
co0102tr01_reli-RP1
co0102tr01_reli_e-01
■ RELIABILITY DATA
*This catalog contains the typical specication only due to the limitation of space. When you consider the purchase of our products, please check our specication.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
1. Operating Temperature Range
CM01
ー40℃~+105℃
CM04RC
ー25℃~+105℃
BU05MC
【Test Method and Remarks】
Including self-generated heat
3. Rated current
CM01
Within the specied tolerance.
CM04RC
BU05MC
【Test Method and Remarks】
The maximum value of DC current within a specied rise of temperature individually.
4. Impedance
CM01
Within the specied tolerance.
CM04RC
BU05MC
【Test Method and Remarks】
Measuring equipment : HP 4291A or its equivalent
Measuring frequency : Specied frequency
5. DC Resisitance
CM01
Within the specied tolerance.
CM04RC
BU05MC
【Test Method and Remarks】
SMD transformer·Commom mode choke coil :
Measuring equipment : DC ohm meter
2. Storage Temperature Range
CM01
ー40℃~+85℃
CM04RC
BU05MC
【Test Method and Remarks】
ー5 to +40℃ in taped packaging
7. Dielectric resistance : between wires
CM01
100MΩ min.
CM04RC
BU05MC
【Test Method and Remarks】
Applied voltage : Rated voltage
Duration
: 60 sec.
8. Rated voltage
CM01
Within the specication.
CM04RC
BU05MC
6. Resistance to exure of substrate
CM01
Within the specied tolerance.
CM04RC
Refer to the individual specication.
BU05MC
【Test Method and Remarks】
According to JIS C 0051
CM01
CM04RC·BU05MC
Warp
2mm
3mm
Pressing speed
0.5mm/sec.
Duration
5±1sec.
9. Withstanding voltage : between wires
CM01
No abnormality.
CM04RC
BU05MC
【Test Method and Remarks】
Applied voltage : Regulation voltage, DC250V(CM04RC),DC125V(BU05MC)
Duration
: 60 sec.
10. Resistance to vibration
CM01
No abnormality observed in appearance
CM04RC
Refer to the individual specication.
BU05MC
【Test Method and Remarks】
According to JIS C 0040
Directions
: 2 hrs each in X, Y, and Z directions. Total : 6 hrs
Frequency range : 10 to 55 to 10 Hz (1 min.)
Amplitude
: 1.5mm (Shall not exceed acceleration 196m/s2)
Mounting method : soldering onto printed board
Recovery
: At least 2 hrs of recovery under the standard condition after the test,followed by the measurement within 48 hrs.