收藏本站
参数资料
型号： KAC-9617
厂商： Eastman Kodak Company
文件页数： 31/41页
文件大小： 0K
描述： IC SENSOR IMAGE VGA 48CLCC
标准包装： 480
象素大小： 7.5µm x 7.5µm
有源象素阵列： 648H x 488V
每秒帧数： 30
电源电压： 3.3V
类型： CMOS 成像
封装/外壳： 48-LCC
供应商设备封装： 48-LCC（14.22x14.22）
包装： 散装
请注意： *
其它名称： LM9617
IMAGE SENSOR SOLUTIONS
Register Set (continued)
Register Name
Address
Mnemonic
Type
Reset Value
Digital Video Mode 2
08 Hex
VMODE2
Read/Write
00 Hex
Register Name
Address
Mnemonic
Type
Reset Value
Scan Window Row Start Register
0B Hex
SROWS
Read/Write
00 Hex
Bit
7:4
Bit Symbol
HsyncAdjust
Description
Use to program the leading edge
of hsync to the first valid pixel at
the beginning of each row. This
can be 0-hex to F-hex corre-
sponding to 0 - 15 pixel clocks.
Default 0.
Bit
7:0
Bit Symbol
SwStartRow
[8:1]
Description
Use to program the scan window’s
start row address MSBs. If bit 6 of
register DWLSB is set to 1 the
start row address is incremented
by 1 else the raw value is used.
3:0
Register Name
Address
Mnemonic
Type
Reserved
Snapshot Mode Configuration Register
09 Hex
SNAPMODE
Read/Write
Register Name
Address
Mnemonic
Type
Reset Value
Scan Window Row End Register
0C Hex
SROWE
Read/Write
FB Hex
Reset Value
00 Hex
Bit
Bit Symbol
Description
Bit
7:6
Bit Symbol
SsFrames
Description
Program to set the number of
frames required before readout
during a snapshot with no external
shutter, (see Figure 24). By
7:0
SwEndRow
[8:1]
Use to program the scan window’s
end row address MSBs. If bit 6 of
register DWLSB is set to 1 the end
row address is incremented by 1.
else the raw value is used.
default these two bits are set to
00. Set to any value but 00 for
snapshot to function properly..:
Register Name
Address
Mnemonic
Scan Window Mode B LSB Register
0DHex
SWLSB
00
01
10
Reserved
one frame
two frames
Type Read/Write
Reset Value 00 Hexx
Bit Bit Symbol
Description
11
three frames
7
SwMode
Use to program the scan window’s
addressing mode. Set to a logic
5
ShutterMode
Assert to indicate that an external
shutter will be used during snap-
shot mode. Clear (the default) to
6:2
one for mode b and a logic 0 for
mode a.
Reserved
4
ExtSynPol
indicate that snapshot mode will
be carried out without the aid of an
external shutter.
Assert to set the active level of the
extsync signal to 0. Clear (the
1
0
SwEndRow
[0]
SwStartRow
[0]
Use to program bit 0 of the scan
window’s end row address.
Use to program bit 0 of the scan
window’s start row address.
default) to set the active level of
the extsync signal to 1.
Register Name
Address
Display Window Row Start Register
0E Hex
3
2
SnapshotMod
Reserved
Assert to set the snapshot pin to
level mode. In level mode the sen-
Mnemonic
Type
Reset Value
DROWS
Read/Write
00 Hex
sor will continually run snapshot
sequences as long as the snap-
shot pin is held to the active level.
Clear (the default) to set the snap-
shot signal to pulse mode. In
pulse mode the sensor will only
Bit
7:0
Bit Symbol
DwStartRow
Description
Use to program the display win-
dow’s start row address MSBs.
The LSB can be programmed
using the DWLSB register.
carry out one snapshot sequence
per pulse applied to the snapshot
pin.
Register Name
Address
Mnemonic
Display Row End Register
0F Hex
DROWE
1
SnapShotPol
Assert to set the snapshot pin to
be active on the positive edge.
Type
Reset Value
Read/Write
FB Hex
0
SnapEnable
Clear (the default) to set the snap-
shot pin to be active on the nega-
tive edge.
Set to enable the external snap-
shot pin. Clear (the default) to dis-
able the external snapshot pin.
Bit
7:0
Bit Symbol
DwEndRow
Description
Use to program the display win-
dow’s end row address. The LSB
can be programmed using the
DWLSB register.
www.kodak.com/go/imagers 585-722-4385
31
Email:imagers@kodak.com
相关PDF资料
PDF描述
KAC-9627 IC SENSOR IMAGE VGA 48CLCC
KB-A100SRW LIGHT BAR 660NM RED 8.89X3.81MM
KB-B100SRW LIGHT BAR 660NM RED 19.05X3.81MM
KB-C100SRW LIGHT BAR 660NM RED 8.89X8.89MM
KB-D100SRW LIGHT BAR 660NM RED 8.89X3.81MM
相关代理商/技术参数
参数描述
KAC-9618 功能描述:IC SENSOR IMAGE VGA MONO 48-CLCC RoHS:是 类别:传感器，转换器 >> 图像，相机 系列:- 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0
KAC-9618/HEADBOARD 功能描述:HEADBOARD FOR KAC-9618 RoHS:是 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
KAC-9618EVAL-KIT 功能描述:KIT EVALUATION SENSOR KAC-9618 RoHS:是 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
KAC-9619 功能描述:IC SENSOR IMAGE VGA 48-CLCC RoHS:是 类别:传感器，转换器 >> 图像，相机 系列:- 标准包装:480 系列:- 象素大小:6.7µm x 6.7µm 有源象素阵列:768H x 488V 每秒帧数:52 电源电压:3.3V 类型:CMOS 成像 封装/外壳:48-QFP 供应商设备封装:48-QFP 包装:托盘 请注意:* 配用:4H2105-ND - HEADBOARD FOR KAC-004014H2104-ND - KIT EVAL FOR KAC-00401 其它名称:4H20954H2095-NDKAC-00401-CBC-LB-A0
KAC-9619/HEADBOARD 功能描述:HEADBOARD FOR KAC-9619 RoHS:是 类别:编程器，开发系统 >> 过时/停产零件编号 系列:- 标准包装:1 系列:- 传感器类型:CMOS 成像，彩色（RGB） 传感范围:WVGA 接口:I²C 灵敏度:60 fps 电源电压:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相关产品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*