- 您现在的位置：买卖IC网 > PDF目录9974 > IDT82V2084PF8 (IDT, Integrated Device Technology Inc)IC LIU T1/J1/E1 4CH 128-TQFP PDF资料下载
参数资料
| 型号： | IDT82V2084PF8 |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 21/75页 |
| 文件大小： | 0K |
| 描述： | IC LIU T1/J1/E1 4CH 128-TQFP |
| 标准包装： | 1,000 |
| 类型： | 线路接口装置（LIU） |
| 规程： | E1 |
| 电源电压： | 3.13 V ~ 3.47 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 128-LQFP |
| 供应商设备封装： | 128-TQFP（14x20） |
| 包装： | 带卷 (TR) |
| 其它名称： | 82V2084PF8 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页当前第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页
28
INDUSTRIAL
TEMPERATURE RANGES
QUAD CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
3.7.4
INBAND LOOPBACK
When PATT[1:0] bits (MAINT0, 0AH...) are set to ‘11’, the correspond-
ing channel is configured in Inband Loopback mode. In this mode, an
unframed activate/Deactivate Loopback Code is generated repeatedly in
transmit direction per ANSI T1. 403 which overwrite the transmit signals.
In receive direction, the framed or unframed code is detected per ANSI T1.
403, even in the presence of 10-2 bit error rate.
If the Automatic Remote Loopback is enabled by setting ARLP bit
(MAINT1, 0BH...) to ‘1’, the chip will establish/demolish the Remote Loop-
back based on the reception of the Activate Loopback Code/Deactivate
Loopback Code for 5.1 s. If the ARLP bit (MAINT1, 0BH...) is set to ‘0’, the
Remote Loopback can also be demolished forcedly.
3.7.4.1 Transmit Activate/Deactivate Loopback Code
The pattern of the transmit Activate/Deactivate Loopback Code is
defined by the TIBLB[7:0] bits (MAINT3, 0DH...). Whether the code repre-
sentsanActivateLoopbackCodeoraDeactivateLoopbackCodeisjudged
by the far end receiver. The length of the pattern ranges from 5 bits to 8 bits,
as selected by the TIBLB_L[1:0] bits (MAINT2, 0CH...). The pattern can be
programmed to 6-bit-long or 8-bit-long respectively by repeating itself if it
is 3-bit-long or 4-bit-long. When the PATT[1:0] bits (MAINT0, 0AH...) are
set to ‘11’, the transmission of the Activate/Deactivate Loopback Code is
initiated. If the PATT_CLK bit (MAINT0, 0AH...) is set to ‘0’ and the
PATT[1:0]bits(MAINT0,0AH...)areset to‘00’,thetransmissionofthe Acti-
vate/Deactivate Loopback Code will stop.
The local transmit activate/deactivate code setting should be the same
as the receive code setting in the remote end. It is the same thing for the
other way round.
3.7.4.2 Receive Activate/Deactivate Loopback Code
The pattern of the receive Activate Loopback Code is defined by the
RIBLBA[7:0] bits (MAINT4, 0EH...). The length of this pattern ranges from
5 bits to 8 bits, as selected by the RIBLBA_L [1:0] bits (MAINT2, 0CH...).
The pattern can be programmed to 6-bit-long or 8-bit-long respectively by
repeating itself if it is 3-bit-long or 4-bit-long.
The pattern of the receive Deactivate Loopback Code is defined by the
RIBLBD[7:0] bits (MAINT5, 0FH...). The length of the receive Deactivate
Loopback Code ranges from 5 bits to 8 bits, as selected by the
RIBLBD_L[1:0] bits (MAINT2, 0CH...). The pattern can be programmed to
6-bit-long or 8-bit-long respectively by repeating itself if it is 3-bit-long or 4-
bit-long.
