- 您现在的位置：买卖IC网 > PDF目录175852 > IP4337CX18 (NXP Semiconductors N.V.) 7-channel integrated filter network with ESD input protection to IEC 61000-4-2 level 4 PDF资料下载
参数资料
| 型号： | IP4337CX18 |
| 厂商： | NXP Semiconductors N.V. |
| 元件分类： | 电路保护 |
| 英文描述： | 7-channel integrated filter network with ESD input protection to IEC 61000-4-2 level 4 |
| 封装： | IP4337CX18/LF/P<NAX000|<<<1<Always Pb-free,;IP4337CX18/LF<NAX000|<<<1<Always Pb-free,; |
| 文件页数： | 2/12页 |
| 文件大小： | 70K |
| 代理商： | IP4337CX18 |
IP4337CX18LF_2
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 02 — 20 August 2009
10 of 12
NXP Semiconductors
IP4337CX18/LF
7-channel integrated lter network with ESD input protection
Device removal can be done when the substrate is heated until it is certain that all solder
joints are molten. The chip can then be carefully removed from the substrate without
damaging the tracks and solder lands on the substrate. Removing the device must be
done using plastic tweezers, because metal tweezers can damage the silicon. The
surface of the substrate should be carefully cleaned and all solder and ux residues
and/or underll removed. When a new chip is placed on the substrate, use the ux
process instead of solder on the solder lands. Apply ux on the bumps at the chip side as
well as on the solder pads on the substrate. Place and align the new chip while viewing
with a microscope. To reow the solder, use the solder prole shown in application note
AN10365 “Surface mount reow soldering description”.
9.3.4 Cleaning
Cleaning can be done after reow soldering.
10. Abbreviations
11. Revision history
Table 7.
Abbreviations
Acronym
Description
DUT
Device Under Test
ESD
ElectroStatic Discharge
LAN
Local Area Network
NWA
NetWork Analyzer
PCB
Printed-Circuit Board
PCS
Personal Communication System
RoHS
Restriction of Hazardous Substances
WAN
Wide Area Network
WLCSP
Wafer-Level Chip-Scale Package
Table 8.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
IP4337CX18LF_2
20090820
Product data sheet
-
IP4337CX18LF_1
Modications:
Figure 4: gure title and symbol changed
IP4337CX18LF_1
20090618
Product data sheet
-
相关PDF资料 |
PDF描述 |
|---|---|
| IP4338CX24 | 10-channel integrated filter network with ESD input protection to IEC 61000-4-2 level 4 |
| IP5-04-05.0-L-S-1-TR | INTERCONNECTION DEVICE |
| IPD1-117-01-L-D-02-20-P | INTERCONNECTION DEVICE |
| IPD1-118-01-F-D-02-20-P | INTERCONNECTION DEVICE |
| IPD1-113-01-S-D-02-30-P | INTERCONNECTION DEVICE |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IP4337CX18/LF | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:7-channel integrated filter network with ESD input protection to IEC 61000-4-2 level 4 |
| IP4337CX18/LF,135 | 功能描述:ESD 抑制器 7CH 70ohm 40MHz EMI filter,ESD PROTECTIN RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| IP4337CX18/LF/P,13 | 功能描述:ESD 抑制器 7CH INTEG FLT w/ESD Input Protection RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| IP4337CX18/LF/P+135 | 制造商:NXP Semiconductors 功能描述:Cut Tape 制造商:NXP Semiconductors 功能描述:0 |
| IP4338CX24 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:10-channel integrated filter network with ESD input protection to IEC 61000-4-2 level 4 |
发布紧急采购，3分钟左右您将得到回复。