参数资料
型号: LT1223CS8#TRPBF
厂商: Linear Technology
文件页数: 2/16页
文件大小: 0K
描述: IC CURRNT FEEDBK AMP100MHZ 8SOIC
标准包装: 2,500
放大器类型: 电流反馈
电路数: 1
转换速率: 1300 V/µs
-3db带宽: 100MHz
电流 - 输入偏压: 1µA
电压 - 输入偏移: 1000µV
电流 - 电源: 6mA
电流 - 输出 / 通道: 60mA
电压 - 电源,单路/双路(±): 8 V ~ 36 V,±4 V ~ 18 V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SO
包装: 带卷 (TR)
LT1223
10
1223fb
have about 2.5mV thermal tail on a 10V step. Unfortu-
nately, reducing the input signal and increasing the gain
always results in a thermal tail of about the same amount
for a given output step. For this reason we show separate
graphs of 10mV and 1mV non-inverting amplifier settling
times. Just as the bandwidth of the LT1223 is fairly
constant for various closed-loop gains, the settling time
remains constant as well.
Adjustable Gain Amplifier
To make a variable gain amplifier with the LT1223, vary the
value of RG. The implementation of RG can be a pot, a light
controlled resistor, a FET, or any other low capacitance
variable resistor. The value of RF should not be varied to
change the gain. If RF is changed, then the bandwidth will
be reduced at maximum gain and the circuit will oscillate
when RF is very small.
Adjustable Bandwidth Amplifier
Because the resistance at the inverting input determines
the bandwidth of the LT1223, an adjustable bandwidth
circuit can be made easily. The gain is set as before with
RF and RG; the bandwidth is maximum when the variable
resistor is at a minimum.
Accurate Bandwidth Limiting the LT1223
It is very common to limit the bandwidth of an op amp by
putting a small capacitor in parallel with RF. DO NOT PUT
A SMALL CAPACITOR FROM THE INVERTING INPUT OF
A CURRENT FEEDBACK AMPLIFIER TO ANYWHERE ELSE,
ESPECIALLY NOT TO THE OUTPUT. The capacitor on the
inverting input will cause peaking or oscillations. If you
need to limit the bandwidth of a current feedback amplifier,
use a resistor and capacitor at the noninverting input (R1
and C1). This technique will also cancel (to a degree) the
peaking caused by stray capacitance at the inverting input.
Unfortunately, this will not limit the output noise the way
it does for the op amp.
Current Feedback Amplifier Integrator
Since we remember that the inverting input wants to see
a resistor, we can add one to the standard integrator
circuit. This generates a new summing node where we can
apply capacitive feedback. The LT1223 integrator has
excellent large signal capability and accurate phase shift at
high frequencies.
APPLICATIO S I FOR ATIO
WU
U
LT1223 TA03
+
IN
V
OUT
V
LT1223
RF
RG
LT1223 TA04
+
IN
V
OUT
V
LT1223
RF
5k
RG
LT1223 TA05
+
IN
V
OUT
V
LT1223
RF
RG
R1
R1 = 300
C1
C1 = 100pF
BW = 5MHz
LT1223 TA06
+
IN
V
OUT
V
LT1223
RF
1k
C1
OUT
V
IN
V
1
sC1R1
=
R1
相关PDF资料
PDF描述
LT1224CN8 IC OP-AMP HI-SPEED 45MHZ 8-DIP
LT1225CS8#TR IC OPAMP 150MHZ HI SPEED 8SOIC
LT1226CS8#TRPBF IC OP-AMP HI-SPD LOW NOISE 8SOIC
LT1228IS8#TRPBF IC CRNT FEEDBK AMP 100MHZ 8SOIC
LT1230CS#TRPBF IC CURR FEEDBACK AMP QUAD 14SOIC
相关代理商/技术参数
参数描述
LT1223M 制造商:LINER 制造商全称:Linear Technology 功能描述:100MHz Current Feedback Amplifier
LT1223MJ8 制造商:LINER 制造商全称:Linear Technology 功能描述:100MHz Current Feedback Amplifier
LT1224 制造商:LINER 制造商全称:Linear Technology 功能描述:Very High Speed Operational Amplifier
LT1224C 制造商:LINER 制造商全称:Linear Technology 功能描述:Very High Speed Operational Amplifier
LT1224CN8 功能描述:IC OP-AMP HI-SPEED 45MHZ 8-DIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:电流检测 电路数:1 输出类型:- 转换速率:- 增益带宽积:125kHz -3db带宽:- 电流 - 输入偏压:- 电压 - 输入偏移:100µV 电流 - 电源:1.1µA 电流 - 输出 / 通道:- 电压 - 电源,单路/双路(±):- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:4-WFBGA,CSPBGA 供应商设备封装:4-UCSP(2x2) 包装:剪切带 (CT) 其它名称:MAX9634WERS+TCT