- 您现在的位置：买卖IC网 > PDF目录2156 > LT6402CUD-20#TRPBF (Linear Technology)IC DIFF AMP/ADC DRVR 16-QFN PDF资料下载
参数资料
| 型号： | LT6402CUD-20#TRPBF |
| 厂商： | Linear Technology |
| 文件页数： | 2/16页 |
| 文件大小： | 0K |
| 描述： | IC DIFF AMP/ADC DRVR 16-QFN |
| 标准包装： | 2,500 |
| 放大器类型： | 差分 |
| 电路数： | 2 |
| 输出类型： | 差分 |
| 转换速率： | 400 V/µs |
| -3db带宽： | 300MHz |
| 电流 - 输入偏压： | 5µA |
| 电压 - 输入偏移： | 1000µV |
| 电流 - 电源： | 30mA |
| 电流 - 输出 / 通道： | 35mA |
| 电压 - 电源，单路/双路(±)： | 4 V ~ 5.5 V，±2 V ~ 2.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-WFQFN 裸露焊盘 |
| 供应商设备封装： | 16-QFN-EP（3x3） |
| 包装： | 带卷 (TR) |
LT6402-20
10
640220fa
APPLICATIO S I FOR ATIO
WU
U
Circuit Description
The LT6402-20 is a low noise, low distortion differential
amplier/ADC driver with:
–3dB bandwidth
DC to 300MHz
Fixed gain independent of RLOAD
10V/V (20dB)
Differential input impedance
100Ω
Low output impedance
Built-in, user adjustable output ltering
Requires minimal support circuitry
Referring to the block diagram, the LT6402-20 uses a
closed-loop topology which incorporates 3 internal am-
pliers. Two of the ampliers (A and B) are identical and
drive the differential outputs. The third amplier is used
to set the output common mode voltage. Gain and input
impedance are set by the 500Ω and 100Ω resistors in
the internal feedback network. Output impedance is low,
determined by the inherent output impedance of ampliers
A and B, and further reduced by internal feedback.
The LT6402-20 also includes built-in single-pole output
ltering. The user has the choice of using the unltered
outputs, the ltered outputs (75MHz –3dB lowpass), or
modifying the ltered outputs to alter frequency response
by adding additional components. Many lowpass and
bandpass lters are easily implemented with just one or
two additional components.
The LT6402-20 has been designed to minimize the need
for external support components such as transformers or
AC-coupling capacitors. As an ADC driver, the LT6402-20
requires no external components except for power-supply
bypass capacitors. This allows DC-coupled operation for
applications that have frequency ranges including DC. At
the outputs, the common mode voltage is set via the VOCM
pin, allowing the LT6402-20 to drive ADCs directly. No
output AC-coupling capacitors or transformers are needed.
At the inputs, signals can be differential or single-ended
with virtually no difference in performance. Furthermore,
DC levels at the inputs can be set independently of the
output common mode voltage. These input characteristics
often eliminate the need for an input transformer and/or
AC-coupling capacitors.
Input Impedance and Matching Networks
Calculation of the input impedance of the LT6402-20 is
not straightforward from examination of the block diagram
because of the internal feedback network. In addition, the
input impedance when driven differentially is different than
when driven single-ended.
Differential
Single-Ended
LT6402-20
100Ω
85.9Ω
For single-ended 50Ω applications, a 121Ω shunt matching
resistor to ground will result in the proper input termina-
tion (Figure 1). For differential inputs there are several
termination options. If the input source is 50Ω differential,
then the input matching can be accomplished by either
a 100Ω shunt resistor across the inputs (Figure 3), or
equivalent 49.9Ω shunt resistors on each of the inputs
to ground (Figure 2). If additional AC gain is desired, an
impedance ratio transformer can also be used to better
match impedances.
6402 F01
IF IN
0.1
F
LT6402-20
–INA
–INB
–OUT
+OUT
8
5
+INB
+INA
14
13
15
121
ZIN = 50
SINGLE-ENDED
16
Figure 1. Input Termination for Single-Ended 50Ω
Input Impedance
相关PDF资料 |
PDF描述 |
|---|---|
| LT6402CUD-6#PBF | IC DIFF AMP/ADC DVR 6DB 16-QFN |
| LT6411CUD#TRPBF | IC ADC DRVR/GAIN AMP 16-QFN |
| LT6600CS8-15#TRPBF | IC AMP DIFF LP FLTR 15MHZ 8-SOIC |
| LT6600CS8-5#TRPBF | IC AMP DIFF LP FLTR 5MHZ 8-SOIC |
| LT6600IS8-10 | IC AMP DIFF 10MHZ LP FLTR 8-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT6402CUD-6 | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
| LT6402CUD-6#PBF | 功能描述:IC DIFF AMP/ADC DVR 6DB 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 其它有关文件:Automotive Product Guide 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:通用 电路数:1 输出类型:满摆幅 转换速率:3 V/µs 增益带宽积:10MHz -3db带宽:- 电流 - 输入偏压:1pA 电压 - 输入偏移:70µV 电流 - 电源:2.5mA 电流 - 输出 / 通道:48mA 电压 - 电源，单路/双路(±):2.7 V ~ 5.5 V，±1.35 V ~ 2.75 V 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:SOT-23-6 供应商设备封装:SOT-6 包装:Digi-Reel® 其它名称:MAX4475AUT#TG16DKR |
| LT6402CUD-6#TRPBF | 功能描述:IC DIFF AMP/ADC DVR 6DB 16-QFN RoHS:是 类别:集成电路 (IC) >> Linear - Amplifiers - Instrumentation 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:1 系列:- 放大器类型:电流检测 电路数:1 输出类型:- 转换速率:- 增益带宽积:125kHz -3db带宽:- 电流 - 输入偏压:- 电压 - 输入偏移:100µV 电流 - 电源:1.1µA 电流 - 输出 / 通道:- 电压 - 电源，单路/双路(±):- 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:4-WFBGA，CSPBGA 供应商设备封装:4-UCSP（2x2） 包装:剪切带 (CT) 其它名称:MAX9634WERS+TCT |
| LT6402CUD-6-PBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
| LT6402CUD-6-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:300MHz Low Distortion, Low Noise Differential Amplifi er/ ADC Driver (AV = 6dB) |
发布紧急采购，3分钟左右您将得到回复。