- 您现在的位置：买卖IC网 > PDF目录97995 > L5962 (STMICROELECTRONICS) SWITCHING REGULATOR, PDSO36 PDF资料下载
参数资料
| 型号： | L5962 |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 稳压器 |
| 英文描述： | SWITCHING REGULATOR, PDSO36 |
| 封装： | ROHS COMPLAINT, SOP-36 |
| 文件页数： | 7/24页 |
| 文件大小： | 242K |
| 代理商： | L5962 |
L5962
Device description
Doc ID 16819 Rev 2
4
Device description
The IC includes one standby regulator, always active to guarantee the standby functions;
two switched linear regulators, managed by the I2C bus and a step-down switching voltage
regulator with selectable current limit.
4.1
Regulators
The VSTBY regulator is always active when the IC is supplied.
The other regulators can be enabled or disabled. Their outputs are automatically disabled
whenever the VBAT voltage exceeds the over-voltage shutdown threshold. Upon return from
over-voltage shutdown, the outputs recover without intervention from the system.
4.1.1
Linear regulators
VSTBY (3.3 V / 5.0 V standby)
VSTBY is a linearly regulated 3.3/5 V output. This output is enabled on battery connect. It is
supplied from the protected battery input (VBATP).
In order to select the 3.3 V output, the VSTBYSEL pin must be connected to ground.
In order to select the 5.0 V output, the VSTBYSEL pin must be connected to 5 V.
When the dropout voltage of the regulator cannot be maintained, the output shall track the
VBATP input voltage less the saturation voltage of the regulator pass element.
This regulator has a short circuit protection consisting of current limit, and thermal
shutdown. If the local die temperature exceeds the thermal shutdown detection threshold,
the output is disabled. The thermal shutdown circuitry has hysteresis such that the output is
enabled only after the die temperature falls below the thermal shutdown disable threshold.
Thermal shutdown on this output doesn't directly disable any other circuitry.
RST provides an indication that VSTBY is in regulation. It is an open drain output used to
indicate that VSTBY is in regulation (below the low-voltage threshold). RST remains low
until VSTBY achieves regulation and the RSTDLY input has charged to its threshold. For
instance, RST remains low during battery connect and disconnect and under low-voltage
battery lockout. The transition from standby mode to active mode (and vice versa) does not
cause the RST output to be triggered.
RSTDLY provides a means to delay the releasing of RST once VSTBY has achieved
regulation. It is used to delay the release of RST when VSTBY achieves regulation. This
input has a current source to charge an external capacitor and an internal pull-down to
discharge the external capacitor. The voltage on this capacitor is used to control the
operation of the RST output.
The RSTDLY pull-down is activated when a loss of regulation is detected. The input remains
low until VSTBY once again achieves regulation.
When the RSTDLY is released the current source charges the external capacitor. When the
voltage exceeds the pin's threshold, RST pin is also released, disabling its pull-down.
相关PDF资料 |
PDF描述 |
|---|---|
| L5973DD | 3.5 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, PDSO8 |
| L5988D | 5.6 A SWITCHING REGULATOR, 1000 kHz SWITCHING FREQ-MAX, PDSO16 |
| L5994A | 1 A DUAL SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PQFP32 |
| L5994 | 1 A DUAL SWITCHING CONTROLLER, 345 kHz SWITCHING FREQ-MAX, PQFP32 |
| L6206PD013TR | STEPPER MOTOR CONTROLLER, 5.6 A, PDSO36 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| L5962TR | 功能描述:低压差稳压器 - LDO Multifunction Voltage Regulator RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| L5963D-EHX | 功能描述:Linear And Switching Voltage Regulator IC 3 Output Step-Down (Buck) Synchronous (2), Linear (LDO) (1) 250kHz ~ 2MHz 36-PowerFSOP (0.295", 7.50mm Width) 制造商:stmicroelectronics 系列:- 包装:管件 零件状态:有效 拓扑:降压（降压）同步（2），线性（LDO）（1） 功能:任何功能 输出数:3 频率 - 开关:250kHz ~ 2MHz 电压/电流 - 输出 1:可编程，2.5A 电压/电流 - 输出 2:可编程，3A 电压/电流 - 输出 3:可编程，250mA 带 LED 驱动器:无 带监控器:无 带定序器:无 电压 - 电源:3.5 V ~ 26 V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:36-??FSOP（0.295"，7.50mm 宽） 供应商器件封装:36-PWRSSO EP 标准包装:49 |
| L5963Q-V0Y | 功能描述:IC REG BCK/LIN/SYNC TRPL 48VFQFN 制造商:stmicroelectronics 系列:- 包装:托盘 零件状态:在售 拓扑:降压同步（1），线性（LDO）（1） 功能:任何功能 输出数:3 频率 - 开关:250kHz ~ 2MHz 电压/电流 - 输出 1:可编程，2.5A 电压/电流 - 输出 2:可编程，3A 电压/电流 - 输出 3:可编程，250mA 带 LED 驱动器:无 带监控器:无 带定序器:无 电压 - 电源:3.5 V ~ 26 V 工作温度:-40°C ~ 105°C 安装类型:表面贴装 封装/外壳:48-TFQFN 裸露焊盘 供应商器件封装:48-VFQFPN（7x7） 标准包装:260 |
| L5970 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:UP TO 1A STEP DOWN SWITCHING REGULATOR |
| L5970AD | 功能描述:直流/直流开关调节器 4.4-36V 1A Step-Down RoHS:否 制造商:International Rectifier 最大输入电压:21 V 开关频率:1.5 MHz 输出电压:0.5 V to 0.86 V 输出电流:4 A 输出端数量: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PQFN 4 x 5 |
发布紧急采购，3分钟左右您将得到回复。