参数资料
| 型号： | KS8993 |
| 厂商： | Micrel Inc |
| 文件页数： | 5/35页 |
| 文件大小： | 0K |
| 描述： | IC SWITCH 10/100 3PORT 128PQFP |
| 标准包装： | 66 |
| 系列： | * |
| 类型： | * |
| 应用： | * |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 128-BFQFP |
| 供应商设备封装： | 128-PQFP（14x20） |
| 配用： | 576-1011-ND - BOARD EVAL EXPERIMENT FOR KS8993 |
第1页第2页第3页第4页当前第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页
May 2005
13
KS8993
Micrel
Group
I/O Names
Active Status
Description
VMDIS
H
VLAN Mismatch Discard control.
Pulled low = Constrict multicast and broadcast packets to VLAN.
Pulled high = Constrict all packets to VLAN (default).
PRSV
H
Reserve priority buffers.
Pulled low = No buffers reserved (default).
Pulled high = Reserve 96 buffers per port for high priority queue.
PBASE[2:0]
H
Priority base value used to compare with priority tag in 802.1p tag. When a packet is
received that has a 802.1p tag and 802.1p processing is enabled (Px_1PEN=H), the
PBASE value is compared to the tag priority field. If the packet tag is greater than or
equal to the PBASE value, the packet is sent to the higher priority transmit queue
while tags less than PBASE are sent to the lower priority queue. (default = 100).
PV12
H
VLAN mask bits. Used to select which ports are seen from any particular port. Use
PV13
the table below to select VLAN operation.
PV21
P1_V defined as (PV13, PV12, 1)
PV23
P2_V defined as (PV23, 1 , PV21)
PV31
P3_V defined as (1 , PV32, PV31)
PV32
P[3:1]_V
Port
2
1
0
VLAN State
1
0
1
Ports 1 and 2 in VLAN
1
0
1
Ports 1 and 3 in VLAN
1
Ports 1, 2 and 3 in VLAN (default)
2
0
1
Ports 1 and 2 in VLAN
1
0
Ports 2 and 3 in VLAN
1
Ports 1, 2 and 3 in VLAN (default)
3
1
0
1
Ports 1 and 3 in VLAN
1
0
Ports 2 and 3 in VLAN
1
Ports 1, 2 and 3 in VLAN (default)
Note that a minimum of 2 ports are required for each VLAN. The VLAN configuration
is viewed from the receiver perspective. All states not listed above are invalid.
P[3:1]_1PEN
H
Enables 802.1p prioritizing on a per port basis. The enable is from the receive
perspective. If the 802.1p processing is disabled or there is no tag, priority is dete-
mined by the P[3:1]_PP bit.
Pulled low = Disable 802.1p prioritizing (default).
Pulled high = Enable 802.1p prioritizing.
P[3:1]_PP
H
Selects port receive priority in the absence of 802.1p handling.
Pulled low = Low priority (default).
Pulled high = High priority.
P[3:1]_TAGINS
H
Inserts 802.1p tag in received packets if not already existent. The priority field is set
based on the port P[3:1]_PP bit. For the P[3:1]_PP bit tied low, the priority field is set
to 000 and for the P[3:1]_PP bit tied high, the priority field is set to 111.
Pulled low = No change to received packet (default).
Pulled high = Insert 802.1p tag.
Note that if P[3:1]_TAGINS and P[3:1]_TAGRM are both set for the same port, there
is no change to the packet.
P[3:1]_TAGRM
H
Removes 802.1p tag in received packets if they exist.
Pulled low = No change to received packet (default).
Pulled high = Remove 802.1p tag.
Note that if P[3:1]_TAGINS and P[3:1]_TAGRM are both set for the same port, there
is no change to the packet.
P[3:1]_TXQ2
H
Selects transmit queue split on a per port basis. The split sets up high and low priority
queues.
Pulled low = Single transmit queue (default)
Pulled high = Separate high and low transmit queues
相关PDF资料 |
PDF描述 |
|---|---|
| ABM44DRKN-S13 | CONN EDGECARD EXTEND 88POS .156 |
| ACM44DRKH-S13 | CONN EDGECARD EXTEND 88POS 0.156 |
| ABM44DRKH-S13 | CONN EDGECARD EXTEND 88POS .156 |
| AYM36DRSS | CONN EDGECARD 72POS DIP .156 SLD |
| ASM36DRSS | CONN EDGECARD 72POS DIP .156 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| KS8993_09 | 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:3-Port 10/100 Integrated Switch with PHY and Frame Buffer |
| KS8993-EVAL | 功能描述:BOARD EVAL EXPERIMENT FOR KS8993 RoHS:否 类别:编程器，开发系统 >> 评估演示板和套件 系列:- 产品培训模块:Obsolescence Mitigation Program 标准包装:1 系列:- 主要目的:电源管理，电池充电器 嵌入式:否 已用 IC / 零件:MAX8903A 主要属性:1 芯锂离子电池 次要属性:状态 LED 已供物品:板 |
| KS8993F | 功能描述:IC CONV MED 10/100 3PORT 128PQFP RoHS:是 类别:集成电路 (IC) >> 专用 IC 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| KS8993F-A1 | 功能描述:IC CONV MED 10/100 3PORT 128PQFP RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
| KS8993FA5 | 功能描述:IC SWITCH 3-PORT 10/100 128-PQFP RoHS:否 类别:集成电路 (IC) >> 专用 IC 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 类型:调帧器 应用:数据传输 安装类型:表面贴装 封装/外壳:400-BBGA 供应商设备封装:400-PBGA（27x27） 包装:散装 |
发布紧急采购，3分钟左右您将得到回复。