- 您现在的位置：买卖IC网 > PDF目录1809 > IR3629AMTRPBF (International Rectifier)IC CTLR PWM SYNC BUCK 12-MLPD PDF资料下载
参数资料
| 型号： | IR3629AMTRPBF |
| 厂商： | International Rectifier |
| 文件页数： | 12/23页 |
| 文件大小： | 0K |
| 描述： | IC CTLR PWM SYNC BUCK 12-MLPD |
| 产品变化通告： | (EP) Parts Discontinuation 25/May/2012 |
| 标准包装： | 1 |
| 应用： | 控制器，DDR |
| 输入电压： | 4.5 V ~ 14 V |
| 输出数： | 1 |
| 输出电压： | 可调至 0.6V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-VFDFN 裸露焊盘 |
| 供应商设备封装： | 12-MLPD |
| 包装： | 标准包装 |
| 产品目录页面： | 1383 (CN2011-ZH PDF) |
| 其它名称： | IR3629AMTRPBFDKR |
IR3629/IR3629A MPbF
Input Capacitor Selection
The ripple current generated during the on time
of upper the MOSFET should be provided by the
input capacitor. The RMS value of this ripple is
expressed by:
If Δ i ≈ 40 %( I o ) , then the output inductor will be:
L ≈ 0.6uH
The MPL104-0R6 from Delta provides a
compact, low profile inductor suitable for this
application.
I RMS = I o ? D ? ( 1 ? D )
--( 7 )
Where: D = V
V o
in
D is the Duty Cycle
I RMS is the RMS value of the input capacitor
current.
Io is the output current.
For Io=25A and D=0.15, the I RMS =8.9A.
Ceramic capacitors are recommended due to
their peak current capabilities, they also feature
low ESR and ESL at higher frequency which
Output Capacitor Selection
The voltage ripple and transient requirements
determine the output capacitors type and values.
The criteria is normally based on the value of the
Effective Series Resistance (ESR). However the
actual capacitance value and the Equivalent
Series Inductance (ESL) are other contributing
components. These components can be
described as:
Δ V o = Δ V o ( ESR ) + Δ V o ( ESL ) + Δ V o ( C )
Δ V o ( ESL ) = ?
? V in ?
enables better efficiency. However, for the large
pulsing input current at full load, 2x270uF 16V
OS-CON capacitors from Sanyo are
recommended, as well as 2x10uF 16V ceramic
capacitors from Murata.
Δ V o ( ESR ) = Δ I L * ESR
? * ESL
? L ?
- -(9)
Inductor Selection
The inductor is selected based on output power,
operating frequency and efficiency requirements.
Δ V o ( C ) =
Δ I L
8 * C o * F s
; Δ t = D ?
V in ? V o = L ?
A low inductor value causes large ripple current,
resulting in the smaller size, faster response to a
load transient but poor efficiency and high output
noise. Generally, the selection of the inductor
value can be reduced to the desired maximum
ripple current in the inductor ( Δ i ) . The optimum
point is usually found between 20% and 50%
ripple of the output current.
For the buck converter, the inductor value for the
desired operating ripple current can be
determined using the following relation:
s
Δ i 1
Δ t F
Δ V o = Output voltage ripple
Δ I L = Inductor ripple current
Since the output capacitor has a major role in the
overall performance of the converter and
determines the result of transient response,
selection of the capacitor is critical. The IR3629A
can perform well with all types of capacitor.
As a rule, the capacitor must have low enough
ESR to meet output ripple and load transient
requirements.
The goal for this design is to meet the voltage
Where:
L = ( V in ? V o ) ?
V o
V in ? Δ i * F s
--( 8 )
ripple requirement in the smallest possible
capacitor size. Therefore a SP capacitor is
selected due to large capacitance and small size.
Two of the Panasonic SP-CAP EEFSX0D331XE
V in = Maximum input voltage
V o = Output Voltage
Δ i = Inductor ripple current
F s = Switching frequency
Δ t = Turn on time
D = Duty cycle
11/29/2007
(330uF, 2V, 6mOhm) is a good choice. In this
case, the ESR dominates the output voltage
ripple, equation (9) can be used to calculate the
required ESR for the specific voltage ripple.
12
相关PDF资料 |
PDF描述 |
|---|---|
| IR3637ASTRPBF | IC REG CTRLR BUCK PWM VM 8-SOIC |
| IR3637STRPBF | IC REG CTRLR BUCK PWM VM 8-SOIC |
| IR3638STRPBF | IC REG CTRLR BUCK PWM VM 14-SOIC |
| IR3640MPBF | IC REG CTRLR BUCK PWM VM 20-MLPQ |
| IR3651STRPBF | IC REG CTRLR BUCK PWM VM 14-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IR3629MPBF | 功能描述:IC CTLR PWM BUCK SYNC 12-MLPD RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,000 系列:- 应用:电源，ICERA E400，E450 输入电压:4.1 V ~ 5.5 V 输出数:10 输出电压:可编程 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:42-WFBGA，WLCSP 供应商设备封装:42-WLP 包装:带卷 (TR) |
| IR3629MTRPBF | 功能描述:电压模式 PWM 控制器 HI FREQ SYNC PWM 600kHz 5 or 12V 0.6 RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel |
| IR3637ASPBF | 功能描述:IC REG CTRLR BUCK PWM VM 8-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,000 系列:- PWM 型:电压模式 输出数:1 频率 - 最大:1.5MHz 占空比:66.7% 电源电压:4.75 V ~ 5.25 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 85°C 封装/外壳:40-VFQFN 裸露焊盘 包装:带卷 (TR) |
| IR3637ASTRPBF | 功能描述:开关变换器、稳压器与控制器 High Volt Sych PWM 600kHz 5V PWM RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel |
| IR3637SPBF | 功能描述:IC REG CTRLR BUCK PWM VM 8-SOIC RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 切换控制器 系列:- 标准包装:4,000 系列:- PWM 型:电压模式 输出数:1 频率 - 最大:1.5MHz 占空比:66.7% 电源电压:4.75 V ~ 5.25 V 降压:是 升压:无 回扫:无 反相:无 倍增器:无 除法器:无 Cuk:无 隔离:无 工作温度:-40°C ~ 85°C 封装/外壳:40-VFQFN 裸露焊盘 包装:带卷 (TR) |
发布紧急采购，3分钟左右您将得到回复。