- 您现在的位置：买卖IC网 > PDF目录98000 > LIS1R02 (STMICROELECTRONICS) SPECIALTY ANALOG CIRCUIT, PDSO24 PDF资料下载
参数资料
| 型号： | LIS1R02 |
| 厂商： | STMICROELECTRONICS |
| 元件分类： | 模拟信号调理 |
| 英文描述： | SPECIALTY ANALOG CIRCUIT, PDSO24 |
| 封装： | SO-24 |
| 文件页数： | 8/11页 |
| 文件大小： | 81K |
| 代理商： | LIS1R02 |
LIS1R02 (L6671)
6/11
The FIFO has four registers grouped into two banks. The first bank consists of the first and the second register.
The first register is the one written first since the last read. The second bank consists of the third and fourth
register.
0000: address for the first bank
0010: address for the second bank
The device puts out first the data of the first register of the bank with the MSB first.
2.0 LIS1R02 REGISTERS
The registers are grouped into two banks. The following table summarizes their mapping.
2.1 Registers Bank 0
AD(3:0) = 0100 CTRL_Reg1
This is the first control register. It has 8 bit whose function is summarized below.
Note: x means don't care value.
Note: default value after Power On Reset is 0100 0000
1xxx xxxx Chip in Power Down mode
xx00 xxxx Clock from CLK pin
xx01 xxxx Clock derived from the internal oscillator
xx10 xxxx Clock from the PLL locking on CLK_in
xx11 xxxx Clock from the PLL locking on FIFO_Low reading
xxxx 1xxx Internal Oscillator in Power Down mode
Address
Reg. Bank 0
Reg. Bank 1
0000
FIFO_Low
0001
not used
0010
FIFO_High
0011
not used
0100
CTRL_Reg1
0101
CTRL_Reg2
0110
PLL_PRESC_MULT
FLASH_Reg1
0111
PLL_MULT
FLASH_Reg2
1000
IIR_A0
GAIN_Low
1001
IIR_A1
GAIN_High
1010
IIR_A2
OFFSET_Low
1011
IIR_B1
OFFSET_High
1100
IIR_B2
CURR_BANDGAP
1101
IIR_SIGN_BIT
BAND_CSACT_Reg
1110
DSC_Reg
CS_TRIM
1111
MISC_Reg
相关PDF资料 |
PDF描述 |
|---|---|
| LIS35DE | SPECIALTY ANALOG CIRCUIT, PBGA14 |
| LIS35DETR | SPECIALTY ANALOG CIRCUIT, PBGA14 |
| LIS3L02AQ3TR | SPECIALTY ANALOG CIRCUIT, PQCC44 |
| LIS3L02AQ3 | SPECIALTY ANALOG CIRCUIT, PQCC44 |
| LIS3L06AL | SPECIALTY ANALOG CIRCUIT, PBGA8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LIS202DL | 功能描述:加速计 - 板上安装 ULTRA LOW POWER 2 AXES LIN/ACCELEROMTR RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| LIS202DLTR | 功能描述:加速计 - 板上安装 ULTRA COMPACT LOW POWER 2 AXES LIN A RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| LIS244AL | 功能描述:加速计 - 板上安装 MEMS MOTION SENSOR 2-AXIS RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| LIS244ALH | 功能描述:加速计 - 板上安装 MEMS Inertial High Pef 2-Axis RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
| LIS244ALHTR | 功能描述:加速计 - 板上安装 MEMS Inertial High Pef 2-Axis RoHS:否 制造商:Murata 传感轴:Double 加速:12 g 灵敏度: 封装 / 箱体: 输出类型:Analog 数字输出 - 位数:11 bit 电源电压-最大:5.25 V 电源电压-最小:4.75 V 电源电流:4 mA 最大工作温度:+ 125 C 最小工作温度:- 40 C |
发布紧急采购，3分钟左右您将得到回复。