- 您现在的位置：买卖IC网 > PDF目录299238 > JANTX2N3999 TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-210AA PDF资料下载
参数资料
| 型号： | JANTX2N3999 |
| 英文描述： | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 5A I(C) | TO-210AA |
| 中文描述： | 晶体管|晶体管|叩| 80V的五（巴西）总裁| 5A条一（c）|至210AA |
| 文件页数： | 4/20页 |
| 文件大小： | 128K |
| 代理商： | JANTX2N3999 |
MIL-PRF-19500/560E
12
* 4.4.3.1 Group C inspection, table VII of MIL-PRF-19500.
Subgroup
Method
Condition
C2
2036
Test condition E.
C5
3131
See 4.5.3.
C6
1037
For solder die attach: VCB ≥ 10 V dc, TA = Room ambient as defined in the
general requirements of MIL-STD-750. 6,000 cycles.
*
C6
1027
For eutectic die attach: VCB ≥ 10 V dc, adjust PT to achieve TJ = + 175°C min.
* 4.4.4 Group E inspection, Group E inspection shall be conducted in accordance with the conditions specified for
subgroup testing in table IX of MIL-PRF-19500, and herein. Electrical measurements (end-points) shall be in
accordance with group A, subgroup 2 herein. Group E inspection shall be performed for qualification or re-
qualification only. In case qualification was awarded to a prior revision of the spec sheet that did not request the
performance of table II tests, the tests specified in table II herein must be performed to maintain qualification.
4.5 Method of inspection. Methods of inspection shall be as specified in the appropriate tables and as follows.
4.5.1 Pulse measurements. Conditions for pulse measurement shall be as specified in section 4 of MIL-STD-750.
4.5.2 Input capacitance. This test shall be conducted in accordance with method 3240 of MIL-STD-750, except
the output capacitor shall be omitted.
4.5.3 Thermal resistance (to be performed for qualification inspection only). The thermal resistance
measurements shall be conducted in accordance with method 3131 of MIL-STD-750. The following details shall
apply:
a.
Collector current magnitude during power application shall be 0.15 A dc.
b.
Collector to emitter voltage magnitude shall be 20 V dc.
c.
Reference temperature measuring point shall be the case.
d.
Reference point temperature shall be + 25
°C ≤ T
R ≤ +35° C and recorded before the test is started.
e.
Mounting arrangement shall be with heat sink to case.
f.
Maximum limit shall be R
θJC = 17.5° C/W for TO-39 devices and RθJC = 1.7.5° C/W for U3 devices.
相关PDF资料 |
PDF描述 |
|---|---|
| JANTX2N5154 | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 2A I(C) | TO-39 |
| JANTX2N5154L | TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 2A I(C) | TO-39 |
| JANTX2N5339 | TRANSISTOR | BJT | NPN | 100V V(BR)CEO | 5A I(C) | TO-39 |
| JANTXV2N3506A | BJT |
| JANTXV2N3506AL | BJT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JANTX2N4029 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 80V 1A 3-Pin TO-18 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk |
| JANTX2N4033 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 80V 1A 3-Pin TO-39 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk 制造商:Microsemi 功能描述:Trans GP BJT PNP 80V 1A 3-Pin TO-39 |
| JANTX2N4033UA | 制造商:Microsemi Corporation 功能描述:2N4033UAJANTX - Bulk |
| JANTX2N4033UB | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR (NPN) - Waffle Pack |
| JANTX2N4091 | 制造商:Microsemi Corporation 功能描述:NPN TRANSISTOR - Bulk 制造商:Microsemi Corporation 功能描述:JFET N-CH 40V 360MW TO-18 |
发布紧急采购，3分钟左右您将得到回复。