- 您现在的位置：买卖IC网 > PDF目录2154 > LT1223CS8#TRPBF (Linear Technology)IC CURRNT FEEDBK AMP100MHZ 8SOIC PDF资料下载
参数资料
| 型号： | LT1223CS8#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 16/16页 |
| 文件大小： | 0K |
| 描述： | IC CURRNT FEEDBK AMP100MHZ 8SOIC |
| 标准包装： | 2,500 |
| 放大器类型： | 电流反馈 |
| 电路数： | 1 |
| 转换速率： | 1300 V/µs |
| -3db带宽： | 100MHz |
| 电流 - 输入偏压： | 1µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 6mA |
| 电流 - 输出 / 通道： | 60mA |
| 电压 - 电源，单路/双路(±)： | 8 V ~ 36 V，±4 V ~ 18 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SO |
| 包装： | 带卷 (TR) |
LT1223
9
1223fb
Shutdown
Pin 8 activates a shutdown control function. Pulling more
than 200mA from Pin 8 drops the supply current to less
than 3mA, and puts the output into a high impedance state.
The easy way to force shutdown is to ground Pin 8, using
an open collector (drain) logic stage. An internal resistor
limits current, allowing direct interfacing with no addi-
tional parts. When Pin 8 is open, the LT1223 operates
normally.
Slew Rate
The slew rate of a current feedback amplifier is not inde-
pendent of the amplifier gain configuration the way it is in
a traditional op amp. This is because the input stage and
the output stage both have slew rate limitations. Inverting
amplifiers do not slew the input and are therefore limited
only by the output stage. High gain, noninverting amplifi-
ers are similar. The input stage slew rate of the LT1223 is
about 350V/
s before it becomes nonlinear and is en-
hanced by the normally reverse-biased emitters on the
input transistors. The output slew rate depends on the size
of the feedback resistors. The peak output slew rate is
about 2000V/
s with a 1k feedback resistor and drops
proportionally for larger values. At an output slew rate of
1000V/
s or more, the transistors in the “mirror circuits”
will begin to saturate due to the large feedback currents.
This causes the output to have slew induced overshoot and
is somewhat unusual looking; it is in no way harmful or
dangerous to the device. The photos show the LT1223 in
a noninverting gain of three (RF = 1k, RG = 500) with a
20V peak-to-peak output slewing at 500V/
s, 1000V/s
and 2000V/
s.
Settling Time
The Inverting Amplifier Settling Time versus Output Step
curve shows that the LT1223 will settle to within 1mV of
final value in less than 100ns for all output changes of 10V
or less. When operated as an inverting amplifier there is
less than 500
V of thermal settling in the amplifier.
However, when operating the LT1223 as a noninverting
amplifier, there is an additional thermal settling compo-
nent that is about 200
V for every volt of input common
mode change. So a noninverting gain of one amplifier will
Output Slew Rate at 2000V/
s Shows Aberrations (See Text)
Output Slew Rate of 1000V/
s
Output Slew Rate of 500V/
s
1223 A01
1223 A02
1223 A03
APPLICATIO S I FOR ATIO
WU
U
相关PDF资料 |
PDF描述 |
|---|---|
| LT1224CN8 | IC OP-AMP HI-SPEED 45MHZ 8-DIP |
| LT1225CS8#TR | IC OPAMP 150MHZ HI SPEED 8SOIC |
| LT1226CS8#TRPBF | IC OP-AMP HI-SPD LOW NOISE 8SOIC |
| LT1228IS8#TRPBF | IC CRNT FEEDBK AMP 100MHZ 8SOIC |
| LT1230CS#TRPBF | IC CURR FEEDBACK AMP QUAD 14SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1223M | 制造商:LINER 制造商全称:Linear Technology 功能描述:100MHz Current Feedback Amplifier |
| LT1223MJ8 | 制造商:LINER 制造商全称:Linear Technology 功能描述:100MHz Current Feedback Amplifier |
| LT1224 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very High Speed Operational Amplifier |
| LT1224C | 制造商:LINER 制造商全称:Linear Technology 功能描述:Very High Speed Operational Amplifier |
| LT1224CN8 | 功能描述:IC OP-AMP HI-SPEED 45MHZ 8-DIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:电流检测 电路数:1 输出类型:- 转换速率:- 增益带宽积:125kHz -3db带宽:- 电流 - 输入偏压:- 电压 - 输入偏移:100µV 电流 - 电源:1.1µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:4-WFBGA，CSPBGA 供应商设备封装:4-UCSP（2x2） 包装:剪切带 (CT) 其它名称:MAX9634WERS+TCT |
发布紧急采购，3分钟左右您将得到回复。