参数资料
| 型号： | IRPLLNR4 |
| 厂商： | International Rectifier |
| 文件页数： | 18/20页 |
| 文件大小： | 0K |
| 描述： | BALLAST UNIV INP FLUOR IR2166 |
| 标准包装： | 1 |
| 其它名称： | *IRPLLNR4 |
The value of REOL4 is changed so that the lamp voltage during normal running produces a signal
with 1.5 Vppk at the point (A) were the capacitor CEOL connects it to the SD pin. For a T5/35W
lamp 1.2Kohm at REOL4 provides the correct voltage.
The SD pin is internally biased at 2V with 1Mohm impedance and therefore at the SD pin a signal
varying between 1.25V and 2.75V will normally be present due to the AC coupling of the 100nF
capacitor (CEOL).
During end of life the lamp voltage may increase either symmetrically (AC end of life, due to a
similar deterioration in both cathode) or asymmetrically (DC end of life, due to a deterioration only
in one cathode). This circuit has the advantage of detecting both failure modes.
The peak to peak voltage at the SD pin will increase (with 2V DC offset) in either case until the
positive peak exceeds 3V and/or the negative peak drops below 1V, therefore triggering the window
comparator shutdown. The threshold of end of life can be adjusted by changing the value of REOL4
(usually 30% Vlamp is required).
Figure 12 shows the voltage in the SD pin and the voltage on the lamp in these 4 cases: no end of
life, DC end of life (upper cathode deteriorated and lower cathode deteriorated) and AC end of life
(both filaments deteriorated in the same way).
SD pin Voltage
3V
2V
1V
3V
2V
1V
3V
2V
1V
3V
2V
1V
Lamp Voltage
Vspec
0V
Vspec + 30%
0V
0V
Vspec + 30%
0V
-Vspec - 30%
-Vspec - 30%
Vspec = VpK in the spec of the lamp
Figure 12: Voltage in the SD pin and voltage on the lamp
in these 4 cases: no end of life, DC end of life and AC end of life.
www.irf.com
RD-0602
18
相关PDF资料 |
PDF描述 |
|---|---|
| IRPLLNR5 | KIT BALLAST UNIV FLUOR 54W TL5 |
| IRPLLNR7 | KIT UNIV ELEC BALLAST FLUOR LAMP |
| IRPLMB1E | KIT DESIGN BALLAST 220VAC |
| IS-418-TR1509-12 | POWER SUPPLY 240VAC FOR DEV KIT |
| IS-DEM KIT-2 | SMARTDISPLAY DEMONSTRATION KIT 2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IRPLLNR5 | 功能描述:电源管理IC开发工具 Uni Inpt Lin Fluor Ballast 54W TL5 Lamp RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLLNR7 | 功能描述:电源管理IC开发工具 Flourescent Ballast Using IRS2166DPBF RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLMB1E | 功能描述:KIT DESIGN BALLAST 220VAC RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 类型:MCU 适用于相关产品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、缆线、软件、数据表和用户手册 其它名称:520-1035 |
| IR-POST-B | 制造商:Knoll Systems 功能描述:Single Target IR Repeater Kit with Black Postage Stamp Receiver 制造商:KNOLL SYSTEMS 功能描述:IR REPEATER COMPLETE KIT BLACK POSTAGE STAMP RECEIVER |
| IRPP3624-05A | 制造商:International Rectifier 功能描述:5 AMP SINGLE PHASE SYNCHRONOUS BUCK POWER+ CHIPSET REFERENCE - Bulk 制造商:International Rectifier 功能描述:DEMO BOARD KIT FOR 3624SPBF 5A 制造商:IR 功能描述:Single Phase 5 A Synchronous Buck Reference Design |
发布紧急采购，3分钟左右您将得到回复。