参数资料
型号: LPC2103FHN48H/6,51
厂商: NXP Semiconductors
文件页数: 5/37页
文件大小: 0K
描述: IC ARM7 MCU FLASH 32K 48HVQFN
标准包装: 4,000
系列: LPC2100
核心处理器: ARM7
芯体尺寸: 16/32-位
速度: 70MHz
连通性: I²C,Microwire,SPI,SSI,SSP,UART/USART
外围设备: POR,PWM,WDT
输入/输出数: 32
程序存储器容量: 32KB(32K x 8)
程序存储器类型: 闪存
RAM 容量: 8K x 8
电压 - 电源 (Vcc/Vdd): 1.65 V ~ 3.6 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 48-VFQFN 裸露焊盘
包装: 带卷 (TR)
LPC2101_02_03_4
NXP B.V. 2009. All rights reserved.
Product data sheet
Rev. 04 — 2 June 2009
13 of 37
NXP Semiconductors
LPC2101/02/03
Single-chip 16-bit/32-bit microcontrollers
6.7 Fast general purpose parallel I/O
Device pins that are not connected to a specic peripheral function are controlled by the
GPIO registers. Pins may be dynamically congured as inputs or outputs. Separate
registers allow setting or clearing any number of outputs simultaneously. The value of the
output register may be read back, as well as the current state of the port pins.
LPC2101/02/03 introduce accelerated GPIO functions over prior LPC2000 devices:
GPIO registers are relocated to the ARM local bus for the fastest possible I/O timing.
Mask registers allow treating sets of port bits as a group, leaving other bits
unchanged.
All GPIO registers are byte addressable.
Entire port value can be written in one instruction.
6.7.1 Features
Bit-level set and clear registers allow a single instruction set or clear of any number of
bits in one port.
Direction control of individual bits.
Separate control of output set and clear.
All I/O default to inputs after reset.
6.8 10-bit ADC
The LPC2101/02/03 contain one ADC. It is a single 10-bit successive approximation ADC
with eight channels.
6.8.1 Features
Measurement range of 0 V to 3.3 V.
Each converter capable of performing more than 400,000 10-bit samples per second.
Burst conversion mode for single or multiple inputs.
Optional conversion on transition on input pin or Timer Match signal.
Every analog input has a dedicated result register to reduce interrupt overhead.
6.9 UARTs
The LPC2101/02/03 each contain two UARTs. In addition to standard transmit and
receive data lines, UART1 also provides a full modem control handshake interface.
Compared to previous LPC2000 microcontrollers, UARTs in LPC2101/02/03 include a
fractional baud rate generator for both UARTs. Standard baud rates such as 115200 can
be achieved with any crystal frequency above 2 MHz.
6.9.1 Features
16 byte Receive and Transmit FIFOs.
Register locations conform to 16C550 industry standard.
Receiver FIFO trigger points at 1, 4, 8, and 14 bytes
相关PDF资料
PDF描述
VI-212-IY-F4 CONVERTER MOD DC/DC 15V 50W
VI-B6N-IW-F1 CONVERTER MOD DC/DC 18.5V 100W
VI-B6L-IX-F4 CONVERTER MOD DC/DC 28V 75W
VI-212-IY-F2 CONVERTER MOD DC/DC 15V 50W
VI-B6L-IX-F2 CONVERTER MOD DC/DC 28V 75W
相关代理商/技术参数
参数描述
LPC2104 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:Single-chip 32-bit microcontrollers; 128 kB ISP/IAP Flash with 64 kB/32 kB/16 kB RAM
LPC2104BBD48 制造商:NXP Semiconductors 功能描述:
LPC2104BBD48,151 功能描述:ARM微控制器 - MCU ARM7 128KF/16KR/I2C RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
LPC2104BBD48.151 制造商:NXP Semiconductors 功能描述:IC SM 32 BIT MCU WAFFLE125 制造商:NXP Semiconductors 功能描述:32BIT MCU 128K FLASH SMD LPC2104
LPC2104BBD48.151 制造商:NXP Semiconductors 功能描述:IC 32BIT MCU 128K FLASH SMD 2104