- 您现在的位置：买卖IC网 > PDF目录53604 > L6506D (STMICROELECTRONICS) STEPPER MOTOR CONTROLLER, PDSO20 PDF资料下载
参数资料
| 型号： | L6506D |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 运动控制电子 |
| 英文描述： | STEPPER MOTOR CONTROLLER, PDSO20 |
| 封装： | SO-20 |
| 文件页数： | 4/8页 |
| 文件大小： | 474K |
| 代理商： | L6506D |
By substituting equations 1 and 2 into equation 3
and solving for the value of R1 the following equa-
tions for the external components can be derived :
1
R1 = (
– 2) RIN
(4)
DC
T1
C1 =
(5)
0.69 R1
Looking at equation 1 it can easily be seen that the
minimum pulse width of T2 will occur when the value
of R1 is at its minimum and the value of R1 at its
maximum. Therefore, when evaluating equation 4
the minimum value for R1 of 700
(1 K – 30 %)
should be used to guarantee the required pulse
width.
Figure 1 : Oscillator Circuit and Waveforms.
APPLICATIONS INFORMATION
The circuits shown in figure 2 use the L6506 to im-
plement constant current drives for stepper motors.
Figure 2 shows the L6506 used with the L298 to
drive a 2 phase bipolar motor. The peak current can
be calculated using the equation :
Vref
Ipeak =
Rsense
The circuit of Fig.2 can be used in applications re-
quiring different peak and hold current values by
modifying the reference voltage.
The L6506 may be used to implement either full step
or half step drives. In the case of 2 phase bipolar
stepper motor applications, if a half step drive is
used, the bridge requires an additional input to dis-
able the power stage during the half step. If used in
conjunction with the L298 the enable inputs may be
used for this purpose.
For quad darlington array in 4 phase unipolar motor
applications half step may be implemented using
the 4 phase inputs.
The L6506 may also be used to implement mi-
crostepping of either bipolar or unipolar motors.
L6506 -L6506D
4/8
相关PDF资料 |
PDF描述 |
|---|---|
| L6902D013TR | 3.2 A SWITCHING REGULATOR, 287 kHz SWITCHING FREQ-MAX, PDSO8 |
| L6911B | 3-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO20 |
| L9468N | SPECIALTY ANALOG CIRCUIT, SFM8 |
| L9830 | 2 A SWITCHING CONTROLLER, PSFM7 |
| L99PM60STR | POWER SUPPLY MANAGEMENT CKT, PDSO16 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| L6506D013TR | 功能描述:马达/运动/点火控制器和驱动器 Stepper Motor RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
| L6506D013TRE | 制造商:STMicroelectronics 功能描述: |
| L6506D1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Stepper Motor Controller/Driver |
| L6506DC013TR | 制造商:STMicroelectronics 功能描述:A 制造商:STMicroelectronics 功能描述:INDUSTRIAL & ASIC - Tape and Reel 制造商:STMicroelectronics 功能描述:Current CTRL Stepper 10V VCC 25mA |
| L650BB | 制造商:Thomas & Betts 功能描述:BB TERMINAL LUG |
发布紧急采购，3分钟左右您将得到回复。