- 您现在的位置：买卖IC网 > PDF目录4580 > IDT72V51446L7-5BBI (IDT, Integrated Device Technology Inc)IC FLOW CTRL MULTI QUEUE 256-BGA PDF资料下载
参数资料
| 型号： | IDT72V51446L7-5BBI |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 2/57页 |
| 文件大小： | 0K |
| 描述： | IC FLOW CTRL MULTI QUEUE 256-BGA |
| 标准包装： | 1 |
| 类型： | 多队列流量控制 |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 256-BBGA |
| 供应商设备封装： | 256-BGA（17x17） |
| 包装： | 托盘 |
| 其它名称： | 72V51446L7-5BBI |
第1页当前第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页
10
COMMERCIALANDINDUSTRIAL
TEMPERATURERANGES
IDT72V51436/72V51446/72V51456 3.3V, MULTI-QUEUE FLOW-CONTROL DEVICES
(16 QUEUES) 36 BIT WIDE CONFIGURATION 589,824, 1,179,648 and 2,359,296 bits
PIN DESCRIPTIONS (CONTINUED)
Symbol
Name
I/O TYPE
Description
Q[35:0]
Data Output Bus
LVTTL
These are the 36 data output pins. Data is read out of the device via these output pins on the rising edge
Qout
OUTPUT
of RCLK provided that
REN is LOW, OE is LOW and the queue is selected. Note, that in Packet mode
Q32-Q35 may be used as packet markers, please see packet ready functional discussion for more
detail. Due to bus matching not all outputs may be used, any unused outputs should not be connected.
RADEN
Read Address Enable
LVTTL
The RADEN input is used in conjunction with RCLK and the RDADD address bus to select a queue to
INPUT
be read from. A queue addressed via the RDADD bus is selected on the rising edge of RCLK provided
that RADEN is HIGH. RADEN should be asserted (HIGH) only during a queue change cycle(s). RADEN
should not be permanently tied HIGH. RADEN cannot be HIGH for the same RCLK cycle as ESTR. Note,
that a read queue selection cannot be made, (RADEN must NOT go active) until programming of the part
has been completed and
SENO has gone LOW.
RCLK
Read Clock
LVTTL
When enabled by
REN, the rising edge of RCLK reads data from the selected queue via the output bus
INPUT
Qout. The queue to be read is selected via the RDADD address bus and a rising edge of RCLK while
RADEN is HIGH. A rising edge of RCLK in conjunction with ESTR and RDADD will also select the
PAEn/
PRnflagsectortobeplacedonthePAEn/PRnbusduringdirectflagoperation.Duringpolledflagoperation
the
PAEn/PRnbusiscycledwithrespecttoRCLKandtheESYNCsignalissynchronizedtoRCLK.The
PAE,PRandOVoutputsareallsynchronizedtoRCLK.DuringdeviceexpansiontheEXOandEXIsignals
are based on RCLK. RCLK must be continuous and free-running.
RDADD
Read Address Bus
LVTTL
For the 16Q device the RDADD bus is 8 bits. The RDADD bus is a dual purpose address bus. The first
[7:0]
INPUT
functionofRDADDistoselectaqueuetobereadfrom.Theleastsignificant4bitsofthebus,RDADD[3:0]
areusedtoaddress1of16possiblequeueswithinamulti-queuedevice.AddresspinRDADD[4]provides
the user with a Null-Q address. If the user does not wish to address one of the 16 queues, a Null-Q can
be addressed using this pin. The Null-Q operation is discussed in more detail later. The most significant
3 bits, RDADD[7:5] are used to select 1 of 8 possible multi-queue devices that may be connected in
expansion mode. These 3 MSb’s will address a device with the matching ID code. The address present
on the RDADD bus will be selected on a rising edge of RCLK provided that RADEN is HIGH, (note, that
data can be placed on to the Qout bus, read from the previously selected queue on this RCLK edge). On
the next rising RCLK edge after a read queue select, a data word from the previous queue will be placed
ontotheoutputs,Qout,regardlessofthe
RENinput.TwoRCLKrisingedgesafterreadqueueselect,data
will be placed on to the Qout outputs from the newly selected queue, regardless of
REN due to the first
word fall through effect.
The second function of the RDADD bus is to select the sector of queues to be loaded on to the
PAEn/PRn
bus during strobed flag mode. The least significant bit, RDADD[0] is used to select the sector of a device
to be placed on the
PAEn bus. The most significant 3 bits, RDADD[7:5] are again used to select 1 of 8
possible multi-queue devices that may be connected in expansion mode. Address bits RDADD[4:1] are
don’t care during sector selection. The sector address present on the RDADD bus will be selected on the
rising edge of RCLK provided that ESTR is HIGH, (note, that data can be placed on to the Qout bus, read
fromthepreviouslyselectedqueueonthisRCLKedge).PleaserefertoTable2fordetailsonRDADDbus.
REN
Read Enable
LVTTL
The
REN input enables read operations from a selected queue based on a rising edge of RCLK. A
INPUT
queue to be read from can be selected via RCLK, RADEN and the RDADD address bus regardless
ofthestateof
REN.DatafromanewlyselectedqueuewillbeavailableontheQoutoutputbusonthesecond
RCLK cycle after queue selection regardless of
REN due to the FWFT operation. A read enable is not
required to cycle the
PAEn/PRn bus (in polled mode) or to select the PAEn sector , (in direct mode).
SCLK
Serial Clock
LVTTL
If serial programming of the multi-queue device has been selected during master reset, the SCLK input
INPUT
clocks the serial data through the multi-queue device. Data setup on the SI input is loaded into the device
ontherisingedgeofSCLKprovidedthat
SENIisenabled,LOW.Whenexpansionofdevicesisperformed
the SCLK of all devices should be connected to the same source.
SENI
Serial Input Enable
LVTTL
During serial programming of a multi-queue device, data loaded onto the SI input will be clocked into the
INPUT
part (via a rising edge of SCLK), provided the
SENI input of that device is LOW. If multiple devices are
cascaded,the
SENIinputshouldbeconnectedtotheSENOoutputofthepreviousdevice.Sowhenserial
loading of a given device is complete, its
SENO output goes LOW, allowing the next device in the chain
to be programmed (
SENOwillfollowSENIofagivendeviceoncethatdeviceisprogrammed).TheSENI
input of the master device (or single device), should be controlled by the user.
相关PDF资料 |
PDF描述 |
|---|---|
| LFEC15E-4F484C | IC FPGA 10.2KLUTS 288I/O 484-BGA |
| LT3022IMSE-1.8#TRPBF | IC REG LDO 1.8V 1A 16-MSOP |
| LT3022IMSE-1.5#TRPBF | IC REG LDO 1.5V 1A 16-MSOP |
| LT3022IMSE-1.2#TRPBF | IC REG LDO 1.2V 1A 16-MSOP |
| IDT72V51446L6BB | IC FLOW CTRL MULTI QUEUE 256-BGA |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT72V51453L6BB | 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| IDT72V51453L6BB8 | 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| IDT72V51453L7-5BB | 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| IDT72V51453L7-5BB8 | 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| IDT72V51453L7-5BBI | 功能描述:IC FLOW CTRL MULTI QUEUE 256-BGA RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
发布紧急采购，3分钟左右您将得到回复。