- 您现在的位置：买卖IC网 > PDF目录44550 > LM2677SDX-12/NOPB (NATIONAL SEMICONDUCTOR CORP) 8.75 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 PDF资料下载
参数资料
| 型号： | LM2677SDX-12/NOPB |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 稳压器 |
| 英文描述： | 8.75 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| 封装： | LLP-14 |
| 文件页数： | 3/26页 |
| 文件大小： | 677K |
| 代理商： | LM2677SDX-12/NOPB |
DESIGN CONSIDERATIONS
10130107
FIGURE 1. Basic circuit for fixed output voltage applications.
10130108
FIGURE 2. Basic circuit for adjustable output voltage applications
Power supply design using the LM2677 is greatly simplified
by using recommended external components. A wide range
of inductors, capacitors and Schottky diodes from several
manufacturers have been evaluated for use in designs that
cover the full range of capabilities (input voltage, output volt-
age and load current) of the LM2677. A simple design proce-
dure using nomographs and component tables provided in
this data sheet leads to a working design with very little effort.
Alternatively, the design software, LM267X Made Simple
(version 6.0), can also be used to provide instant component
selection, circuit performance calculations for evaluation, a
bill of materials component list and a circuit schematic.
The individual components from the various manufacturers
called out for use are still just a small sample of the vast array
of components available in the industry. While these compo-
nents are recommended, they are not exclusively the only
components for use in a design. After a close comparison of
component specifications, equivalent devices from other
manufacturers could be substituted for use in an application.
Important considerations for each external component and an
explanation of how the nomographs and selection tables were
developed follows.
INDUCTOR
The inductor is the key component in a switching regulator.
For efficiency the inductor stores energy during the switch ON
time and then transfers energy to the load while the switch is
OFF.
Nomographs are used to select the inductance value required
for a given set of operating conditions. The nomographs as-
sume that the circuit is operating in continuous mode (the
current flowing through the inductor never falls to zero). The
magnitude of inductance is selected to maintain a maximum
ripple current of 30% of the maximum load current. If the ripple
current exceeds this 30% limit the next larger value is select-
ed.
11
www.national.com
LM2677
相关PDF资料 |
PDF描述 |
|---|---|
| LM2679LD-ADJ | 8.1 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2679LDX-3.3 | 8.1 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2679LDX-12 | 8.1 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2679LDX-5.0 | 8.1 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
| LM2679SDX-5.0/NOPB | 8.1 A SWITCHING REGULATOR, 280 kHz SWITCHING FREQ-MAX, DSO14 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM2677SDX-3.3 | 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| LM2677SDX-3.3/NOPB | 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| LM2677SDX-5.0 | 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| LM2677SDX-5.0/NOPB | 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| LM2677SDX-ADJ | 功能描述:直流/直流开关转换器 RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
发布紧急采购，3分钟左右您将得到回复。