- 您现在的位置：买卖IC网 > PDF目录69003 > L6710 (STMICROELECTRONICS) 2 A SWITCHING CONTROLLER, PQFP44 PDF资料下载
参数资料
| 型号： | L6710 |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 稳压器 |
| 英文描述： | 2 A SWITCHING CONTROLLER, PQFP44 |
| 封装： | 10 X 10 MM, 1 MM HEIGHT, TQFP-44 |
| 文件页数： | 34/34页 |
| 文件大小： | 1610K |
| 代理商： | L6710 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页当前第34页
9/34
L6710
OSCILLATOR
The switching frequency is internally fixed at 150kHz. Each phase works at the frequency fixed by the os-
cillator so that the resulting switching frequency at the load side results in being doubled.
The internal oscillator generates the triangular waveform for the PWM charging and discharging with a
constant current an internal capacitor. The current delivered to the oscillator is typically 25
A
(Fsw=150kHz) and may be varied using an external resistor (ROSC) connected between OSC pin and
GND or Vcc. Since the OSC pin is maintained at fixed voltage (Typ. 1.237V), the frequency is varied pro-
portionally to the current sunk (forced) from (into) the pin considering the internal gain of 6KHz/
A.
In particular connecting it to GND the frequency is increased (current is sunk from the pin), while connect-
ing ROSC to Vcc=12V the frequency is reduced (current is forced into the pin), according to the following
relationships:
ROSC vs. GND:
ROSC vs. 12V:
Note that forcing 25
A into this pin, the device stops switching because no current is delivered to the os-
cillator.
Figure 1. ROSC vs. Switching Frequency
DIGITAL TO ANALOG CONVERTER AND REFERENCE
The built-in digital to analog converter allows the adjustment of the output voltage from 0.8375V to
1.6000V with 12.5mV as shown in the previous table 1 automatically regulating VID* = VID - 25mV in order
to avoid any external component or circuitry to lower the regulated voltage meeting VRD10 specs. The
internal reference is trimmed to ensure the output voltage precision of ±0.5% and a zero temperature co-
efficient around 70°C. The internal reference voltage for the regulation is programmed by the voltage iden-
tification (VID) pins. These are inputs of an internal DAC that is realized by means of a series of resistors
providing a partition of the internal voltage reference. The VID code drives a multiplexer that selects a volt-
age on a precise point of the divider. The DAC output is delivered to an amplifier obtaining the VPROG volt-
age reference (i.e. the set-point of the error amplifier). Internal pull-ups are provided (realized with a 5
A
current generator up to 3V Typ); in this way, to program a logic "1" it is enough to leave the pin floating,
while to program a logic "0" it is enough to short the pin to GND. Programming the "11111x" code (VID5
doesn't matter), the device enters the NOCPU mode: all mosfets are turned OFF.
f
S
150 KHz
1.237
R
OSC
--------------- 6
kHz
A
-----------
150kHz
7.422 10
6
R
OSC K
()
-----------------------------
+
=
+
=
f
S
150 KHz
12 1.237
–
R
OS C
------------------------- 6
kHz
A
-----------
150 kHz
6.457 10
7
R
OSC K
()
-----------------------------
+
=
+
=
0
2000
4000
6000
8000
10000
12000
14000
25
50
75
100
125
150
Frequency (KHz)
Ro
s
c(
K
)v
s.
12V
0
100
200
300
400
500
600
700
800
150
250
350
450
550
650
Frequency (KHz)
Ro
sc(
K
)v
s
.G
N
D
相关PDF资料 |
PDF描述 |
|---|---|
| L6710TR | 2 A SWITCHING CONTROLLER, PQFP44 |
| L6713ATR | 2 A SWITCHING CONTROLLER, 225 kHz SWITCHING FREQ-MAX, PQFP64 |
| L6716TR | DUAL SWITCHING CONTROLLER, 225 kHz SWITCHING FREQ-MAX, QCC48 |
| L6716 | DUAL SWITCHING CONTROLLER, 225 kHz SWITCHING FREQ-MAX, QCC48 |
| L6722 | SWITCHING CONTROLLER, 300 kHz SWITCHING FREQ-MAX, QCC36 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| L6710TR | 功能描述:功率驱动器IC 6-Bit Dual Ph Contlr RoHS:否 制造商:Micrel 产品:MOSFET Gate Drivers 类型:Low Cost High or Low Side MOSFET Driver 上升时间: 下降时间: 电源电压-最大:30 V 电源电压-最小:2.75 V 电源电流: 最大功率耗散: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 封装:Tube |
| L6711 | 功能描述:DC/DC 开关控制器 3 PHASE CONTROLLER RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| L6711_06 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:3 Phase controller with dynamic VID and selectable DACs |
| L6711TR | 功能描述:DC/DC 开关控制器 3 PHASE CONTROLLER RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| L6712 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:TWO-PHASE INTERLEAVED DC/DC CONTROLLER |
发布紧急采购，3分钟左右您将得到回复。