参数资料
型号: IV80C31-25R
厂商: ATMEL CORP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, 25 MHz, MICROCONTROLLER, PQFP44
封装: 1.40 MM HEIGHT, QFP-44
文件页数: 86/91页
文件大小: 19688K
代理商: IV80C31-25R
44
7707F–AVR–11/10
AT90USB82/162
Bit 4 - Res: Reserved bit
This bit is reserved and will always read as zero.
Bit 3 - PRTIM1: Power Reduction Timer/Counter1
Writing a logic one to this bit shuts down the Timer/Counter1 module. When the Timer/Counter1
is enabled, operation will continue like before the shutdown.
Bit 2 - PRSPI: Power Reduction Serial Peripheral Interface
Writing a logic one to this bit shuts down the Serial Peripheral Interface by stopping the clock to
the module. When waking up the SPI again, the SPI should be re initialized to ensure proper
operation.
Bit 1 - Res: Reserved bit
These bits are reserved and will always read as zero.
Bit 0 - Res: Reserved bit
These bits are reserved and will always read as zero.
8.6.2
Power Reduction Register 1 - PRR1
Bit 7 - PRUSB: Power Reduction USB
Writing a logic one to this bit shuts down the USB by stopping the clock to the module. When
waking up the USB again, the USB should be re initialized to ensure proper operation.
Bit 6..1 - Res: Reserved bits
These bits are reserved and will always read as zero.
Bit 0 - PRUSART1: Power Reduction USART1
Writing a logic one to this bit shuts down the USART1 by stopping the clock to the module.
When waking up the USART1 again, the USART1 should be re initialized to ensure proper
operation.
8.7
Minimizing Power Consumption
There are several issues to consider when trying to minimize the power consumption in an AVR
controlled system. In general, sleep modes should be used as much as possible, and the sleep
mode should be selected so that as few as possible of the device’s functions are operating. All
functions not needed should be disabled. In particular, the following modules may need special
consideration when trying to achieve the lowest possible power consumption.
8.7.1
Analog Comparator
When entering Idle mode, the Analog Comparator should be disabled if not used. In other sleep
modes, the Analog Comparator is automatically disabled. However, if the Analog Comparator is
set up to use the Internal Voltage Reference as input, the Analog Comparator should be dis-
abled in all sleep modes. Otherwise, the Internal Voltage Reference will be enabled,
Bit
7
654
3
2
1
0
PRUSB
-
PRUSART1
PRR1
Read/Write
R/W
R
R/W
R
R/W
Initial Value
0
相关PDF资料
PDF描述
IT80C31-20R 8-BIT, 20 MHz, MICROCONTROLLER, PQFP44
IS80C51C-16R 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
IS80C51C-L16R 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
IF180C51C-12R 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44
IF280C51C-12D 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
IV80C31-30 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IV80C31-36 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IV80C31-L16 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IV80C32-12 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
IV80C32-12R 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller