- 您现在的位置：买卖IC网 > PDF目录30719 > LA4815M (SANYO SEMICONDUCTOR CO LTD) 0.62 W, 1 CHANNEL, AUDIO AMPLIFIER, PDSO8 PDF资料下载
参数资料
| 型号： | LA4815M |
| 厂商： | SANYO SEMICONDUCTOR CO LTD |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 0.62 W, 1 CHANNEL, AUDIO AMPLIFIER, PDSO8 |
| 封装： | 0.225 INCH, MFP-8 |
| 文件页数： | 13/14页 |
| 文件大小： | 233K |
| 代理商： | LA4815M |
LA4815M
5. Popping noise reduction during power-off
The power supply line can be directly controlled ON and OFF without using the mute function. However, when using
a high supply voltage, the shock noise and aftersound during power-off tends to worsen. One method of coping with
this is to connect a capacitor between Pin 6 (VCC) and Pin 7 (MUTE) as shown in Fig. 9 so that the auto mute function
operates during power-off.
Recommended value = 1
μF
+
Cmt
1
μF
CVCC
LA4815M
VCC
MUTE
6
7
Figure 9
6. Input coupling capacitor (Cin)
Cin is an input coupling capacitor, and is used for DC cutting. However, this capacitor is also used to improve the ripple
rejection ratio, which changes according to the capacitance value (recommended value = 1
μF). In addition, this
capacitor also affects the transient response characteristics during power-on and when mute is canceled, so the constant
should be set in consideration of these characteristics.
Design reference value = approximately 0.33 to 3.3
μF
Ripple rejection ratio : Increasing the capacitance value increases the rate, and reducing the value reduces the rate.
Rise response speed : Increasing the capacitance value reduces the speed, and reducing the value increases the
speed.
Popping noise : Increasing the capacitance value reduces the noise, and reducing the value increases the noise.
7. Output coupling capacitor (Cout)
Cout is an output coupling capacitor used for DC cutting. However, this capacitor, Cout, in combination with load
impedance RL forms a high-pass filter and attenuates the low frequency signal. Take into account the cutoff frequency
when determining the capacitance value. In addition, normally a chemical capacitor is used for this capacitor, but the
capacitance value of chemical capacitors decreases at low temperatures, so the value should be set in accordance with
this characteristic.
The cutoff frequency is expressed by the following formula.
fc = 1/(2
π × RL × Cout)
8. Output phase compensation capacitor (Cosc)
The Cosc capacitor is used to prevent output oscillation. Use a ceramic capacitor (recommended value = 0.1
μF) with
good high frequency characteristics, and locate this capacitor as close to the IC as possible.
9. Power supply capacitor (CVCC)
The CVCC capacitor is used to suppress the ripple component of the power supply line. Normally a chemical capacitor
(recommended value = 10
μF) is used for this capacitor. However, chemical capacitors have poor high frequency
characteristics, so when using a CPU, DSP or other IC that generates digital noise in the set, it is recommended that a
power supply bypass capacitor (ceramic capacitor, recommended value = approximately 0.1
μF) be added to reject
high-frequency components. Locate this bypass capacitor as close to the IC as possible.
No.A1373-8/14
相关PDF资料 |
PDF描述 |
|---|---|
| LA4815 | 5 W, 2 CHANNEL, AUDIO AMPLIFIER, DIP28 |
| LA4815 | 5 W, 2 CHANNEL, AUDIO AMPLIFIER, DIP28 |
| LA4820M | 0.12 W, 2 CHANNEL, AUDIO AMPLIFIER, PDSO24 |
| LA4901 | 10 W, 1 CHANNEL, AUDIO AMPLIFIER, DIP28 |
| LA4902 | 10 W, 1 CHANNEL, AUDIO AMPLIFIER, DIP28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LA4815M_10 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monaural Power Amplifier |
| LA4815M-TLM-H | 功能描述:功率放大器 MONAURAL POWER AMPLIFIER RoHS:否 制造商:TriQuint Semiconductor 封装 / 箱体: 工作电源电压:28 V 电源电流:2.5 A 工作温度范围: 封装: |
| LA4815VH | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monaural Power Amplifier |
| LA4815VH_12 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Monaural Power Amplifier |
| LA4815VH-MPB-H | 功能描述:音频放大器 RoHS:否 制造商:STMicroelectronics 产品:General Purpose Audio Amplifiers 输出类型:Digital 输出功率: THD + 噪声: 工作电源电压:3.3 V 电源电流: 最大功率耗散: 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:TQFP-64 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。