参数资料
型号: LT3650EMSE-8.4#PBF
厂商: Linear Technology
文件页数: 14/22页
文件大小: 0K
描述: IC BATTERY CHARGER LI 12MSOP
标准包装: 37
功能: 充电管理
电池化学: 锂离子(Li-Ion)、锂聚合物(Li-Pol)
电源电压: 9 V ~ 32 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 12-TSSOP (0.118",3.00mm 宽)裸露焊盘
供应商设备封装: 12-MSOP,裸露焊盘
包装: 管件
产品目录页面: 1340 (CN2011-ZH PDF)
LT3650-8.2/LT3650-8.4
APPLICATIONS INFORMATION
R RNG/SS = RNG/SS
R RNG/SS =
= 10k ?
RNG/SS:DynamicChargeCurrentAdjust
The LT3650 gives the user the capability to adjust maximum
charge current dynamically through the RNG/SS pin. The
voltage on the RNG/SS pin corresponds to ten times the
maximum voltage across the sense resistor (R SENSE ). The
default maximum sense voltage is 100mV, so maximum
charge current can be expressed as:
I MAX(RNG/SS) = I MAX ? V RNG/SS
where I MAX(RNG/SS) is the maximum charge current if
V RNG/SS is within 0V to 1V. Voltages higher than 1V have
no effect on the maximum charge current.
The LT3650 sources 50μA from the RNG/SS pin, such that
a current control voltage can be set by simply connecting
an appropriately valued resistor to ground, following the
relation:
V
50μA
For example, to reduce the maximum charge current to 50%
of the original value, which corresponds to a maximum
sense voltage of 50mV, RNG/SS would be set to 0.5V.
0.5V
50μA
LT3650
RNG/SS
10k
This feature could be used, for example, to switch in a
reduced charge current level. Active servos can also be
used to impose voltages on the RNG/SS pin, provided they
can only sink current. Active circuits that source current
cannot be used to drive the RNG/SS pin. Resistive pull-
ups can be used, but extreme care must be taken not to
exceed the 2.5V absolute maximum voltage on the pin.
RNG/SS: Soft-Start
Soft-start functionality is also supported by the RNG/SS
pin. 50μA is sourced from the RNG/SS pin, so connecting
a capacitor from the RNG/SS pin to ground (C RNG/SS ) cre-
ates a linear voltage ramp. The maximum charge current
follows this voltage. Thus, the charge current increases
from zero to the fully programmed value as the capacitor
charges from 0V to 1V. The value of C RNG/SS is calculated
based on the desired time to full current (t SS ) following
the relation:
C RNG/SS = 50μA ? t SS
The RNG/SS pin is pulled to ground internally when charg-
ing is terminated so each new charging cycle begins with
a soft-start cycle. RNG/SS is also pulled to ground during
bad-battery and NTC fault conditions, so a graceful recovery
from these faults is possible.
LT3650
RNG/SS
+
365082 F06
LOGIC HIGH = HALF CURRENT
365082 F07
SERVO REFERENCE
Figure 6. Using the RNG/SS Pin for Digital
Control of Maximum Charge Current
Figure 7. Driving the RNG/SS Pin with a
Current-Sink Active Servo Amplifier
LT3650
RNG/SS
C PROG
365082 F08
Figure 8. Using the RNG/SS Pin for Soft-Start
36508284fd
14
相关PDF资料
PDF描述
LTC4070EDDB#TRMPBF IC LI-ION/POLY BATT CHARGER 8DFN
LTC4071EMS8E#PBF IC LI-ION/POLY BATT CHRGR 8-MSOP
3-1906012-9 CA 2.0MM OFNR 50/125,LC SEC RED
3-1906014-9 CA 2.0MM OFNR 50/125,LC SEC YEL
3-1906054-9 CA 2MM OFNR 62.5/125,LC SEC GRE
相关代理商/技术参数
参数描述
LT3650IDD-4.1 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage 2 Amp Monolithic Li-Ion Battery Charger
LT3650IDD-4.1#PBF 功能描述:IC CHARGER LI-ION 2A 12-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 其它有关文件:STC3100 View All Specifications 特色产品:STC3100 - Battery Monitor IC 标准包装:4,000 系列:- 功能:燃料,电量检测计/监控器 电池化学:锂离子(Li-Ion) 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-TSSOP,8-MSOP(0.118",3.00mm 宽) 供应商设备封装:8-MiniSO 包装:带卷 (TR) 其它名称:497-10526-2
LT3650IDD-4.1#TRPBF 功能描述:IC CHARGER LI-ION 4.1V 2A 12-DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 电池管理 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 功能:电池监控器 电池化学:碱性,锂离子,镍镉,镍金属氢化物 电源电压:1 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:带卷 (TR)
LT3650IDD-4.1PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage 2 Amp Monolithic Li-Ion Battery Charger
LT3650IDD-4.1TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:High Voltage 2 Amp Monolithic Li-Ion Battery Charger