参数资料
| 型号： | LT1942EUF#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 10/16页 |
| 文件大小： | 0K |
| 描述： | IC REG SW QUAD TFT LCD 24-QFN |
| 标准包装： | 2,500 |
| 应用： | 转换器，TFT |
| 输入电压： | 2.6 V ~ 16 V |
| 输出数： | 4 |
| 输出电压： | 1.25 V ~ 36 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 24-WFQFN 裸露焊盘 |
| 供应商设备封装： | 24-QFN 裸露焊盘（4x4） |
| 包装： | 带卷 (TR) |
LT1942
OPERATIO
Refer to the figure on the first page of this data sheet and
the Block Diagram when following the description of the
operation of the LT1942. The LT1942 contains four switch-
ing regulators. Three switchers are designed to be used as
the power supply for driving small to medium sized TFT
displays. The fourth switcher is designed to power an LED
backlight. All four switching regulators use a constant
frequency, current mode control scheme to provide excel-
lent line and load regulation.
TFT Supply
The three switching regulators for the TFT supply are
named AV DD , V OFF and V ON . Both the AV DD and V ON
switchers are boost type, while the V OFF is an inverting
type. Power sequencing circuitry is integrated into the
LT1942 to properly power up the TFT power supply. When
the SHDN pin is driven above 1V initially, only the AV DD
switcher is enabled. After the output of the AV DD switcher
reaches 97% of its final value, the PGOOD pin is driven low
and both the V OFF and V ON switchers are enabled. This
event is latched rejecting any later drops on AV DD below
97%. The output-disconnect circuitry (Q5 in the Block
Diagram) for the V ON switcher is not activated until the
programmable delay set by the CT pin has elapsed. Once
the output-disconnect circuitry is enabled, the V OUT3 pin is
driven to nearly the same voltage as D3. The V OUT3 pin can
only source current and is limited to 15mA nominally. All
LED Supply
The fourth switching regulator in the LT1942 is designed
to drive up to 20 LEDs (2 strings of 10) to power a
backlight. The LED switcher has an integrated current
ballaster (Q6 and Q7 in the Block Diagram) which enables
two strings of LEDs to have active current matching. The
current into LED1 and LED2 will always be actively matched,
regardless of which LED string has the highest voltage
drop. The LED ballast circuitry can be left unused when
driving a single string of LEDs. Simply leave the LED1 and
LED2 inputs floating and return the LED string directly to
the FB4 pin. The LED switcher has an independent control
pin which serves two functions: shutdown and reference
adjustment. The CTRL4 pin needs to be driven above
0.25V to enable the LED switcher. When CTRL4 is between
0.25V and 2.5V, the internal reference for the LED switcher
is attenuated. If CTRL4 is above 2.5V, the internal refer-
ence is limited to 200mV no matter how high CTRL4 is.
This feature allows an 8:1 dimming range for the LEDs.
The LED switching regulator is internally compensated
and operates at a fixed frequency of 1MHz. The LED
switching regulator has LED open-circuit protection. If
any LED fails open, D4 is not allowed to exceed 42V
(typical). This prevents damage to the power switch. The
LED switching regulator also has built in soft-start. By
placing a capacitor from the SS4 pin to GND, the user can
program the soft-start time.
three switching regulators are internally compensated and
operated at a fixed frequency of 1MHz. The AV DD switch-
ing regulator has integrated soft-start. Simply place a
capacitor from the SS1 pin to GND to implement soft-start.
1942fb
10
相关PDF资料 |
PDF描述 |
|---|---|
| LT1943EFE#TRPBF | IC REG SW QUAD TFT LCD 28-TSSOP |
| LT1944-1EMS#TR | IC REG BST ADJ 0.1A/175MA 10MSOP |
| LT1945IMS#TRPBF | IC REG MULTI CONFIG ADJ 10MSOP |
| LT1946EMS8E#TRPBF | IC REG BOOST 1.5A 8MSOP |
| LT1947EMSE#TRPBF | IC REG TFT-LCD ADJ 10-MSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1943 | 制造商:LINER 制造商全称:Linear Technology 功能描述:Quad DCDC Converter for Triple Outputs TFT Supply Plus LED Driver |
| LT1943_1 | 制造商:LINER 制造商全称:Linear Technology 功能描述:High Current Quad Output Regulator for TFT LCD Panels |
| LT1943EFE | 功能描述:IC REG SW QUAD TFT LCD 28-TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 标准包装:43 系列:- 应用:控制器，Intel VR11 输入电压:5 V ~ 12 V 输出数:1 输出电压:0.5 V ~ 1.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘 供应商设备封装:48-QFN（7x7） 包装:管件 |
| LT1943EFE#PBF | 功能描述:IC REG SW QUAD TFT LCD 28-TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 标准包装:43 系列:- 应用:控制器，Intel VR11 输入电压:5 V ~ 12 V 输出数:1 输出电压:0.5 V ~ 1.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘 供应商设备封装:48-QFN（7x7） 包装:管件 |
| LT1943EFE#TR | 功能描述:IC REG SW QUAD TFT LCD 28-TSSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - 专用型 系列:- 标准包装:43 系列:- 应用:控制器，Intel VR11 输入电压:5 V ~ 12 V 输出数:1 输出电压:0.5 V ~ 1.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-VFQFN 裸露焊盘 供应商设备封装:48-QFN（7x7） 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。