- 您现在的位置：买卖IC网 > PDF目录299238 > JANTX2N3999 TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-210AA PDF资料下载
参数资料
| 型号： | JANTX2N3999 |
| 英文描述： | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-210AA |
| 中文描述： | 晶体管|晶体管|叩| 80V的五（巴西）总裁| 5A条一（c）|至210AA |
| 文件页数： | 20/20页 |
| 文件大小： | 128K |
| 代理商： | JANTX2N3999 |
MIL-PRF-19500/560E
9
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2 Qualification. Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer's list (QML)
before contract award (see 4.2 and 6.3).
3.3 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
3.4 Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500 and on figure 1 (TO-39), figures 2, 3, and 4 (JANHC and JANKC) and figure 5 for U3 (TO–276AA)
devices herein.
3.4.1 Lead finish. Unless otherwise specified, lead finish shall be solderable in accordance with in
MIL-PRF-19500, MIL-STD-750, and herein. Where a choice of lead finish is desired, it shall be specified in the
acquisition document (see 6.2).
3.5 Marking. Devices shall be marked in accordance with MIL-PRF-19500. At the option of the manufacturer,
marking may be omitted from the body, but shall be retained on the initial container.
3.6 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characteristics are as specified in 1.3, 1.4, and table I herein.
3.7 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table I, group
A herein.
3.8 Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Screening (see 4.3).
c.
Conformance inspection (see 4.4).
4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and herein.
* 4.2.1 JANHC and JANKC qualification. JANHC and JANKC qualification inspection shall be in accordance with
MIL-PRF-19500.
相关PDF资料 |
PDF描述 |
|---|---|
| JANTX2N5154 | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 2A I(C) | TO-39 |
| JANTX2N5154L | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 2A I(C) | TO-39 |
| JANTX2N5339 | TRANSISTOR | BJT | NPN | 100V V(BR)CEO | 5A I(C) | TO-39 |
| JANTXV2N3506A | BJT |
| JANTXV2N3506AL | BJT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JANTX2N4029 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 80V 1A 3-Pin TO-18 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk |
| JANTX2N4033 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 80V 1A 3-Pin TO-39 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk 制造商:Microsemi 功能描述:Trans GP BJT PNP 80V 1A 3-Pin TO-39 |
| JANTX2N4033UA | 制造商:Microsemi Corporation 功能描述:2N4033UAJANTX - Bulk |
| JANTX2N4033UB | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Waffle Pack |
| JANTX2N4091 | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR - Bulk 制造商:Microsemi Corporation 功能描述:JFET N-CH 40V 360MW TO-18 |
发布紧急采购，3分钟左右您将得到回复。