- 您现在的位置：买卖IC网 > PDF目录19049 > LF10BP-T01 (Hirose Electric Co Ltd)TOOL JIG ASSEM FOR LF10 PLUG PDF资料下载
参数资料
| 型号： | LF10BP-T01 |
| 厂商： | Hirose Electric Co Ltd |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | TOOL JIG ASSEM FOR LF10 PLUG |
| 产品培训模块： | HRS Waterproof Connector LF Waterproof Metal Circular Connector |
| 标准包装： | 1 |
| 系列： | LF10 |
| 附件类型： | 夹具组件 |
| 产品目录页面： | 413 (CN2011-ZH PDF) |
| 其它名称： | *LF10BP-T01 H9911 |
LF Series q this catalog is reference only. Please
The product information Miniature Waterproof Shielded Connectors request the Engineering Drawing for the most current and accurate design information.
No.
Illustration
Operation
5
5
Forming cavity
Crimping tool
5
Both sides of the shielding clamp must be
placed in the forming cavity of the tool
(as shown on the illustration) and crimped
over the cable by closing the tool completely.
Crimping tool Forming cavity
Applicable cable
diameter
Shielding clamp
diameter after crimping
HR10A-TC-02
LF-TC-01
5.3
7.0
7.9
9.1
5mm
–––
7.3mm
8.7mm
5.3mm to
5.5mm
–––
7.9mm to
8.1mm
9.1mm to
9.3mm
6
1
,
2
Threaded section
Backshell
Connector Assembly
1 Place the body/insulator assembly in the
applicable solder termination fixture.
For plug assembly
Fixture Part No.
LF07BP-T01
LF10BP-T01
LF13BP-T01
For jack assembly
Fixture Part No.
LF07BJ-T01
LF10BJ-T01
LF13BJ-T01
Applicable connector
LF07WBP-6S,6P,3S,3P
LF10WBP-4S,4P,12S,12P
LF13WBP-20S,20P,11S,11P
Applicable connector
LF07WBJ-6S,6P,3S,3P
LF10WBJ-4S,4P,12S,12P
LF13WBJ-20S,20P,11S,11P
Wrench width : D
2
Coat the thread section of the body/insulator
assembly with Loctite 271 compound
Table 6 (Recommend tightening torgue)
Shell size Tightening torque Wrench width
LF07 1N·m~1.5N·m 10mm
LF10 1N·m~1.5N·m 13mm
(manufactured by Henckel Japan, Ltd.) or
equivalent, tightening it with a torque
specified in the table 6.
Note
It is critical that the cable itself will not turn or
LF13
1.5N·m~2N·m
16mm
twist during this operation.
It may cause breakage at the soldered area.
3
,
4
Seal bushing
3
Slide forward the seal bushing and insert it in
the backshell until fully seated.
Strain relief collar
4
Slide forward the strain relief collar and insert
it in the backshell, making sure that the
opposing protrusions fit inside the
corresponding grooves, as shown on the
illustration.
Groove
Protrusion
Tightening collar
Note
It is critical that the protrusions are inside the
corresponding grooves.
It may cause breakage, when a tightening collar is assembled.
5
Threaded section
Tightening collar
5
Verify that the Locktite 7649 primer
(or equivalent) on the threaded sections of the
backshell and tightening collar are dry.
Apply the Locktite 271 compound to the
tightening collar’s threaded section and attach
it to the backshell.
12
相关PDF资料 |
PDF描述 |
|---|---|
| LF07BP-T01 | TOOL JIG ASSEM FOR LF07 PLUG |
| A3C-3004 | TIGHTENING TOOL |
| 140-0000-958 | TOOL BODY SOLDERING FOR .086 |
| 164TL5 | SWITCH UNIT ALT ILLUM RECT |
| 164SL5 | SWITCH UNIT ALT ILLUM SQ |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LF10C32C1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1.2mm 2 Pin Ceramic Surface Mount Crystal |
| LF10C32E1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1.2mm 2 Pin Ceramic Surface Mount Crystal |
| LF10C32F1 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:1.2mm 2 Pin Ceramic Surface Mount Crystal |
| LF10C8 | 制造商:Pulse 功能描述:TRANSFORMERS - Rail/Tube |
| LF10C9 | 制造商:Pulse Electronics Corporation 功能描述:TRANSFORMERS - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。