- 您现在的位置：买卖IC网 > PDF目录178070 > LM99 (National Semiconductor Corporation) 【1C Accurate, High Temperature, Remote Diode Temperature Sensor with Two-Wire Interface PDF资料下载
参数资料
| 型号： | LM99 |
| 厂商： | National Semiconductor Corporation |
| 元件分类： | 温度/湿度传感器 |
| 英文描述： | 【1C Accurate, High Temperature, Remote Diode Temperature Sensor with Two-Wire Interface |
| 中文描述： | 【集成电路准确，高温，远程二极管温度传感器，两线接口 |
| 文件页数： | 3/20页 |
| 文件大小： | 349K |
| 代理商： | LM99 |
1.0 Functional Description (Continued)
1.9 COMMUNICATING WITH THE LM99
The data registers in the LM99 are selected by the Com-
mand Register. At power-up the Command Register is set to
“00”, the location for the Read Local Temperature Register.
The Command Register latches the last location it was set
to. Each data register in the LM99 falls into one of four types
of user accessibility:
1.
Read only
2.
Write only
3.
Read/Write same address
4.
Read/Write different address
A Write to the LM99 will always include the address byte and
the command byte. A write to any register requires one data
byte.
Reading the LM99 can take place either of two ways:
1.
If the location latched in the Command Register is cor-
rect (most of the time it is expected that the Command
Register will point to one of the Read Temperature Reg-
isters because that will be the data most frequently read
from the LM99), then the read can simply consist of an
address byte, followed by retrieving the data byte.
2.
If the Command Register needs to be set, then an
address byte, command byte, repeat start, and another
address byte will accomplish a read.
The data byte has the most significant bit first. At the end of
a read, the LM99 can accept either Acknowledge or No
Acknowledge from the Master (No Acknowledge is typically
used as a signal for the slave that the Master has read its
last byte). It takes the LM99 31.25 ms to measure the
temperature of the remote diode and internal diode. When
retrieving all 10 bits from a previous remote diode tempera-
ture measurement, the master must insure that all 10 bits are
from the same temperature conversion. This may be
achieved by using one-shot mode or by setting the conver-
sion rate and monitoring the busy bit such that no conversion
occurs in between reading the MSB and LSB of the last
temperature conversion.
LM99
www.national.com
11
相关PDF资料 |
PDF描述 |
|---|---|
| LMF/1/40209/522 | 12 CONTACT(S), BRASS, FEMALE, CIRCULAR CONNECTOR, SOCKET |
| LMF/1/40209/523 | 12 CONTACT(S), BRASS, FEMALE, CIRCULAR CONNECTOR, SOCKET |
| LMF/1/40209/524 | 12 CONTACT(S), BRASS, FEMALE, CIRCULAR CONNECTOR, SOCKET |
| LMF/1/40209/525 | 12 CONTACT(S), BRASS, FEMALE, CIRCULAR CONNECTOR, SOCKET |
| LMF/1/40210/520 | 4 CONTACT(S), BRASS, FEMALE, CIRCULAR CONNECTOR, SOCKET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LM99-1CIMM | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| LM99-1CIMM/NOPB | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| LM99-1CIMMX | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| LM99-1CIMMX/NOPB | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| LM99-1EVAL | 功能描述:BOARD EVALUATION LM99-1 RoHS:否 类别:编程器，开发系统 >> 评估板 - 传感器 系列:PowerWise® 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- |
发布紧急采购，3分钟左右您将得到回复。