参数资料
型号: KSZ8893FQL-FX
厂商: Micrel Inc
文件页数: 6/117页
文件大小: 0K
描述: IC SWITCH ETH 3PORT 128-PQFP
标准包装: 66
控制器类型: 以太网开关控制器
接口: MII,RMII,SNI
电源电压: 3.1 V ~ 3.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 128-BFQFP
供应商设备封装: 128-PQFP(14x20)
包装: 托盘
产品目录页面: 1081 (CN2011-ZH PDF)
配用: 576-1603-ND - EVAL KIT EXPERIMENTAL KSZ8893MQL
其它名称: 576-3273
Micrel, Inc.
KSZ8893FQL
October 2007
103
M9999-101607-1.3
Examples:
1. MIB Counter Read (Read port 1 “Rx64Octets” Counter)
Write to reg. 121 (0x79) with 0x1c
// Read MIB counters selected
Write to reg. 122 (0x7A) with 0x0e
// Trigger the read operation
Then
Read reg. 128 (0x80), overflow bit [31]
// If bit 31 = 1, there was a counter overflow
valid bit [30]
// If bit 30 = 0, restart (reread) from this register
counter bits [29:24]
Read reg. 129 (0x81), counter bits [23:16]
Read reg. 130 (0x82), counter bits [15:8]
Read reg. 131 (0x83), counter bits [7:0]
2. MIB Counter Read (Read port 2 “Rx64Octets” Counter)
Write to reg. 121 (0x79) with 0x1c
// Read MIB counter selected
Write to reg. 122 (0x7A) with 0x2e
// Trigger the read operation
Then,
Read reg. 128 (0x80), overflow bit [31]
// If bit 31 = 1, there was a counter overflow
valid bit [30]
// If bit 30 = 0, restart (reread) from this register
counter bits [29:24]
Read reg. 129 (0x81), counter bits [23:16]
Read reg. 130 (0x82), counter bits [15:8]
Read reg. 131 (0x83), counter bits [7:0]
3. MIB Counter Read (Read “Port1 TX Drop Packets” Counter)
Write to reg. 121 (0x79) with 0x1d
// Read MIB counter selected
Write to reg. 122 (0x7A) with 0x00
// Trigger the read operation
Then
Read reg. 130 (0x82), counter bits [15:8]
Read reg. 131 (0x83), counter bits [7:0]
Additional MIB Counter Information
“Per Port” MIB counters are designed as “read clear.” These counters will be cleared after they are read.
“All Port Dropped Packet” MIB counters are not cleared after they are accessed and do not indicate overflow or validity;
therefore, the application must keep track of overflow and valid conditions.
To read out all the counters, the best performance over the SPI bus is (160+3)*8*200 = 260ms, where there are 160
registers, 3 overheads, 8 clocks per access, at 5MHz. In the heaviest condition, the counters will overflow in 2 minutes.
It is recommended that the software read all the counters at least every 30 seconds.
A high performance SPI master is also recommended to prevent counters overflow.
相关PDF资料
PDF描述
PIC12C509AT-04E/SN IC MCU OTP 1KX12 8SOIC
PIC16F1829T-I/SS MCU PIC 14K FLASH 1K RAM 20SSOP
V72A24C400BL3 CONVERTER MOD DC/DC 24V 400W
PIC16F677-E/SS IC PIC MCU FLASH 2KX14 20SSOP
V72A24C400BL2 CONVERTER MOD DC/DC 24V 400W
相关代理商/技术参数
参数描述
KSZ8893FQLI-FX 功能描述:以太网 IC 3-Port Ethernet Switch w MII/RMII Interface + 100FX (I-Temp, Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8893MBL 功能描述:以太网 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 128-Ld PQFP(Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8893MBL TR 功能描述:以太网 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 100-Ball LFBGA (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8893MBLI 功能描述:以太网 IC 2+1 Port 10/100 Switch w/ Tranceivers & Frame Buffers (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8893MQL 功能描述:以太网 IC 2+1 Port 10/100 Switch w/Tranceivers & Frame Buffers, 128-Ld PQFP(Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray