- 您现在的位置：买卖IC网 > PDF目录30743 > LM1267NA/NOPB (NATIONAL SEMICONDUCTOR CORP) 3 CHANNEL, VIDEO PREAMPLIFIER, PDIP24 PDF资料下载
参数资料
| 型号： | LM1267NA/NOPB |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 音频／视频放大 |
| 英文描述： | 3 CHANNEL, VIDEO PREAMPLIFIER, PDIP24 |
| 封装： | PLASTIC, DIP-24 |
| 文件页数： | 16/20页 |
| 文件大小： | 1702K |
| 代理商： | LM1267NA/NOPB |
External Interface Signals Electrical Characteristics (Continued)
Note 3: All voltages are measured with respect to GND, unless otherwise specified.
Note 4: Human body model, 100 pF discharged through a 1.5 k
resistor.
Note 5: Machine Model ESD test is covered by specification EIAJ IC-121-1981. A 200 pF cap is charged to the specified voltage, then discharged directly into the
IC with no external series resistor (resistance of discharge path must be under 50
).
Note 6: Typical specifications are specified at +25C and represent the most likely parametric norm.
Note 7: Tested limits are guaranteed to National’s AOQL (Average Outgoing Quality Level).
Note 8: The supply current specified is the quiescent current for VCC with RL = ∞. Load resistors are not required and are not used in the test circuit, therefore all
the supply current is used by the pre-amp.
Note 9: Linearity Error is the variation in step height of a 16 step staircase input signal waveform with 0.7 VP-P level at the input, subdivided into 16 equal steps,
with each step approximately 100 ns in width.
Note 10: Input from signal generator: tr,tf < 1 ns. Scope and generator response used for testing: tr = 1.1 ns, tf = 0.9 ns. Using the RSS technique the scope and
generator response have been removed from the output rise and fall times.
Note 11:
AV track is a measure of the ability of any two amplifiers to track each other and quantifies the matching of the three gain stages. It is the difference in
gain change between any two amplifiers with the contrast set to AV 12 and measured relative to the AV max condition. For example, at AV max the three amplifiers’
gains might be 12.1 dB, 11.9 dB, and 11.8 dB and change to 2.2 dB, 1.9 dB and 1.7 dB respectively for contrast set to AV 12. This yields a typical gain change of
10.0 dB with a tracking change of ±0.2 dB.
Note 12: ABL should provide smooth decrease in gain over the operational range of 0 dB to –6 dB
A
ABL = A(VABL =VABL Max Gain) A(VABL =VABL Min Gain)
Beyond –6 dB the gain characteristics, linearity, pulse response, and/or behavior may depart from normal values.
Note 13: Adjust input frequency from 10 MHz (AV max reference level) to the 3 dB corner frequency (f3 dB).
Note 14: Measure output levels of the other two undriven amplifiers relative to the driven amplifier to determine channel separation. Terminate the undriven amplifier
inputs to simulate generator loading. Repeat test at fIN = 10 MHz for Vsep 10 MHz.
Note 15: A minimum pulse width of 200 ns is guaranteed for a horizontal line of 15 kHz. This limit is guaranteed by design. If a lower line rate is used then a longer
clamp pulse may be required.
Note 16: The video black level is used for this test. OSD amplitude is measured from the video black level to the OSD white level.
Note 17: Limits met by matching the external resistor going to pin 24 to the H Flyback voltage.
Typical Performance Characteristics V
CC =5V, TA = 25 unless otherwise specified.
Gain Attenuation
DS200050-2
Contrast Attenuation
DS200050-3
ABL Attenuation
DS200050-4
Output Waveform
DS200050-5
LM1267
www.national.com
5
相关PDF资料 |
PDF描述 |
|---|---|
| LM1269NA/NOPB | 3 CHANNEL, VIDEO PREAMPLIFIER, PDIP24 |
| LM1276AAA/NA | 1 CHANNEL, VIDEO PREAMPLIFIER, PDIP28 |
| LM1279AN/NOPB | 3 CHANNEL, VIDEO AMPLIFIER, PDIP20 |
| LM1279N/NOPB | 1 CHANNEL, VIDEO AMPLIFIER, PDIP20 |
| LM136A-2.5MD8 | 1-OUTPUT TWO TERM VOLTAGE REFERENCE, 5 V, UUC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM1269 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:110 MHz I2C Compatible RGB Video Amplifier System with OSD & DACs |
| LM1269DNA | 制造商:Texas Instruments 功能描述: |
| LM1269DNA/NOPB | 功能描述:IC PREAMP CMOS 110MHZ 24-DIP RoHS:是 类别:集成电路 (IC) >> 线性 - 视频处理 系列:- 产品变化通告:Product Discontinuation 07/Mar/2011 标准包装:3,000 系列:OMNITUNE™ 类型:调谐器 应用:移动电话，手机，视频显示器 安装类型:表面贴装 封装/外壳:65-WFBGA 供应商设备封装:PG-WFSGA-65 包装:带卷 (TR) 其它名称:SP000365064 |
| LM1269NA | 制造商:Texas Instruments 功能描述:Video Amplifiers 制造商:Texas Instruments 功能描述:-LIFETIME BUYS TIL 05/12 |
| LM1269NA/NOPB | 功能描述:视频放大器 RoHS:否 制造商:ON Semiconductor 通道数量:4 电源类型: 工作电源电压:3.3 V, 5 V 电源电流: 最小工作温度: 最大工作温度: 封装 / 箱体:TSSOP-14 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。