- 您现在的位置：买卖IC网 > PDF目录44717 > LP3946ILD (NATIONAL SEMICONDUCTOR CORP) 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14 PDF资料下载
参数资料
| 型号： | LP3946ILD |
| 厂商： | NATIONAL SEMICONDUCTOR CORP |
| 元件分类： | 电源管理 |
| 英文描述： | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO14 |
| 文件页数： | 4/15页 |
| 文件大小： | 337K |
| 代理商： | LP3946ILD |
Application Notes (Continued)
BIPB PIN
BIPB pin is used to select between charger mode and LDO
mode. It is pulled HIGH internally to the CHG-IN pin, which is
the LDO mode. To select charger mode, this pin must be
connected to ground directly or pulled to ground via the
battery pack ID resistor. In the latter case, BIPB pin pulled
LOW confirms battery connection. Alternatively, this pin can
be pulled to LOW by the system micro-controller for added
flexibility.
LDO MODE
The charger is in the LDO mode when the BIPB pin is left
open or HIGH. This mode of operation is used primarily
during system level testing of the handset to eliminate the
need for battery insertion. CAUTION: battery may be dam-
aged if device is operating in LDO mode with battery con-
nected.
The internal power FET provides up to 1.2 amp of current at
BATT pin in this mode. The LDO output is set to 4.1V. When
operating at higher output currents, care must be taken not
to exceed the package power dissipation rating. See “Ther-
mal Performance of LLP Package” section for more detail.
EN PIN
The Enable pin is used to enable/disable the charger, in both
The Enable pin is internally pulled HIGH to the CHG-IN pin.
When the charger is disabled, it draws less than 4 A of
current.
5.6 HR SAFETY TIMER IN CHARGER MODE
Both LP3945 and LP3946 have built-in 5.6 hr back up safety
timer to prevent over-charging a Li Ion battery. The 5.6 hr
timer starts counting when the charger enters constant cur-
rent mode. It will turn the charger off when the 5.6 hr timer is
up while the charger is still in constant current mode. In this
case, both LEDs will turn on, indicating a fault condition.
In order for the 5.6 hr safety timer to function in the LP3945,
pin 13 should be left floating. CAUTION: disabling the back
up safety timer could create unsafe charging conditions. If
disabled, user must provide external protection to prevent
overcharging the battery.
StopModeEN PIN
To provide the flexibility of using an external back up timer,
StopModeEN allows “bypassing” of the 5.6 hr safety timer. It
is achieved by pulling pin 13 on the LP3945 to LOW. As
indicated in the LP3945 Flow Chart, this feature works only
in constant current mode with a Li Ion battery. Therefore, if a
Li Ion battery is in constant current mode and the 5.6 hr timer
times out, instead of the charger being turned off, it proceeds
to maintenance mode.
This is not a recommended mode of operation. Disabling the
5.6 hr timer can potentially expose the battery to prolong
charge cycle and damage the battery. If StopModeEn feature
is used, user must protect the battery from exposure to
prolong charge cycle. For normal operation, pin 13 should be
left floating.
20066515
FIGURE 5. Power Up Timing Diagram in Charger Mode (BIPB = LOW)
20066516
FIGURE 6. Power Up Timing Diagram in LDO Mode (BIPB = HIGH)
LP3945/LP3946
www.national.com
12
相关PDF资料 |
PDF描述 |
|---|---|
| LP3972SQXA413 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, QCC40 |
| LP3972SQX-5810 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, QCC40 |
| LP3972SQXA514 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, QCC40 |
| LP3972SQ-5810 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, QCC40 |
| LP3972SQXE514 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, QCC40 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LP3946ILDX | 制造商:NSC 制造商全称:National Semiconductor 功能描述:Battery Charge Management System |
| LP3946LD | 制造商:Rochester Electronics LLC 功能描述:STANDALONE CC/CV LIION BATTERY - Bulk |
| LP3946LD/NOPB | 功能描述:IC MANAGEMENT BATT CHARGE 14-LLP RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 标准包装:1 系列:- 功能:充电管理 电池化学:锂离子（Li-Ion）、锂聚合物（Li-Pol） 电源电压:3.75 V ~ 6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SC-74A，SOT-753 供应商设备封装:SOT-23-5 包装:剪切带 (CT) 产品目录页面:669 (CN2011-ZH PDF) 其它名称:MCP73831T-2ACI/OTCT |
| LP3947 | 制造商:NSC 制造商全称:National Semiconductor 功能描述:USB/AC Adaptor, Single Cell Li-Ion Battery Charger IC |
| LP3947ISD-09 | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。