- 您现在的位置：买卖IC网 > PDF目录176104 > ISL6292DCRZ-T (INTERSIL CORP) Li-ion/Li Polymer Battery Charger PDF资料下载
参数资料
| 型号： | ISL6292DCRZ-T |
| 厂商： | INTERSIL CORP |
| 元件分类： | 电源管理 |
| 英文描述： | Li-ion/Li Polymer Battery Charger |
| 中文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PQCC16 |
| 封装： | 4 X 4 MM, LEAD FREE, PLASTIC, MO-220-VGGC, QFN-16 |
| 文件页数： | 8/13页 |
| 文件大小： | 461K |
| 代理商： | ISL6292DCRZ-T |
4
Pin Description
VIN (Pin 1, 15, 16)
VIN is the input power source. Connect to a wall adapter.
STAT2 (Pin 2)
STAT2 is an open-drain output to indicate the charger status.
This pin is pulled to LOW during charging and to HIGH when
not charging. When a fault situation occurs, the pin outputs a
one-speed blinking indication.
STAT1 (Pin 3)
STAT1 is an open-drain output to indicate the charger status.
The STAT1 pin is pulled LOW when the charger is charging
a battery and to HIGH when the charge finishes. This pin
outputs two different speeds of blinking signal depending on
the type of the fault case.
TIME (Pin 4)
The TIME pin determines the oscillation period by
connecting a timing capacitor between this pin and GND.
The oscillator also provides a time reference for the charger.
GND (Pin 5)
GND is the connection to system ground.
TOEN (Pin 6)
TOEN is the TIMEOUT enable input pin. Pulling this pin to
LOW disables the TIMEOUT charge-time limit for the fast
charge modes. Leaving this pin HIGH or floating enables the
TIMEOUT limit.
EN (Pin 7)
EN is the enable logic input. Connect the EN pin to LOW to
disable the charger or leave it floating to enable the charger.
V2P8 (Pin 8)
This is a 2.8V reference voltage output. This pin outputs a
2.8V voltage source when the input voltage is above POR
threshold and outputs zero otherwise. The V2P8 pin can be
used as an indication for adapter presence. Use a 1
F
ceramic capacitor to stabilize the internal linear regulator.
IREF (Pin 9)
This is the programming input for the constant charging
current.
IMIN (Pin 10)
IMIN is the programmable input for the end-of-charge
current.
TEMP (Pin 11)
TEMP is the input for an external NTC thermistor. The TEMP
pin is also used for battery removal detection.
VBAT (Pin 12, 13, 14)
VBAT is the connection to the battery. Typically a 10
F
Tantalum capacitor is needed for stability when there is no
battery attached. When a battery is attached, only a 0.1
F
ceramic capacitor is required as the minimum decoupling
capacitor.
Typical Application
V2P8
EN
GND
VBAT
IREF
STAT2
VIN
5V WALL
ADAPTER
BATTERY
PACK
IMIN
TEMP
STAT1
TIME
ISL6292D
V2P8
TOEN
T
C1
10F
330
R1
C2
1F
RT
RU
C3
RIREF
80k
CTIME
15nF
D1
RIMIN
80k
1F
+
-
ISL6292D
相关PDF资料 |
PDF描述 |
|---|---|
| ISL6537ACR | ACPI Regulator/Controller for Dual Channel DDR Memory Systems |
| ISL6537A | ACPI Regulator/Controller for Dual Channel DDR Memory Systems |
| ISL6612BIRZ-T | Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP |
| ISL6613BIRZ-T | Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP |
| ISL6740IBZ | Flexible Double Ended Voltage and Current Mode PWM Controllers |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL6292EVAL1 | 功能描述:EVALUATION BOARD 1 ISL6292 RoHS:否 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP |
| ISL6292EVAL1Z | 功能描述:EVAL BOARD 1 FOR ISL6292 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:* 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板 |
| ISL6292EVAL2 | 功能描述:EVALUATION BOARD 2 ISL6292 RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板 |
| ISL6292EVAL2Z | 功能描述:EVALUATION BOARD FOR ISL6292 RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:PCI Express® (PCIe) 主要目的:接口，收发器，PCI Express 嵌入式:- 已用 IC / 零件:DS80PCI800 主要属性:- 次要属性:- 已供物品:板 |
| ISL6293 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Li-ion/Li Polymer Battery Charger Accepting Two Power Sources |
发布紧急采购，3分钟左右您将得到回复。