参数资料
型号: ISD5108SYI
厂商: WINBOND ELECTRONICS CORP
元件分类: 音频合成
英文描述: 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
封装: 0.300 MM INCH, LEAD FREE, PLASTIC, SOIC-28
文件页数: 17/89页
文件大小: 600K
代理商: ISD5108SYI
ISD5100 SERIES
- 24 -
6.
Don’t Care bits—The following stages are not used in Feed Through Mode. Their bits may be
set to either level. In this example, we will set all the following bits to a ZERO. (a). Bit INS0, bit
D9 of CFG0 controls the Input Source Mux. (b). Bits AXG0 and AXG1 are bits D11 and D12
respectively in CFG0. They control the AUX IN amplifier gain setting. (c). Bits FLD0 and FLD1
are bits D2 and D3 respectively in CFG1. They control the sample rate and filter band pass
setting. (d). Bit FLS0 is bit D4 in CFG1. It controls the FILTER MUX. (e). Bits S1S0 and S1S1
are bits D9 and D10 of CFG1. They control the SUM1 MUX. (f). Bits VOL0, VOL1 and VOL2
are bits D11, D12 and D13 of CFG1. They control the setting of the Volume Control. (g). Bits
VLS0 and VLS1 are bits D14 and D15 of CFG1. They control the Volume Control MUX.
The end result of the above set up is
CFG0=0100 0100 0000 1011 (hex 440B)
and
CFG1=0000 0001 1110 0011 (hex 01E3).
Since both registers are being loaded, CFG0 is loaded, followed by the loading of CFG1. These two
registers must be loaded in this order. The internal set up for both registers will take effect synchro-
nously with the rising edge of SCL.
7.3.8. Call Record
The call record mode adds the ability to record an incoming phone call. In most applications, the
ISD5100 Series would first be set up for Feed Through Mode as described above. When the user
wishes to record the incoming call, the setup of the chip is modified to add that ability. For the purpose
of this explanation, we will use the 6.4 kHz sample rate during recording.
The block diagram of the ISD5100 Series shows that the Multilevel Storage array is always driven
from the SUM2 SUMMING amplifier. The path traces back from there through the LOW PASS Filter,
THE FILTER MUX, THE SUM1 SUMMING amplifier, the SUM1 MUX, then from the ANA in amplifier.
Feed Through Mode has already powered up the ANA IN amp so we only need to power up and
enable the path to the Multilevel Storage array from that point:
1. Select the ANA IN path through the SUM1 MUX—Bits S1S0 and S1S1 control the state of the
SUM1 MUX. These are bits D9 and D10 respectively of CFG1 and they should be set to the
state where both D9 and D10 are ZERO to select the ANA IN path.
2. Select the SUM1 MUX input (only) to the S1 SUMMING amplifier—Bits S1M0 and S1M1
control the state of the SUM1 SUMMING amplifier. These are bits D7 and D8 respectively of
CFG1 and they should be set to the state where D7 is ONE and D8 is ZERO to select the
SUM1 MUX (only) path.
3. Select the SUM1 SUMMING amplifier path through the FILTER MUX—Bit FLS0 controls the
state of the FILTER MUX. This is bit D4 of CFG1 and it must be set to ZERO to select the
SUM1 SUMMING amplifier path.
相关PDF资料
PDF描述
ISD5108SY 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5108X 480 SEC, SPEECH SYNTHESIZER WITH RCDG, UUC27
ISD5116EYI 960 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5116EY 960 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
ISD5116SYI 960 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
相关代理商/技术参数
参数描述
ISD5108SYIR 功能描述:IC VOICE REC/PLAY 4-8MN 28-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5108SYR 功能描述:IC VOICE REC/PLAY 4-8MN 28-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5116 制造商:WINBOND 制造商全称:Winbond 功能描述:Single-Chip Voice Record/Playback Device Up to 16-Minute Duration with Digital Storage Capability
ISD5116E 功能描述:IC VOICE REC/PLAY 8-16MN 28-TSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD5116ED 功能描述:IC VOICE REC/PL 8-16MN EX 28TSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD5100 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000