参数资料
| 型号： | ISL55100BIRZ |
| 厂商： | Intersil |
| 文件页数： | 11/14页 |
| 文件大小： | 0K |
| 描述： | IC COMP DRVR/WINDOW 18V 72-QFN |
| 标准包装： | 30 |
| 类型： | 收发器 |
| 驱动器/接收器数： | 4/4 |
| 规程： | LVDS |
| 电源电压： | 15 V ~ 18 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 72-VFQFN 裸露焊盘 |
| 供应商设备封装： | 72-QFN-EP（10x10） |
| 包装： | 管件 |
6
FN6229.1
November 24, 2008
POWER SUPPLIES, DRIVER/RECEIVER STATIC CONDITIONS VEXT = VEE + 5.5V, EXTERNAL LOGIC POWER OPTION USED. (Note 8)
Positive Supply Current
ICC
VCC = VH = 12V, VEE = VL = -3V,
VEXT =VEE + 5.5V, Outputs Unloaded
-35
50
mA
Negative Supply Current
IEE
VCC = VH = 12V, VEE = VL = -3V,
VEXT =VEE + 5.5V, Outputs Unloaded
-50
-35
-
mA
VEXT Supply Current
IEXT
VCC = VH = 12, VEE = VL = -3V,
VEXT =VEE + 5.5V, Outputs Unloaded
-25
40
mA
NOTES:
3. Lab characterization, room temp, Timing Parameters Matched Stimulus/Loads, Channel-to-Channel Skew < 500ps, 1ns Max by design.
4. Measured across 100pF/1k lump sum load + 15pF PCB/Scope Probe. Cap and Resistor Surface Mount/Stacked ~0.5” from Pin.
5. To Enable LOWSWING, connect LOWSWING to VEE and keep VH < VEE + 5. To disable LOWSWING, connect it to VCC.
6. When VEXT is connected to VEE (External Device Power not used) then the Minimum VCC - VEE is 12V. When VEXT is connected to an external
5.5V supply, then the minimum VCC - VEE voltage is 9V. Recommended VEXT = 5.5V as referenced to VEE.
7. ICC and IEE values are based on static conditions and will increase with pattern rates. ICC and IEE reach 400mA to 500mA at maximum data
rates (provided sufficient device cooling is employed). These currents can be reduced by 1) Reducing the VCC - VEE operating voltage 2)
Utilizing the VEXT option.
8. When using VEXT = 5.5V, current requirements of the VEXT input can approach 100mA at maximum pattern rates.
9. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization
and are not production tested.
Test Circuits and Waveforms
FIGURE 1. DRIVER SWITCHING TEST CIRCUIT
FIGURE 2. DRIVER PROPAGATION DELAY AND TRANSITION TIME MEASUREMENT POINTS
Electrical Specifications
Test Conditions: VCC = 12V, VEE = -3V, VH = 6V, VL = 0V, Comp-High = 5V, Comp Low = 0V, VEXT = VEE and
LOWSWING = VCC, +25°C; Unless Otherwise specified. (Continued)
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
TYP
MAX
UNITS
1k
Ω
VO
DATA-
DRV EN+
DRV EN-
VH
VL
DOUT
DATA+
(NOTE 3)
100pF
VO
400mV
0V
tPDLH
VOH (≈VH)
VOL (≈VL)
50%
tPDHL
DATA-
DATA+
tR
tF
DATA = 1
DATA = 0
ISL55100B
相关PDF资料 |
PDF描述 |
|---|---|
| ISL5627INZ | IC DAC DUAL 8BIT 3.3V 48-LQFP |
| ISL5629/2INZ | IC DAC 8BIT CMOS DUAL 48LQFP |
| ISL5727INZ | IC DAC DUAL 10BIT 3.3V 48-LQFP |
| ISL5729/2INZ | IC DAC 10BIT CMOS DUAL 48LQFP |
| ISL5757IBZ | IC DAC 10BIT 260MHZ 28-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL55100BIRZ-T | 功能描述:IC COMP DRVR/WINDOW 18V 72-QFN RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器，接收器，收发器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 类型:发射器 驱动器/接收器数:4/0 规程:RS422，RS485 电源电压:4.75 V ~ 5.25 V 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:带卷 (TR) |
| ISL55110 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual, High Speed MOSFET Driver |
| ISL55110_0712 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual, High Speed MOSFET Driver |
| ISL55110_11 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual, High Speed MOSFET Driver |
| ISL55110EVAL1Z | 功能描述:电源管理IC开发工具 ISL59532IKEZ32X32VID CROSPNT SNGL END IN RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
发布紧急采购，3分钟左右您将得到回复。