参数资料
型号: IS80C52-24PL
厂商: INTEGRATED SILICON SOLUTION INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQCC44
封装: PLASTIC, LCC-44
文件页数: 5/48页
文件大小: 379K
代理商: IS80C52-24PL
IS80C52
IS80C32
Integrated Silicon Solution, Inc. — 1-800-379-4774
13
MC004-1D
11/19/98
ISSI
TMOD:
Timer/Counter Mode Control Register.
Not Bit Addressable.
Timer 1
Timer 0
GATE C/
TTTTT M1 M0
GATE
C/
TTTTT M1 M0
GATE When TRx (in TCON) is set and GATE=1, TIMER/
COUNTERx will run only while INTx pin is high
(hardware control). When GATE=0, TIMER/
COUNTERx will run only while TRx=1 (software
control).
C/
T
Timer or Counter selector. Cleared for Timer
operation (input from internal system clock). Set
for Counter operation (input from Tx input pin).
M1
Mode selector bit.(1)
M0
Mode selector bit.(1)
Note 1:
M1
M0
Operating mode
0
Mode 0. (13-bit Timer)
0
1
Mode 1. (16-bit Timer/Counter)
1
0
Mode 2. (8-bit auto-load Timer/Counter)
1
Mode 3. (Splits Timer 0 into TL0 and
TH0. TL0 is an 8-bit Timer/Counter con-
troller by the standard Timer 0 control
bits. TH0 is an 8-bit Timer and is con-
trolled by Timer 1 control bits.)
1
Mode 3. (Timer/Counter 1 stopped).
SCON:
Serial Port Control Register. Bit Addressable.
7
6
54321
0
SM0 SM1
SM2
REN
TB8
RB8
TI
RI
Register Description:
SM0
SCON.7
Serial port mode specifier.(1)
SM1
SCON.6
Serial port mode specifier.(1)
SM2
SCON.5
Enable the multiprocessor com-
munication feature in mode 2 and 3. In
mode 2 or 3, if SM2 is set to 1 then RI
will not be activated if the received 9th
data bit (RB8) is 0. In mode 1, if
SM2=1 then RI will not be activated if
valid stop bit was not received. In
mode 0, SM2 should be 0.
REN SCON.4
Set/Cleared by software to Enable/
Disable reception.
TB8
SCON.3
The 9th bit that will be transmitted in
mode 2 and 3. Set/Cleared by
software.
RB8
SCON.2
In modes 2 and 3, RB8 is the 9th data
bit that was received. In mode 1, if
SM2=0, RB8 is the stop bit that was
received. In mode 0, RB8 is not used.
TI
SCON.1
Transmit interrupt flag. Set by
hardware at the end of the 8th bit time
in mode 0, or at the beginning of the
stop bit in the other modes. Must be
cleared by software.
RI
SCON.0
Receive interrupt flag. Set by hardware
at the end of the 8th bit time in mode
0, or halfway through the stop bit time
in the other modes (except see SM2).
Must be cleared by software.
Note:
SM0
SM1 MODE
Description
Baud rate
0
Shift register
Fosc/12
0
1
8-bit UART
Variable
1
0
2
9-bit UART
Fosc/64 or
Fosc/32
1
3
9-bit UART
Variable
相关PDF资料
PDF描述
IBM25NPE405H-3DA266C 32-BIT, 266 MHz, RISC PROCESSOR, PBGA580
ICS2494AN-XXX 135 MHz, VIDEO CLOCK GENERATOR, PDIP20
ICS9250YF-23 166.67 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO56
ICS9250YF-PPP-T 149.69 MHz, PROC SPECIFIC CLOCK GENERATOR, PDSO56
IBM25PPC750L-FB0A400W 32-BIT, 400 MHz, RISC PROCESSOR, CBGA360
相关代理商/技术参数
参数描述
IS80C52-24PLI 制造商:ISSI 制造商全称:Integrated Silicon Solution, Inc 功能描述:CMOS SINGLE CHIP LOW VOLTAGE 8-BIT MICROCONTROLLER
IS80C52-24PQ 制造商:ISSI 制造商全称:Integrated Silicon Solution, Inc 功能描述:CMOS SINGLE CHIP LOW VOLTAGE 8-BIT MICROCONTROLLER
IS80C52-24PQI 制造商:ISSI 制造商全称:Integrated Silicon Solution, Inc 功能描述:CMOS SINGLE CHIP LOW VOLTAGE 8-BIT MICROCONTROLLER
IS80C52-24W 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IS80C52-24WI 制造商:ISSI 制造商全称:Integrated Silicon Solution, Inc 功能描述:CMOS SINGLE CHIP LOW VOLTAGE 8-BIT MICROCONTROLLER