参数资料
型号: ISD5104X
厂商: WINBOND ELECTRONICS CORP
元件分类: 音频合成
英文描述: 240 SEC, SPEECH SYNTHESIZER WITH RCDG, UUC27
封装: LEAD FREE, DIE-27
文件页数: 4/89页
文件大小: 600K
代理商: ISD5104X
ISD5100 SERIES
- 12 -
Digital data is sent and received serially over the I
2C interface. The data is serial-to-parallel converted
and stored in one of two alternating (commutating) 64-bit shift registers. When an input register is full,
it becomes the register that is parallel written into the array. The prior write register becomes the new
serial input register. A mechanism is built-in to ensure there is always a register available for storing
new data.
Storing data in the memory is accomplished by accepting data one byte at a time and issuing an
acknowledge. If data is coming in faster than it can be written, the chip issues an acknowledge to the
host microcontroller, but holds SCL LOW until it is ready to accept more data. (See section 7.5.2 for
details).
The read mode is the opposite of the write mode. Data is read into one of two 64-bit registers from the
array and serially sent to the I
2C interface. (See section 7.5.3 for details).
7.3. OPERATIONAL MODES DESCRIPTION
7.3.1. I
2C Interface
To use more than four ISD5100 Series devices in an application requires some external switching of
the I
2C interface.
I
2C interface
Important note: The rest of this data sheet will assume that the reader is familiar with the I
2C
serial interface.
Additional information on I
2C may be found in section 10 on page 72 of this
document. If you are not familiar with this serial protocol, please read this section to
familiarize yourself with it.
A large amount of additional information on I
2C can also be found
on the Philips web page at
http://www.philips.com/.
I
2C Slave Address
The ISD5100 Series have 7-bit slave address of <100 00xy> where x and y are equal to the state,
respectively, of the external address pins A1 and A0. Because all data bytes are required to be 8
bits, the LSB of the address byte is the Read/Write selection bit that tells the slave whether to transmit
or receive data. Therefore, there are 8 possible slave addresses for the ISD5100-Series. These
are:
相关PDF资料
PDF描述
ISD5108EYI 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5108EY 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5108SYI 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5108SY 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5108X 480 SEC, SPEECH SYNTHESIZER WITH RCDG, UUC27
相关代理商/技术参数
参数描述
ISD5108EY 功能描述:IC VOICE REC/PLAY 4-8MN 28-TSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5108EYI 功能描述:IC VOICE REC/PLAY 4-8MN 28-TSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5108EYIR 功能描述:IC VOICE REC/PLAY 4-8MN 28-TSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5108EYR 功能描述:IC VOICE REC/PLAY 4-8MN 28-TSOP RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5108SY 功能描述:IC VOICE REC/PLAY 4-8MN 28-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000