Full flags. The Almost-Empty (
AE) flag Offset register is
labeled X, and the Almost-Full (
AF)flagOffsetregisterislabeledY. TheOffset
register can be loaded with a value in three ways: one of two preset values are
loadedintotheOffsetregisters,parallelloadfromportA,orserialload. TheOffset
registerprogrammingmodeischosenbytheflagselect(FS1,FS0)inputsduring
a LOW-to-HIGH transition on the
RST input (See Table 1).
—
PRESET VALUES
If the preset value of 8 or 64 is chosen by the FS1 and FS0 inputs at the time
of a
RST LOW-to-HIGH transition according to Table 1, the preset value is
automatically loaded into the X and Y registers. No other device initialization is
necessarytobeginnormaloperation,andtheIRflagissetHIGHaftertwoLOW-
to-HIGHtransitionsonCLKA.ForthePresetvalueloadingtimingdiagram,see
Figure 2.
—
PARALLEL LOAD FROM PORT A
To program the X and Y registers from port A, the device is reset with FS0
and FS1 LOW during the LOW-to-HIGH transition of
RST. After this reset is
complete, the IR flag is set HIGH after two LOW-to-HIGH transitions on CLKA.
ThefirsttwowritestotheFIFOdonotstoredatainitsmemorybutloadtheOffset
registersintheorderY,X. EachOffsetregisteroftheIDT72V3631,IDT72V3641,
and IDT72V3651 uses port-A inputs (A8-A0), (A9-A0), and (A10-A0),
respectively. Thehighestnumberinputisusedasthemostsignificantbitofthe
binary number in each case. Each register value can be programmed from 1
to508(IDT72V3631),1to1,020(IDT72V3641),and1to2,044(IDT72V3651).
AfterbothOffsetregistersareprogrammedfromportA,subsequentFIFOwrites
store data in the RAM. The timing diagram for parallel load of offset registers
can be found in Figure 3.
—
SERIAL LOAD
To program the X and Y registers serially, the device is reset with FS0/SD
andFS1/
SENHIGHduringtheLOW-to-HIGHtransitionofRST. Afterthisreset
NOTE:
1. X register holds the offset for
AE; Y register holds the offset for AF.
FS1
FS0
RST
X and Y Registers (1)
HH
↑
Serial Load
HL
↑
64
LH
↑
8
LL
↑
Parallel Load From Port A
TABLE 1 —
—
— FLAG PROGRAMMING
相关PDF资料 |
PDF描述 |
|---|---|
| IDT72V3641L15PF8 | IC SYNCFIFO 1024X36 15NS 120TQFP |
| VI-B61-IV-F2 | CONVERTER MOD DC/DC 12V 150W |
| VE-BNX-MY | CONVERTER MOD DC/DC 5.2V 50W |
| VI-B4Z-IV-B1 | CONVERTER MOD DC/DC 2V 60W |
| IDT723622L15PF8 | IC FIFO SYNC 256X36X2 120QFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT72V3641L15PQF | 功能描述:IC SYNCFIFO 1024X36 15NS 132PQFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT72V3641L20PF | 功能描述:IC SYNCFIFO 1024X36 20NS 120TQFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT72V3641L20PF8 | 功能描述:IC SYNCFIFO 1024X36 20NS 120TQFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT72V3641L20PQF | 功能描述:IC SYNCFIFO 1024X36 20NS 132PQFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
| IDT72V3642L10PF | 功能描述:IC FIFO SYNC 3.3V CMOS 120-TQFP RoHS:否 类别:集成电路 (IC) >> 逻辑 - FIFO 系列:72V 标准包装:90 系列:7200 功能:同步 存储容量:288K（16K x 18） 数据速率:100MHz 访问时间:10ns 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:64-LQFP 供应商设备封装:64-TQFP（14x14） 包装:托盘 其它名称:72271LA10PF |
发布紧急采购，3分钟左右您将得到回复。