参数资料
型号: LT1913IDD#PBF
厂商: Linear Technology
文件页数: 13/24页
文件大小: 0K
描述: IC REG BUCK ADJ 3.5A 10DFN
标准包装: 121
类型: 降压(降压)
输出类型: 可调式
输出数: 1
输出电压: 0.79 V ~ 25 V
输入电压: 3.6 V ~ 25 V
PWM 型: 电流模式
频率 - 开关: 200kHz ~ 2.4MHz
电流 - 输出: 3.5A
同步整流器:
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 10-WFDFN 裸露焊盘
包装: 管件
供应商设备封装: 10-DFN(3x3)
LT1913
APPLICATIONS INFORMATION
Table 2. Capacitor Vendors
VENDOR
Panasonic
PHONE
(714) 373-7366
URL
www.panasonic.com
PART SERIES
Ceramic,
COMMANDS
Polymer,
Tantalum
EEF Series
Kemet
Sanyo
(864) 963-6300
(408) 749-9714
www.kemet.com
www.sanyovideo.com
Ceramic,
Tantalum
Ceramic,
Polymer,
T494, T495
POSCAP
Tantalum
Murata
AVX
Taiyo Yuden
(408) 436-1300
(864) 963-6300
www.murata.com
www.avxcorp.com
www.taiyo-yuden.com
Ceramic
Ceramic,
Tantalum
Ceramic
TPS Series
rating, may be required. High performance tantalum or
electrolytic capacitors can be used for the output capacitor.
Low ESR is important, so choose one that is intended for
use in switching regulators. The ESR should be speci-
typical peak switch current. Peak reverse voltage is equal
to the regulator input voltage. Use a schottky diode with a
reverse voltage rating greater than the input voltage. Table
3 lists several Schottky diodes and their manufacturers.
?ed by the supplier, and should be 0.05 or less. Such a
capacitor will be larger than a ceramic capacitor and will
have a larger capacitance, because the capacitor must be
large to achieve low ESR. Table 2 lists several capacitor
vendors.
Catch Diode
The catch diode conducts current only during switch off
Table 3. Diode Vendors
PART NUMBER
On Semiconductor
MBRA340
Diodes Inc.
B330
B320
V R
(V)
40
30
20
I AVE
(A)
3
3
3
V F AT 3A
(mV)
500
500
450
time. Average forward current in normal operation can
be calculated from:
I D(AVG) = I OUT (V IN – V OUT )/V IN
where I OUT is the output load current. The only reason to
consider a diode with a larger current rating than necessary
for nominal operation is for the worst-case condition of
shorted output. The diode current will then increase to the
Frequency Compensation
The LT1913 uses current mode control to regulate the
output. This simpli?es loop compensation. In particular, the
LT1913 does not require the ESR of the output capacitor
for stability, so you are free to use ceramic capacitors to
achieve low output ripple and small circuit size. Frequency
compensation is provided by the components tied to the
1913f
13
相关PDF资料
PDF描述
MAX6422XS28+T IC MPU/RESET CIRC 2.80V SC70-4
LT1533CS#PBF IC REG PUSH-PLL CTRLR ISO 16SOIC
LT3693IDD#PBF IC REG BUCK ADJ 3.5A 10DFN
LT3972EMSE#PBF IC REG BUCK ADJ 3.5A 10MSOP
LT1976IFE#PBF IC REG BUCK ADJ 1.5A 16TSSOP
相关代理商/技术参数
参数描述
LT1913IDD-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:25V, 3.5A, 2.4MHz Step-Down Switching Regulator
LT1920 制造商:LINER 制造商全称:Linear Technology 功能描述:Single Resistor Gain Programmable, Precision Instrumentation Amplifier
LT1920C 制造商:LINER 制造商全称:Linear Technology 功能描述:Single Resistor Gain Programmable, Precision Instrumentation Amplifier
LT1920CN8 功能描述:IC PREC INSTRUMENTATION AMP 8DIP RoHS:否 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:350 V/µs 增益带宽积:180MHz -3db带宽:320MHz 电流 - 输入偏压:12.5µA 电压 - 输入偏移:800µV 电流 - 电源:15mA 电流 - 输出 / 通道:85mA 电压 - 电源,单路/双路(±):2.5 V ~ 12.6 V,±1.25 V ~ 6.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP,8-MSOP(0.118",3.00mm 宽) 供应商设备封装:8-MSOP 包装:带卷 (TR)
LT1920CN8#PBF 功能描述:IC PREC INSTRUMENTATION AMP 8DIP RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 标准包装:2,500 系列:- 放大器类型:通用 电路数:2 输出类型:满摆幅 转换速率:350 V/µs 增益带宽积:180MHz -3db带宽:320MHz 电流 - 输入偏压:12.5µA 电压 - 输入偏移:800µV 电流 - 电源:15mA 电流 - 输出 / 通道:85mA 电压 - 电源,单路/双路(±):2.5 V ~ 12.6 V,±1.25 V ~ 6.3 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP,8-MSOP(0.118",3.00mm 宽) 供应商设备封装:8-MSOP 包装:带卷 (TR)