参数资料
型号: LM12H458CIVX
厂商: NATIONAL SEMICONDUCTOR CORP
元件分类: 模拟信号调理
英文描述: SPECIALTY ANALOG CIRCUIT, PQCC44
封装: PLASTIC, LCC-44
文件页数: 1/36页
文件大小: 1195K
代理商: LM12H458CIVX
LM12454/LM12458/LM12H458
12-Bit + Sign Data Acquisition System with
Self-Calibration
General Description
The LM12458, and LM12H458 are highly integrated Data
Acquisition Systems. Operating on just 5V, they combine a
fully-differential self-calibrating (correcting linearity and zero
errors) 13-bit (12-bit + sign) analog-to-digital converter
(ADC) and sample-and-hold (S/H) with extensive analog
functions and digital functionality. Up to 32 consecutive con-
versions, using two’s complement format, can be stored in
an internal 32-word (16-bit wide) FIFO data buffer. An inter-
nal 8-word RAM can store the conversion sequence for up to
eight acquisitions through the LM12(H)458’s eight-input mul-
tiplexer. The obsolete LM12454 has a four-channel multi-
plexer, a differential multiplexer output, and a differential S/H
input. The LM12(H)458 can also operate with 8-bit + sign
resolution and in a supervisory “watchdog” mode that com-
pares an input signal against two programmable limits.
Programmable acquisition times and conversion rates are
possible through the use of internal clock-driven timers. The
reference voltage input can be externally generated for ab-
solute or ratiometric operation or can be derived using the
internal 2.5V bandgap reference.
All registers, RAM, and FIFO are directly addressable
through the high speed microprocessor interface to either an
8-bit or 16-bit data bus. The LM12(H)458 includes a direct
memory access (DMA) interface for high-speed conversion
data transfer.
Additional applications information can be found in applica-
tions notes AN-906, AN-947 and AN-949.
Key Specifications
(f
CLK = 5 MHz; 8 MHz, H)
j
Resolution
12-bit + sign or 8-bit + sign
j
13-bit conversion time
8.8 s, 5.5 s (H) (max)
j
9-bit conversion time
4.2 s, 2.6 s (H) (max)
j
13-bit Through-put rate
88k samples/s (min),
140k samples/s (H) (min)
j
Comparison time
(“watchdog” mode)
2.2 s (max),
1.4 s (H) (max)
j
ILE
±1 LSB (max)
j
V
IN range
GND to V
A
+
j
Power Consumption
30 mW, 34 mW (H) (max)
j
Stand-by mode
50 W (typ)
j
Single supply
3V to 5.5V
Features
n
Three operating modes: 12-bit + sign, 8-bit + sign, and
“watchdog”
n
Single-ended or differential inputs
n
Built-in Sample-and-Hold and 2.5V bandgap reference
n
Instruction RAM and event sequencer
n
8-channel multiplexer
n
32-word conversion FIFO
n
Programmable acquisition times and conversion rates
n
Self-calibration and diagnostic mode
n
8- or 16-bit wide data bus microprocessor or DSP
interface
Applications
n
Data Logging
n
Instrumentation
n
Process Control
n
Energy Management
n
Inertial Guidance
TRI-STATE is a registered trademark of National Semiconductor Corporation.
AT is a registered trademark of International Business Machines Corporation.
February 2006
LM12454/LM12458/LM12H458
12-Bit
+
Sign
Data
Acquisition
System
with
Self-Calibration
2006 National Semiconductor Corporation
DS011264
www.national.com
相关PDF资料
PDF描述
LM1301-7EPD9AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1501-7RD6AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1601-7RD0AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1901-7PD8AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
LM1901-9RD1AFU 1-OUTPUT AC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LM12H458CIVX/NOPB 功能描述:IC ACQUISITION SYS 12BIT 44-PLCC RoHS:是 类别:集成电路 (IC) >> 数据采集 - ADCs/DAC - 专用型 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:数据采集系统(DAS) 分辨率(位):16 b 采样率(每秒):21.94k 数据接口:MICROWIRE?,QSPI?,串行,SPI? 电压电源:模拟和数字 电源电压:1.8 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP(6x6) 包装:托盘
LM12H458CMEL/883 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Ended Data Acquisition System
LM12H458MEL/883 制造商:NSC 制造商全称:National Semiconductor 功能描述:12-Bit Sign Data Acquisition System with Self-Calibration
LM12H458MW/883 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Ended Data Acquisition System
LM12L438CIV 制造商:NSC 制造商全称:National Semiconductor 功能描述:Sign Data Acquisition System with Serial I/O and Self-Calibration