- 您现在的位置：买卖IC网 > PDF目录14147 > LT1944-1EMS#TRPBF (Linear Technology)IC REG BST ADJ 0.1A/175MA 10MSOP PDF资料下载
参数资料
| 型号： | LT1944-1EMS#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 6/8页 |
| 文件大小： | 0K |
| 描述： | IC REG BST ADJ 0.1A/175MA 10MSOP |
| 标准包装： | 2,500 |
| 类型： | 升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 2 |
| 输出电压： | 1.23 V ~ 36 V |
| 输入电压： | 1.2 V ~ 15 V |
| 电流 - 输出： | 100mA，175mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 10-MSOP |
LT1944-1
APPLICATIO S I FOR ATIO
R 1 = R 2 ? OUT ? 1 ?
limited to 100mA (or 175mA), the power switch of the
LT1944-1 can handle larger currents without problem, but
the overall efficiency will suffer. Best results will be ob-
tained when I PEAK is kept below 400mA for the LT1944-1.
Capacitor Selection
Low ESR (Equivalent Series Resistance) capacitors should
be used at the output to minimize the output ripple voltage.
Multilayer ceramic capacitors are the best choice, as they
have a very low ESR and are available in very small
packages. Their small size makes them a good companion
to the LT1944-1’s MS10 package. Solid tantalum capaci-
tors (like the AVX TPS, Sprague 593D families) or OS-CON
capacitors can be used, but they will occupy more board
area than a ceramic and will have a higher ESR. Always use
a capacitor with a sufficient voltage rating.
Ceramic capacitors also make a good choice for the input
decoupling capacitor, which should be placed as close as
possible to the LT1944-1. A 4.7 μ F input capacitor is
sufficient for most applications. Table 2 shows a list of
several capacitor manufacturers. Consult the manufactur-
ers for more detailed information and for their entire
selection of related parts.
Table 2. Recommended Capacitors
CAPACITOR TYPE VENDOR
Ceramic Taiyo Yuden
(408) 573-4150
www.t-yuden.com
Setting the Output Voltage
Set the output voltage for each switching regulator by
choosing the appropriate values for feedback resistors R1
and R2 (see Figure 1).
? V ?
? 1 . 23 V ?
Diode Selection
For most LT1944-1 applications, the Philips BAT54 or
Central Semiconductor CMDSH-3 surface mount Schottky
diodes are an ideal choice. Schottky diodes, with their low
forward voltage drop and fast switching speed, are the
best match for the LT1944-1. Many different manufactur-
ers make equivalent parts, but make sure that the compo-
nent is rated to handle at least 100mA.
Lowering Output Voltage Ripple
Using low ESR capacitors will help minimize the output
ripple voltage, but proper selection of the inductor and the
output capacitor also plays a big role. The LT1944-1
provides energy to the load in bursts by ramping up the
inductor current, then delivering that current to the load.
If too large of an inductor value or too small of a capacitor
value is used, the output ripple voltage will increase
because the capacitor will be slightly overcharged each
burst cycle. To reduce the output ripple, increase the
Ceramic
Ceramic
6
AVX
(803) 448-9411
www.avxcorp.com
Murata
(714) 852-2001
www.murata.com
output capacitor value or add a 4.7pF feed-forward capaci-
tor in the feedback network of the LT1944-1 (see the
circuits in the Typical Applications section). Adding this
small, inexpensive 4.7pF capacitor will greatly reduce the
output voltage ripple.
相关PDF资料 |
PDF描述 |
|---|---|
| CGS154ULX5L3PD | CAP ALUM 150000UF 40V SCREW |
| CGH152T500V5C | CAP ALUM 1500UF 500V SCREW |
| LQR2G562MSEH | CAP ALUM 5600UF 400V 20% SCREW |
| LQR2G562MSEG | CAP ALUM 5600UF 400V 20% SCREW |
| CGS602T300X8L | CAP ALUM 6000UF 300V SCREW |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT1944EMS | 功能描述:IC REG BOOST ADJ 0.35A DL 10MSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC |
| LT1944EMS#PBF | 功能描述:IC REG BOOST ADJ 0.35A DL 10MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:250 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V 输入电压:2.05 V ~ 6 V PWM 型:电压模式 频率 - 开关:2MHz 电流 - 输出:500mA 同步整流器:是 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:6-UFDFN 包装:带卷 (TR) 供应商设备封装:6-SON（1.45x1） 产品目录页面:1032 (CN2011-ZH PDF) 其它名称:296-25628-2 |
| LT1944EMS#TR | 功能描述:IC REG BOOST ADJ 0.35A DL 10MSOP RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC |
| LT1944EMS#TRPBF | 功能描述:IC REG BOOST ADJ 0.35A DL 10MSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC |
| LT1944EMSPBF | 制造商:Linear Technology 功能描述:Conv DC-DC Dual Step-Up 1.2-15V MSOP10 |
发布紧急采购，3分钟左右您将得到回复。