参数资料
型号: L6599ADTR
厂商: STMICROELECTRONICS
元件分类: 稳压器
英文描述: SWITCHING CONTROLLER, PDSO16
封装: ROHS COMPLIANT, SOP-16
文件页数: 32/36页
文件大小: 1595K
代理商: L6599ADTR
L6599A
Pin connection
Doc ID 15308 Rev 5
5/36
3
Pin connection
Figure 2.
Pin connection (top view)
Table 2.
Pin description
Pin N#
Type
Function
1Css
Soft-start. This pin connects an external capacitor to GND and a resistor to
RFmin (pin 4) that set both the maximum oscillator frequency and the time
constant for the frequency shift that occurs as the chip starts up
(soft-start). An internal switch discharges this capacitor every time the chip
turns off (Vcc < UVLO, LINE < 1.24 V or > 6 V, DIS > 1.85 V, ISEN > 1.5 V,
DELAY > 2 V) to make sure it will be soft-started next, and when the
voltage on the current sense pin (ISEN) exceeds 0.8 V, as long as it stays
above 0.75 V.
2DELAY
Delayed shutdown upon overcurrent. A capacitor and a resistor are
connected from this pin to GND to set the maximum duration of an
overcurrent condition before the IC stops switching and the delay after
which the IC restarts switching. Every time the voltage on the ISEN pin
exceeds 0.8 V the capacitor is charged by an internal 150 A current
generator and is slowly discharged by the external resistor. If the voltage
on the pin reaches 2 V, the soft start capacitor is completely discharged so
that the switching frequency is pushed to its maximum value and the
150 A is kept always on. As the voltage on the pin exceeds 3.5 V the IC
stops switching and the internal generator is turned off, so that the voltage
on the pin will decay because of the external resistor. The IC will be soft-
restarted as the voltage drops below 0.3 V. In this way, under short circuit
conditions, the converter will work intermittently with very low input
average power.
3CF
Timing capacitor. A capacitor connected from this pin to GND is charged
and discharged by internal current generators programmed by the external
network connected to pin 4 (RFmin) and determines the switching
frequency of the converter.
相关PDF资料
PDF描述
LFA28DP 2-OUTPUT 75 W DC-DC REG PWR SUPPLY MODULE
LM2576T-12 7.5 A SWITCHING REGULATOR, 62 kHz SWITCHING FREQ-MAX, PSFM5
LS4501-7ERD0TB1 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
LS4501-7ERD1TB1 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
LS4601-7ERD0TB1 1-OUTPUT 100 W AC-DC PWR FACTOR CORR MODULE
相关代理商/技术参数
参数描述
L6599AFD 功能描述:Power Supply Controller Resonant Converter Controller 16-SO 制造商:stmicroelectronics 系列:- 包装:管件 零件状态:有效 应用:谐振转换器控制器 电压 - 输入:- 电压 - 电源:8.85 V ~ 16 V 电流 - 电源:3.5mA 工作温度:-50°C ~ 125°C 安装类型:表面贴装 封装/外壳:16-SOIC(0.154",3.90mm 宽) 供应商器件封装:16-SO 标准包装:50
L6599AN 功能描述:电压模式 PWM 控制器 Hi-Volt resonant controller, 500KHz RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel
L6599ATD 功能描述:电压模式 PWM 控制器 Sgl Output 13.3 V 200 KHz SOIC-16 Nrw RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel
L6599ATDTR 功能描述:开关变换器、稳压器与控制器 IMPROVED High-Volt RESONANT CONTROLLER RoHS:否 制造商:Texas Instruments 输出电压:1.2 V to 10 V 输出电流:300 mA 输出功率: 输入电压:3 V to 17 V 开关频率:1 MHz 工作温度范围: 安装风格:SMD/SMT 封装 / 箱体:WSON-8 封装:Reel
L6599ATN 制造商:STMicroelectronics 功能描述: