- 您现在的位置：买卖IC网 > PDF目录15999 > LT3652IMSE#PBF (Linear Technology)IC BATT CHARGER SOLAR 2A 12MSOP PDF资料下载
参数资料
| 型号： | LT3652IMSE#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 21/26页 |
| 文件大小： | 0K |
| 描述： | IC BATT CHARGER SOLAR 2A 12MSOP |
| 标准包装： | 37 |
| 功能： | 充电管理，太阳能 |
| 电池化学： | 铅酸，LiFePO4，锂离子，锂聚合物，镍镉，镍氢 |
| 电源电压： | 4.95 V ~ 32 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 12-TSSOP （0.118"，3.00mm 宽）裸露焊盘 |
| 供应商设备封装： | 12-MSOP，裸露焊盘 |
| 包装： | 管件 |
| 配用： | DC1568A-ND - BOARD BATTERY CHARGER SOLAR PWR |
LT3652
APPLICATIONS INFORMATION
In some cases, the thermal foldback protection feature
can reduce charger currents below the C/10 threshold. In
applications that use C/10 termination (TIMER=0V), the
LT3652 will suspend charging and enter standby mode
until the excessive temperature condition is relieved.
Layout Considerations
The LT3652 switch node has rise and fall times that are
typically less than 10nS to maximize conversion efficiency.
The switch node (Pin SW) trace should be kept as short
as possible to minimize high frequency noise. The input
capacitor (C IN ) should be placed close to the IC to minimize
this switching noise. Short, wide traces on these nodes
also help to avoid voltage stress from inductive ringing.
The BOOST decoupling capacitor should also be in close
proximity to the IC to minimize inductive ringing. The
SENSE and BAT traces should be routed together, and
these and the V FB trace should be kept as short as pos-
sible. Shielding these signals from switching noise with
a ground plane is recommended.
High current paths and transients should be kept iso-
lated from battery ground, to assure an accurate output
voltage reference. Effective grounding can be achieved
by considering switched current in the ground plane,
and careful component placement and orientation can
effectively steer these high currents such that the battery
reference does not get corrupted. Figure 11 illustrates an
effective grounding scheme using component placement
to control ground currents. When the switch is enabled
(loop #1), current flows from the input bypass capacitor
(C IN ) through the switch and inductor to the battery posi-
tive terminal. When the switch is disabled (loop #2), the
current to the battery positive terminal is provided from
ground through the freewheeling Schottky diode (D F ). In
both cases, these switch currents return to ground via the
output bypass capacitor (C BAT ).
The LT3652 packaging has been designed to efficiently
remove heat from the IC via the Exposed Pad on the
backside of the package, which is soldered to a copper
footprint on the PCB. This footprint should be made as
large as possible to reduce the thermal resistance of the
IC case to ambient air.
1
C IN
2
C BAT
D F
R SENSE
V BAT
V IN
LT3652
SW
+
SENSE
BAT
V FB
3652 F11
Figure 11. Component Orientation Isolates High Current Paths
from Sensitive Nodes
3652fd
21
相关PDF资料 |
PDF描述 |
|---|---|
| UWT1C151MCL1GS | CAP ALUM 150UF 16V 20% SMD |
| VI-J5L-EZ-F1 | CONVERTER MOD DC/DC 28V 25W |
| FRN1.50TB40 | TRACER 1 1/2" BLACK W/WHITE 40' |
| M3BGK-4036R | IDC CABLE - MSR40K/MC40M/MCS40K |
| MAX823SEXK+T | IC SUPERVISOR MPU SC70-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3652IMSETRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Power Tracking 2A Battery Charger for Solar Power |
| LT3653 | 制造商:LINER 制造商全称:Linear Technology 功能描述:1.2A, HV Input Regulator with Output Current Limit for Battery Charger Applications |
| LT3653EDCB#PBF | 制造商:Linear Technology 功能描述:SP-SWREG/Monolithic, Cut Tape 1.2A (Iout), 1.5MHz Input Regulator with Output Cu |
| LT3653EDCB#TRMPBF | 功能描述:IC REG BUCK ADJ 1.2A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:升压（升压） 输出类型:两者兼有 输出数:1 输出电压:5V，2 V ~ 16.5 V 输入电压:2 V ~ 16.5 V PWM 型:- 频率 - 开关:45kHz 电流 - 输出:50mA 同步整流器:无 工作温度:0°C ~ 70°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 包装:管件 供应商设备封装:8-PDIP |
| LT3653EDCB#TRPBF | 功能描述:IC REG BUCK ADJ 1.2A 8DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.2V，1.5V，1.8V，2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘 |
发布紧急采购，3分钟左右您将得到回复。