参数资料
型号: ISPPAC-CLK5304S-01TN48C
厂商: Lattice Semiconductor Corporation
文件页数: 9/56页
文件大小: 0K
描述: IC CLOCK PROGRAM BUFFER 48TQFP
标准包装: 250
系列: ispClock™
类型: 时钟发生器,扇出配送,零延迟缓冲器
PLL: 带旁路
输入: HSTL,LVCMOS,LVDS,LVPECL,LVTTL,SSTL
输出: eHSTL,HSTL,LVCMOS,LVTTL,SSTL
电路数: 1
比率 - 输入:输出: 2:4
差分 - 输入:输出: 是/无
频率 - 最大: 267MHz
除法器/乘法器: 是/无
电源电压: 3 V ~ 3.6 V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 48-LQFP
供应商设备封装: 48-TQFP(7x7)
包装: 托盘
Lattice Semiconductor
ispClock5300S Family Data Sheet
17
Detailed Description
PLL Subsystem
The ispClock5300S provides an integral phase-locked-loop (PLL) which may be used to generate output clock sig-
nals at lower, higher, or the same frequency as a user-supplied input reference signal. The core functions of the
PLL are an edge-sensitive phase detector, a programmable loop lter, and a high-speed voltage-controlled oscilla-
tor (VCO). Additionally, a set of programmable feedback dividers (V[0, 1, 2]) is provided to support the synthesis of
different output frequencies.
Phase/Frequency Detector
The ispClock5300S provides an edge-sensitive phase/frequency detector (PFD), which means that the device will
function properly over a wide range of input clock reference duty cycles. It is only necessary that the input refer-
ence clock meet specied minimum HIGH and LOW times (tCLOCKHI, tCLOCKLO) for it to be properly recognized by
the PFD. The PFD’s output is of a classical charge-pump type, outputting charge packets which are then integrated
by the PLL‘s loop lter.
A lock-detection feature is also associated with the PFD. When the ispClock5300S is in a LOCKED state, the
LOCK output pin goes HIGH. The number of cycles required before asserting the LOCK signal in frequency-lock
mode can be set from 16 through 256.
When the lock condition is lost the LOCK signal will be de-asserted (Logic ‘0’) immediately.
Loop Filter: The loop lter parameters for each prole are automatically selected by the PAC-Designer software
depending on the following:
Maximum VCO operating frequency
Spread Spectrum Support: The reference clock inputs of the ispClock5300S device are spread spectrum clock
tolerant. The tolerance limits are:
Center spread ±0.125% to ±2%
Down spread -0.25% to 0.5%
30-33kHz modulation frequency
The ispClock5300S PLL has two modes of operation:
Spread Spectrum setting turned on - Spread Spectrum modulation is transferred from input to output with
minimal attenuation.
Spread Spectrum setting turned off - Spread Spectrum modulation transfer from input to output is attenu-
ated. The extent of attenuation depends on the VCO operating frequency and the feedback divider value.
相关PDF资料
PDF描述
VE-25L-MW-S CONVERTER MOD DC/DC 28V 100W
SY100S839VZG TR IC CLOCK GEN 3.3/5V 20-SOIC
VI-244-IV CONVERTER MOD DC/DC 48V 150W
SY100S834ZG TR IC CLOCK GEN 3.3/5V 16-SOIC
VE-2TX-IV CONVERTER MOD DC/DC 5.2V 150W
相关代理商/技术参数
参数描述
ISPPACCLK5304S-01TN48C 制造商:LATTICE 制造商全称:Lattice Semiconductor 功能描述:In-System Programmable, Zero-Delay, Universal Fan-Out Buffer, Single-Ended
ispPAC-CLK5304S-01TN48I 功能描述:时钟驱动器及分配 ISP 0 Delay Unv Fan- Out Buf-Sngl End I RoHS:否 制造商:Micrel 乘法/除法因子:1:4 输出类型:Differential 最大输出频率:4.2 GHz 电源电压-最大: 电源电压-最小:5 V 最大工作温度:+ 85 C 封装 / 箱体:SOIC-8 封装:Reel
ISPPACCLK5304S-01TN48I 制造商:LATTICE 制造商全称:Lattice Semiconductor 功能描述:In-System Programmable, Zero-Delay, Universal Fan-Out Buffer, Single-Ended
ISPPACCLK5304S-01TN64C 制造商:LATTICE 制造商全称:Lattice Semiconductor 功能描述:In-System Programmable, Zero-Delay, Universal Fan-Out Buffer, Single-Ended
ISPPACCLK5304S-01TN64I 制造商:LATTICE 制造商全称:Lattice Semiconductor 功能描述:In-System Programmable, Zero-Delay, Universal Fan-Out Buffer, Single-Ended