- 您现在的位置：买卖IC网 > PDF目录378635 > IP4350CX24 (NXP SEMICONDUCTORS) 9-channel SD memory card interface ESD protection filter to IEC 61000-4-2 level 4 PDF资料下载
参数资料
| 型号： | IP4350CX24 |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 消费家电 |
| 英文描述： | 9-channel SD memory card interface ESD protection filter to IEC 61000-4-2 level 4 |
| 中文描述： | SPECIALTY CONSUMER CIRCUIT, PBGA8 |
| 封装： | 1.95 X 2.11 MM, 0.61 MM HEIGHT, LEAD FREE, WLCSP-24 |
| 文件页数： | 14/16页 |
| 文件大小： | 110K |
| 代理商： | IP4350CX24 |
IP4350CX24_1
NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 01 — 5 February 2010
14 of 16
NXP Semiconductors
IP4350CX24
9-channel SD memory card interface ESD protection filter
13. Legal information
13.1
Data sheet status
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL
http://www.nxp.com
.
13.2
Definitions
Draft —
The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet —
A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification —
The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3
Disclaimers
Limited warranty and liability —
Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation -
lost profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial saleof NXP Semiconductors.
Right to make changes —
NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use —
NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications —
Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on a weakness or default in the
customer application/use or the application/use of customer’s third party
customer(s) (hereinafter both referred to as “Application”). It is customer’s
sole responsibility to check whether the NXP Semiconductors product is
suitable and fit for the Application planned. Customer has to do all necessary
testing for the Application in order to avoid a default of the Application and the
product. NXP Semiconductors does not accept any liability in this respect.
Limiting values —
Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale —
NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at
http://www.nxp.com/profile/terms
, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
No offer to sell or license —
Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Export control —
This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
Non-automotive qualified products —
Unless the data sheet of an NXP
Semiconductors product expressly states that the product is automotive
qualified, the product is not suitable for automotive use. It is neither qualified
nor tested in accordance with automotive testing or application requirements.
NXP Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
Document status
[1][2]
Product status
[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
相关PDF资料 |
PDF描述 |
|---|---|
| IP4352CX24 | 9-channel SD-memory card interface filter with ESD protection to IEC 61000-4-2 level 4 |
| IP4365CX11 | Integrated (U)SIM card passive filter array and USB full speed ESD protection to IEC 61000-4-2 level 4 |
| IP4769CZ14 | VGA interface ESD protection with integrated termination resistors |
| IP4770CZ16 | VGA-video interface with integrated buffers, ESD protection and integrated termination resistors |
| IP4771CZ16 | VGA-video interface with integrated buffers, ESD protection and integrated termination resistors |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IP4350CX24/LF,135 | 功能描述:ESD 抑制器 SD-Card, MMC T-flash Interface RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| IP4352CX24 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:9-channel SD memory card interface filter with ESD protection to IEC 61000-4-2 level 4 |
| IP4352CX24/LF | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:9-channel SD memory card interface filter with ESD protection to IEC 61000-4-2 level 4 |
| IP4352CX24/LF,135 | 功能描述:ESD 抑制器 9CH SD MEMORY CARD RoHS:否 制造商:STMicroelectronics 通道:8 Channels 击穿电压:8 V 电容:45 pF 端接类型:SMD/SMT 封装 / 箱体:uQFN-16 功率耗散 Pd: 工作温度范围:- 40 C to + 85 C |
| IP4353CX15/LF | 制造商:NXP Semiconductors 功能描述:Cut Tape |
发布紧急采购，3分钟左右您将得到回复。