参数资料
型号: LT3014EDD#PBF
厂商: Linear Technology
文件页数: 7/16页
文件大小: 0K
描述: IC REG LDO ADJ 20MA 8-DFN
产品培训模块: More Information on LDOs
标准包装: 121
稳压器拓扑结构: 正,可调式
输出电压: 1.22 V ~ 60 V
输入电压: 3 V ~ 80 V
电压 - 压降(标准): 0.35V @ 20mA
稳压器数量: 1
电流 - 输出: 20mA
电流 - 限制(最小): 25mA
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 8-WFDFN 裸露焊盘
供应商设备封装: 8-DFN-EP(3x3)
包装: 管件
产品目录页面: 1330 (CN2011-ZH PDF)
LT3014
PIN FUNCTIONS
(SOT-23 Package/DD Package)
IN (Pin 1/Pin 8): Input. Power is supplied to the device
through the IN pin. A bypass capacitor is required on this
pin if the device is more than six inches away from the main
input ?lter capacitor. In general, the output impedance of
a battery rises with frequency, so it is advisable to include
a bypass capacitor in battery-powered circuits. A bypass
capacitor in the range of 0.1μF to 10μF is suf?cient. The
LT3014 is designed to withstand reverse voltages on the IN
pin with respect to ground and the OUT pin. In the case of
a reversed input, which can happen if a battery is plugged
in backwards, the LT3014 will act as if there is a diode in
series with its input. There will be no reverse current ?ow
into the LT3014 and no reverse voltage will appear at the
load. The device will protect both itself and the load.
GND (Pin 2/Pins 4, 9): Ground.
SHDN (Pin 3/Pin 5): Shutdown. The SHDN pin is used
to put the LT3014 into a low power shutdown state. The
output will be off when the SHDN pin is pulled low. The
SHDN pin can be driven either by 5V logic or open-collector
logic with a pull-up resistor. The pull-up resistor is only
required to supply the pull-up current of the open-collec-
tor gate, normally several microamperes. If unused, the
SHDN pin must be tied to IN or to a logic high.
ADJ (Pin 4/Pin 2): Adjust. This is the input to the error
ampli?er. This pin is internally clamped to ±7V. It has a
bias current of 4nA which ?ows into the pin (see curve
of ADJ Pin Bias Current vs Temperature in the Typical
Performance Characteristics). The ADJ pin voltage is
1.22V referenced to ground, and the output voltage range
is 1.22V to 60V.
OUT (Pin 5/Pin 1): Output. The output supplies power to
the load. A minimum output capacitor of 0.47μF is required
to prevent oscillations. Larger output capacitors will be
required for applications with large transient loads to limit
peak voltage transients. See the Applications Information
section for more information on output capacitance and
reverse output characteristics.
3014fd
7
相关PDF资料
PDF描述
ESM15DRMT-S273 CONN EDGECARD 30POS .156 WW
GSA15DTMS CONN EDGECARD 30POS R/A .125 SLD
AP1084K25L-U IC REG LDO 2.5V 5A TO-263
VI-B5M-EU-F1 CONVERTER MOD DC/DC 10V 200W
EGM15DRMT-S273 CONN EDGECARD 30POS .156 WW
相关代理商/技术参数
参数描述
LT3014ES5 制造商:LINER 制造商全称:Linear Technology 功能描述:20mA, 3V to 80V Low Dropout Micropower Linear Regulator
LT3014ES5#PBF 制造商:Linear Technology 功能描述:LDO Regulator Pos 1.22V to 60V 0.02A 5-Pin TSOT-23 制造商:Linear Technology 功能描述:LDO 0.35VDO 0.02A ADJ 5SOT23 制造商:Linear Technology 功能描述:LDO, 0.35VDO, 0.02A, ADJ, 5SOT23 制造商:Linear Technology 功能描述:SP-LINREG, Cut Tape 80Vin, 20mA, LDO in ThinSOT
LT3014ES5#TR 制造商:Linear Technology 功能描述:SP-LINREG, 80Vin, 20mA, LDO in ThinSOT
LT3014ES5#TRMPBF 功能描述:IC REG LDO ADJ 20MA TSOT-23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:MIC5365/66 Ultra-small LDO Regulators 标准包装:1 系列:- 稳压器拓扑结构:正,固定式 输出电压:3V 输入电压:最高 5.5V 电压 - 压降(标准):0.155V @ 150mA 稳压器数量:1 电流 - 输出:150mA 电流 - 限制(最小):200mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:4-UDFN 裸露焊盘,4-TMLF? 供应商设备封装:4-TMLF?(1x1) 包装:Digi-Reel® 其它名称:576-3192-6
LT3014ES5#TRPBF 功能描述:IC REG LDO ADJ 20MA TSOT-23-5 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:More Information on LDOs 标准包装:50 系列:- 稳压器拓扑结构:正,固定式 输出电压:3.3V 输入电压:最高 15V 电压 - 压降(标准):1.1V @ 800mA 稳压器数量:1 电流 - 输出:800mA 电流 - 限制(最小):800mA 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-263-4,D²Pak(3 引线+接片),TO-263AA 供应商设备封装:D2PAK-3 包装:管件