After the Activate Loopback Code has been detected in the receive data
for more than 30 ms (in E1 mode) / 40 ms (in T1/J1 mode), the IBLBA_S
bit (STAT0, 14H...) will be set to ‘1’ to declare the reception of the Activate
Loopback Code.
After the Deactivate Loopback Code has been detected in the receive
dataformorethan30ms(InE1mode)/40ms(InT1/J1mode),theIBLBD_S
bit(STAT0,14H...)willbesetto‘1’todeclarethereceptionoftheDeactivate
Loopback Code.
When the IBLBA_IES bit (INTES, 13H...) is set to ‘0’, only the ‘0’ to ‘1’
transitionof theIBLBA_S bitwillgeneratean interruptandset theIBLBA_IS
bit (INTS0, 16H...) to ‘1’. When the IBLBA_IES bit is set to ‘1’, any changes
of the IBLBA_S bit will generate an interrupt and set the IBLBA_IS bit
(INTS0, 16H...) to ‘1’. The IBLBA_IS bit will be reset to ‘0’ after being read.
When the IBLBD_IES bit (INTES, 13H...) is set to ‘0’, only the ‘0’ to ‘1’
transitionoftheIBLBD_SbitwillgenerateaninterruptandsettheIBLBD_IS
bit (INTS0, 16H...) to ‘1’. When the IBLBD_IES bit is set to ‘1’, any changes
of the IBLBD_S bit will generate an interrupt and set the IBLBD_IS bit
(INTS0, 16H...) to ‘1’. The IBLBD_IS bit will be reset to ‘0’ after being read.
3.7.4.3 Automatic Remote Loopback
When ARLP bit (MAINT1, 0BH...) is set to ‘1’, the corresponding chan-
nel is configured into the Automatic Remote Loopback mode. In this mode,
if the Activate Loopback Code has been detected in the receive data for
more than 5.1 s, the Remote Loopback (shown as Figure-16) will be estab-
lished automatically, and the RLP_S bit (STAT1, 15H...) will be set to ‘1’ to
indicate the establishment of the Remote Loopback. The IBLBA_S bit
(STAT0,14H...)issetto‘1’togenerateaninterrupt.Inthiscase,theRemote
Loopback mode will still be kept even if the receiver stop receiving the Acti-
vate Loopback Code.
If the Deactivate Loopback Code has been detected in the receive data
formorethan5.1s,theRemoteLoopbackwillbedemolishedautomatically,
and the RLP_S bit (STAT1, 15H...) will set to ‘0’ to indicate the demolish-
ment of the Remote Loopback. The IBLBD_S bit (STAT0, 14H...) is set to
‘1’ to generate an interrupt.
The Remote Loopback can also be demolished forcedly by setting
ARLP bit (MAINT1, 0BH...) to ‘0’.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-21L-MX-F4 | CONVERTER MOD DC/DC 28V 75W |
| IDT72V841L15PFI | IC FIFO SYNC 2048X18 15NS 64QFP |
| MS3106R20-11P | CONN PLUG 13POS STRAIGHT W/PINS |
| IDT72V3650L7-5PF | IC FIFO SS 2048X36 7-5NS 128TQFP |
| MS27466T17B99SA | CONN RCPT 23POS WALL MT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT82V2084PFG | 功能描述:IC LIU T1/J1/E1 4CH 128-TQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| IDT82V2084PFG8 | 功能描述:IC LINE INTERFC UNIT 4CH 128TQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
| IDT82V2088 | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:OCTAL CHANNEL T1/E1/J1 LONG HAUL/ SHORT HAUL LINE INTERFACE UNIT |
| IDT82V2088_08 | 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:OCTAL CHANNEL T1/E1/J1 LONG HAUL/ SHORT HAUL LINE INTERFACE UNIT |
| IDT82V2088BB | 功能描述:IC LIU T1/J1/E1 8CH 208-BGA RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP（0.173"，4.40mm 宽） 供应商设备封装:16-TSSOP 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。