参数资料
| 型号： | IRPLLNR4 |
| 厂商： | International Rectifier |
| 文件页数： | 20/20页 |
| 文件大小： | 0K |
| 描述： | BALLAST UNIV INP FLUOR IR2166 |
| 标准包装： | 1 |
| 其它名称： | *IRPLLNR4 |
Design Procedure to adapt the design to different lamp types
To adapt the design to different types of lamps you need to adjust the values of: LPFC, MPFC, MLO,
MHO, CPH, RT, RPH, RCS, CT, REOL4, CRES and LRES. Do not change any others values!
1) Use the Ballast Designer Software to set the values of LRES, CRES, LPFC, MPFC, MLO and
MHO, CT, and to set the starting values of CPH, RT, RPH, RCS and LPFC.
Cross both lamps (i.e. connect a filament or resistor to each lamp cathode position but not a good
lamp) and measure the lamp voltage at ignition using a storage oscilloscope.
1) Set RCS to get the right maximum ignition voltage (decrease RCS to increase the ignition voltage)
Cross both lamps (i.e. connect a filament or resistor to each lamp cathode position but not a
good lamp) and measure the lamp voltage at ignition using a storage oscilloscope.
Connect both lamps correctly and measure the input power
2) Set RT to set the power on the lamp (increase RT to decrease the frequency and increase
the power on the lamp)
3) Set RPH to set the right preheat frequency (increase RPH to decrease the preheat fre-
quency and increase the preheat current)
In the case of voltage mode heating, increase CH1 and CH2 to increase the preheat voltage (use 6-7
turns in the secondary of LRES).
4) Select CPH to set the preheat time (increase CPH to increase the preheat time)
5) Verify the value of LPFC at each limit of the line/load range:
maximum input voltage: If the COMP pin becomes less than 400mV the PFC will not operate
in a stable manner and it is necessary to increase LPFC.
minimum input voltage : If the PFC does not operate in a stable manner and audible noise can
be heard from LPFC, it is necessary to decrease LPFC.
6) Set ROL4 to set the End of life protection to a percentage of the lamp voltage. For example, to
set the protection threshold to 30% of the lamp voltage:
The value of REOL4 is chosen to have the SD pin varying between 2-0.7V and 2+0.7 during
normal operations and exceeding the window comparator limits (less than 1V or more than 3V)
with 30% change in the voltage of the lamp.
(Fine tuning of this threshold can be done by trying different REOL4 values on the test bench)
Data and specifications subject to change without notice.
3/30/2006
www.irf.com
RD-0602
20
相关PDF资料 |
PDF描述 |
|---|---|
| IRPLLNR5 | KIT BALLAST UNIV FLUOR 54W TL5 |
| IRPLLNR7 | KIT UNIV ELEC BALLAST FLUOR LAMP |
| IRPLMB1E | KIT DESIGN BALLAST 220VAC |
| IS-418-TR1509-12 | POWER SUPPLY 240VAC FOR DEV KIT |
| IS-DEM KIT-2 | SMARTDISPLAY DEMONSTRATION KIT 2 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IRPLLNR5 | 功能描述:电源管理IC开发工具 Uni Inpt Lin Fluor Ballast 54W TL5 Lamp RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLLNR7 | 功能描述:电源管理IC开发工具 Flourescent Ballast Using IRS2166DPBF RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| IRPLMB1E | 功能描述:KIT DESIGN BALLAST 220VAC RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 类型:MCU 适用于相关产品:Freescale MC68HC908LJ/LK（80-QFP ZIF 插口） 所含物品:面板、缆线、软件、数据表和用户手册 其它名称:520-1035 |
| IR-POST-B | 制造商:Knoll Systems 功能描述:Single Target IR Repeater Kit with Black Postage Stamp Receiver 制造商:KNOLL SYSTEMS 功能描述:IR REPEATER COMPLETE KIT BLACK POSTAGE STAMP RECEIVER |
| IRPP3624-05A | 制造商:International Rectifier 功能描述:5 AMP SINGLE PHASE SYNCHRONOUS BUCK POWER+ CHIPSET REFERENCE - Bulk 制造商:International Rectifier 功能描述:DEMO BOARD KIT FOR 3624SPBF 5A 制造商:IR 功能描述:Single Phase 5 A Synchronous Buck Reference Design |
发布紧急采购，3分钟左右您将得到回复。