- 您现在的位置：买卖IC网 > PDF目录17331 > ISL97646IRZ-EVALZ (Intersil)BOARD EVALUATION FOR ISL97646 PDF资料下载
参数资料
| 型号： | ISL97646IRZ-EVALZ |
| 厂商： | Intersil |
| 文件页数： | 14/15页 |
| 文件大小： | 0K |
| 描述： | BOARD EVALUATION FOR ISL97646 |
| 标准包装： | 1 |
| 主要目的： | DC/DC，LDO 步升 |
| 输出及类型： | 2，非隔离 |
| 电流 - 输出： | 350mA |
| 输入电压： | 2.7 ~ 5.5 V |
| 稳压器拓扑结构： | 升压 |
| 频率 - 开关： | 650kHz，1.2MHz |
| 板类型： | 完全填充 |
| 已供物品： | 板 |
| 已用 IC / 零件： | ISL97646 |
ISL97646
Layout Recommendation
The device’s performance including efficiency, output noise,
transient response and control loop stability is dramatically
affected by the PCB layout. PCB layout is critical, especially
at high switching frequency.
There are some general guidelines for layout:
1. Place the external power components (the input
capacitors, output capacitors, boost inductor and output
diodes, etc.) in close proximity to the device. Traces to
these components should be kept as short and wide as
possible to minimize parasitic inductance and resistance.
2. Place V IN and VDD bypass capacitors close to the pins.
3. Reduce the loop area with large AC amplitudes and fast
slew rate.
4. The feedback network should sense the output voltage
directly from the point of load, and be as far away from LX
node as possible.
5. The power ground (PGND) and signal ground (SGND)
pins should be connected at only one point.
6. The exposed die plate, on the underneath of the
package, should be soldered to an equivalent area of
metal on the PCB. This contact area should have multiple
via connections to the back of the PCB as well as
connections to intermediate PCB layers, if available, to
maximize thermal dissipation away from the IC.
7. To minimize the thermal resistance of the package when
soldered to a multi-layer PCB, the amount of copper track
and ground plane area connected to the exposed die
plate should be maximized and spread out as far as
possible from the IC. The bottom and top PCB areas
especially should be maximized to allow thermal
dissipation to the surrounding air.
8. A signal ground plane, separate from the power ground
plane and connected to the power ground pins only at the
exposed die plate, should be used for ground return
connections for control circuit.
9. Minimize feedback input track lengths to avoid switching
noise pick-up.
A demo board is available to illustrate the proper layout
implementation.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
14
FN6265.1
December 14, 2007
相关PDF资料 |
PDF描述 |
|---|---|
| RBC17DRYH | CONN EDGECARD 34POS DIP .100 SLD |
| 195D475X9015E2T | CAP TANT 4.7UF 15V 10% 2208 |
| IR3312 | IC SWITCH HI-SIDE 1CH TO-220-5 |
| 195D475X0015E2T | CAP TANT 4.7UF 15V 20% 2208 |
| A9BBA-0804E | FLEX CABLE - AFJ08A/AE08/AFJ08A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISL97646IRZ-T | 功能描述:直流/直流开关调节器 ISL97646IRZOOST +L DO +VON SLICE +VCOM RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| ISL97646IRZ-TK | 功能描述:直流/直流开关调节器 ISL97646IRZOOST +L DO +VON SLICE +VCOM RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
| ISL97648IRTZ | 功能描述:IC BOOST DC/DC REG RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 标准包装:2,000 系列:- 应用:控制器，DSP 输入电压:4.5 V ~ 25 V 输出数:2 输出电压:最低可调至 1.2V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:30-TFSOP（0.173"，4.40mm 宽） 供应商设备封装:30-TSSOP 包装:带卷 (TR) |
| ISL97648IRTZ-T | 制造商:Intersil Corporation 功能描述:HIGH VOLTAGE TFT-LCD LOGIC DRIVER (56 LD TQFN 8X8) - Tape and Reel |
| ISL97648IRTZ-TK | 制造商:Intersil Corporation 功能描述:HIGH VOLTAGE TFT-LCD LOGIC DRIVER (56 LD TQFN 8X8) - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。