- 您现在的位置：买卖IC网 > PDF目录1825 > LT3495EDDB-1#TRMPBF (Linear Technology)IC REG BOOST ADJ 0.35A 10DFN PDF资料下载
参数资料
| 型号： | LT3495EDDB-1#TRMPBF |
| 厂商： | Linear Technology |
| 文件页数： | 9/16页 |
| 文件大小： | 0K |
| 描述： | IC REG BOOST ADJ 0.35A 10DFN |
| 标准包装： | 1 |
| 类型： | 升压（升压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 1.24 V ~ 40 V |
| 输入电压： | 2.3 V ~ 16 V |
| PWM 型： | 混合物 |
| 频率 - 开关： | 可调至 45kHz |
| 电流 - 输出： | 350mA |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-WFDFN 裸露焊盘 |
| 包装： | 标准包装 |
| 供应商设备封装： | 10-DFN-EP（3x2） |
| 产品目录页面： | 1331 (CN2011-ZH PDF) |
| 其它名称： | LT3495EDDB-1#TRMPBFDKR |
LT3495/LT3495B/
LT3495-1/LT3495B-1
APPLICATIONS INFORMATION
V IN ? 200 ? 10
I PK = I LIMIT + amps
InductorSelection
Several inductors that work well with the LT3495/LT3495B
are listed in Table 2 and those for the LT3495-1/LT3495B-1
are listed in Table 3. These tables are not complete, and
there are many other manufacturers and devices that can
be used. Consult each manufacturer for more detailed
information and for their entire selection of related parts,
as many different sizes and shapes are available.
Inductors with a value of 3.3μH or higher are recommended
for most LT3495 series designs. Inductors with low core
losses and small DCR (copper wire resistance) are good
choices for LT3495 series applications. For full output
power, the inductor should have a saturation current rating
higher than the peak inductor current. The peak inductor
current can be calculated as:
–9
L
where I LIMIT is 0.65A and 0.35A for LT3495/LT3495B and
LT3495-1/LT3495B-1 respectively. L is the inductance
value in Henrys and V IN is the input voltage to the boost
circuit.
Table 2. Recommended Inductors for LT3495/LT3495B
L DCR
PART (μH) (mΩ) SIZE (mm) VENDOR
LPS4018-103ML 10 200 4.4 × 4.4 × 1.7 Coilcraft
MSS5131-103MLC 10 83 5.1 × 5.1 × 3.1 www.coilcraft.com
LPS3015-472MLC 4.7 200 3.0 × 3.0 × 1.5
LPS3015-682MLC 6.8 300 3.0 × 3.0 × 1.5
LQH43CN4R7M03 4.7 150 4.5 × 3.2 × 2.8 Murata
www.murata.com
input capacitor and a 1μF to 10μF output capacitor are
sufficient for most applications. Always use a capacitor
with a sufficient voltage rating. Many capacitors rated at
1μF to 10μF, particularly 0603 case sizes, have greatly
reduced capacitance when bias voltages are applied. Be
sure to check actual capacitance at the desired output
voltage. Generally a 0805 or 1206 size capacitor will be
adequate. A 2.2μF capacitor placed on the CAP node is
recommended to filter the inductor current while a 1μF to
10μF capacitor placed on the V OUT node will give excellent
transient response and stability. Table 4 shows a list of
several capacitor manufacturers. Consult the manufac-
turers for more detailed information and for their entire
selection of related parts.
Table 3. Recommended Inductors for LT3495-1/LT3495B-1
L DCR
PART (μH) (mΩ) SIZE (mm) VENDOR
LPO4815-472MLC 4.7 150 4.8 × 4.8 × 1.5 Coilcraft
LPO4815-682MLC 6.8 180 4.8 × 4.8 × 1.5 www.coilcraft.com
LPO4815-103MLC 10 230 4.8 × 4.8 × 1.5
LPS3008-472MLC 4.7 350 3.0 × 3.0 × 0.8
LPS3008-682MLC 6.8 500 3.0 × 3.0 × 0.8
LPS3008-103MLC 10 650 3.0 × 3.0 × 0.8
LQH32CN4R7M53 4.7 150 3.2 × 2.5 × 1.6 Murata
LQH32CN100K33 10 300 3.2 × 2.5 × 2.0 www.murata.com
CDH28D09/S-6R2 6.2 369 3.3 × 3.0 × 1.0 Sumida
www.sumida.com
744030004 4.7 290 3.5 × 3.3 × 1.0 Wurth Elektronik
www.we-online.com
Table 4. Recommended Ceramic Capacitor Manufacturers
MANUFACTURER PHONE WEBSITE
Taiyo Yuden (408) 573-4150 www.t-yuden.com
CR32-6R8
744031004
6.8
4.7
202
105
4.1 × 3.7 × 3.0 Sumida
www.sumida.com
3.8 × 3.8 × 1.7 Wurth Elektronik
www.we-online.com
AVX
Murata
Kemet
TDK
(843) 448-9411
(814) 237-1431
(408) 986-0424
(847) 803-6100
www.avxcorp.com
www.murata.com
www.kemet.com
www.tdk.com
Capacitor Selection
The small size and low ESR of ceramic capacitors makes
them suitable for most LT3495 series applications. X5R
and X7R types are recommended because they retain
their capacitance over wider voltage and temperature
ranges than other types such as Y5V or Z5U. A 4.7μF
Diode Selection
Schottky diodes, with their low forward voltage drops and
fast switching speeds, are recommended for use with the
LT3495 series. The Diodes Inc. B0540WS-7 is a very good
choice. This diode is rated to handle an average forward
current of 0.5A with 40V reverse breakdown.
3495b1b1fa
9
相关PDF资料 |
PDF描述 |
|---|---|
| LT3501IFE#TRPBF | IC REG BUCK ADJ 3A DL 20TSSOP |
| LT3502IMS#TRPBF | IC REG BUCK ADJ 0.5A 10MSOP |
| LT3503EDCB#TRPBF | IC REG BUCK ADJ 1A 6DFN |
| LT3505IMS8E#TRPBF | IC REG BUCK ADJ 1.2A 8MSOP |
| LT3506IDHD#PBF | IC REG BUCK ADJ 1.6A DL 16DFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3495EDDB-1-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:650mA/350mA Micropower Low Noise Boost Converter with Output Disconnect |
| LT3495EDDB-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:650mA/350mA Micropower Low Noise Boost Converter with Output Disconnect |
| LT3495EDDB-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:650mA/350mA Micropower Low Noise Boost Converter with Output Disconnect |
| LT3496 | 制造商:LINER 制造商全称:Linear Technology 功能描述:16-Channel 50mA LED |
| LT3496EFE#PBF | 功能描述:IC LED DRVR WT/RGB BCKLT 28TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:60 系列:- 恒定电流:- 恒定电压:- 拓扑:线性（LDO），PWM，升压（升压） 输出数:8 内部驱动器:是 类型 - 主要:背光 类型 - 次要:RGB，白色 LED 频率:500kHz ~ 1.5MHz 电源电压:4.75 V ~ 26 V 输出电压:45V 安装类型:* 封装/外壳:* 供应商设备封装:* 包装:* 工作温度:-40°C ~ 85°C |
发布紧急采购，3分钟左右您将得到回复。